Specifications

MAINTENANCE SERVICE
TSB Revision
GENERAL
00-44
10. ENGINE OIL (CHANGE)
M1001002600371
1. Start the engine and allow it to warm up until the
temperature of the coolant reaches 80
° C (176° F) to 90° C
(194
° F).
WARNING
Use care as oil could be hot.
2. Remove the engine oil filler cap.
3. Remove the drain plug to drain oil.
AC103361
DRAIN PLUG
GASKET
OIL PAN SIDE
AD
OIL PAN SIDE
DRAIN PLUG
GASKET
<FWD>
<AWD>
4. Install a new drain plug gasket so that it faces in the
direction shown in the illustration, and then tighten the drain
plug to the specified torque.
Tightening torque: 39 ± 5 N⋅ m (29 ± 3 ft-lb)
-20 0
0
20
20
40
40
60 80 100 120
3010 50-10-20-30
38-18
F
C
SAE 10W-30
SAE 5W-20, 5W-30
AC308971
AB
5. Refill the specified quantity of oil.
Specified Engine Oil: Engine oils displaying ILSAC
certification symbol or conforming to the API clas
-
sification SL, SL/CF
Total quantity: 4.3 dm
3
(4.5 quarts)
NOTE: SAE 5W-20, SAE 5W-30 and SAE 10W-30 engine
oil can be used in outdoor temperatures ranging from
− 18 to
38
° C (0 to 100 ° F). However, for optimum fuel economy and
cold starting, select the low SAE viscosity grade oil for the
expected temperature range. SAE 5W-20 or SAE 5W-30
engine oil is recommended.
6. Install the engine oil filler cap.
7. Start the engine and run it at idle for a few minutes.