Specifications

Copy-Protected Material

When attempting to record copy-protected material,

the Record functions of the NetCommand and IEEE

1394 systems may be prevented or stopped. If you

have a recording that is tagged “Record Once”,

NetCommand will change the tag to “Record No More”.

Restrictions for Traditional VCRs

If turned On, the TV must be tuned to the source device.

• Your VCR should be connected directly to Audio

Video 1.

• The VCR must be set manually to “Line Input”.

Display the Device Selection menu, highlight the VCR

and press GUIDE to change VCR inputs.

• The TV can select channels on compatible cable

boxes for recordings. Leave the cable box turned on.

• If the source device or recording device does not have

separate power On and Off features, then leave that

device powered On.

Direct VCR Recording from an Antenna or Cable Source,

Copy-Protected Material and Restricitons for Traditional VCRs

Direct VCR Recording from an

Antenna or Cable Source:

Pressing REC (record) on the TV’s remote control will

function the same way as pressing the record button

on the VCR’s remote control or front panel.

To record directly from antenna or cable:

1. Press DEVICE on the TV’s remote to display the

Device Selection menu. Highlight the traditional

VCR and press POWER to turn on the VCR. If

necessary, press GUIDE to select the input the VCR

is on, such as Antenna input (or line input).

2. Press ENTER to switch the TV to the VCR.

3. Select the correct channel for recording on the

VCR and then press REC to start recording. You

will need to manually stop the recording at the end

of the program.

OR...

4. Press the DEVICE MENU button to display the

VCR’s menu to schedule a delayed recording

directly from antenna or cable.

To record from Ant-1, Ant-2 or other devices, see

NetCommand Controlled Recordings.