Specifications

HOW TO USE TROUBLESHOOTING/INSPECTION SERVICE POINTS
TSB Revision
GENERAL
00-8
HOW TO USE THE INSPECTION PROCEDURES
M1001013500118
The causes of many of the problems occurring in electric circuitry are generally the connectors, components,
the ECU, and the harnesses between connectors, in that order. These inspection procedures follow this
order. They first try to discover a problem with a connector or a defective component.
ACX00861
AE
(1) Relevant circuit(s) of the component which
the DTC indicates are described.
(3) Shows the location of the connector(s) from
the circuit(s) above.
(4) Explains about the operation principle of the
component or its relevant parts in that circuit.
B-48(B)
(2) For connector color, refer to GROUP 80A,
How to read configuration diagrams.