Specifications

TIGHTENING TORQUE
TSB Revision
GENERAL
00-32
TIGHTENING TORQUE
M1001001100618
Each torque value in the table is a standard value for
tightening under the following conditions.
1. Bolts, nuts and washers are all made of steel and
plated with zinc.
2. The threads and bearing surface of bolts and
nuts are all in dry condition.
The values in the table are not applicable:
1. If toothed washers are inserted.
2. If plastic parts are fastened.
3. If bolts are tightened to plastic or die-cast
inserted nuts.
4. If self-tapping screws or self-locking nuts are
used.
STANDARD BOLT AND NUT TIGHTENING
TORQUE
THREAD SIZE STANDARD TIGHTENING TORQUE
NOMINAL BOLT
DIAMETER (mm)
PITCH
(mm)
HEAD MARK "4" HEAD MARK "7" HEAD MARK "8"
M5 0.8 2.5 ± 0.5 N⋅ m (23 ± 4
in-lb)
5.0 ± 1.0 N⋅ m (44 ± 9
in-lb)
6.0 ± 1.0 N⋅ m (53 ± 9
in-lb)
M6 1.0 5.0 ± 1.0 N⋅ m (44 ± 9
in-lb)
8.5 ± 1.5 N⋅ m (76 ± 13
in-lb)
10 ± 2 N⋅ m (89 ± 17
in-lb)
M8 1.25 11 ± 2 N⋅ m (98 ± 17
in-lb)
20 ± 4 N⋅ m (15 ± 3 ft-lb) 24 ± 4 N⋅ m (18 ± 3 ft-lb)
M10 1.25 23 ± 4 N⋅ m (17 ± 3 ft-lb) 42 ± 8 N⋅ m (31 ± 6
ft-lb)
53 ± 7 N⋅ m (39 ± 5 ft-lb)
M12 1.25 42 ± 8 N⋅ m (31 ± 6 ft-lb) 80 ± 10 N⋅ m (59 ± 7
ft-lb)
93 ± 12 N⋅ m (68 ± 9
ft-lb)
M14 1.5 70 ± 10 N⋅ m (52 ± 7
ft-lb)
130 ± 20 N⋅ m (96 ± 15
ft-lb)
150 ± 20 N⋅ m (111 ± 14
ft-lb)
M16 1.5 105 ± 15 N⋅ m (78 ± 11
ft-lb)
195 ± 25 N⋅ m (144 ± 18
ft-lb)
230 ± 30 N⋅ m (170 ± 22
ft-lb)
M18 1.5 150 ± 20 N⋅ m (111 ± 14
ft-lb)
290 ± 40 N⋅ m (214 ± 29
ft-lb)
335 ± 45 N⋅ m (247 ± 33
ft-lb)
M20 1.5 210 ± 30 N⋅ m (155 ± 22
ft-lb)
400 ± 60 N⋅ m (295 ± 44
ft-lb)
465 ± 65 N⋅ m (343 ± 48
ft-lb)
M22 1.5 290 ± 40 N⋅ m (214 ± 29
ft-lb)
540 ± 80 N⋅ m (398 ± 59
ft-lb)
630 ± 90 N⋅ m (465 ± 66
ft-lb)
M24 1.5 375 ± 55 N⋅ m (277 ± 40
ft-lb)
705 ± 105 N⋅ m (520 ±
77 ft-lb)
820 ± 120 N⋅ m (605 ±
88 ft-lb)
Piston
displacement
2.4L
Transaxle Model No. F5M42 W5M42
Type 5-speed
manual
Fuel system Fuel supply
system
Electronic controlled multiport fuel injection
ITEM LS-FWD MODEL LS-AWD MODEL