Manual

Edit NetCommand ®, Add an A/V Receiver, continued

Name Screen

Figure 10

The Name screen allows you to change the default

name for the A/V receiver to a custom name of up to

eight characters (including a blank space), selecting

from letters, numbers, and nine different characters.

Using the TV's remote, press ADJUST • or V to

select each letter, then press ENTER to move to the

next position. Press CANCEL to delete the current

letter and move back one character position. When

in the first position, the CANCEL button will return the

name to the default name.

Figure 10. Name screen

Finish Screen

Figure 12

To finalize your selections and complete the A/V

receiver setup, select Finish from the Finish screen.

Note: If you connected the audio output of

a device directly to the A/V Receiver, you

must use the "Change" function of the Edit

NetCommand menu and select the device to

assign the correct A/V Receiver input to be

used with each device.

Monitor Out to AVR Screen

Figure 11

Use this screen to select which A/V Receiver input is

connected to Audio 2 Monitor Output on the TV back

panel. Press ADJUST _ to select Next> and move to

the Finish screen.

Figure 11. Monitor Out to AVR screen

Figure 12. Finish screen