DLP® HIGH-DEFINITION TELEVISION MODELS C Series WD-C657 Y Series WD-Y577, WD-Y657 733 Series WD-57733, WD-65733, WD-73733 734 Series WD-57734, WD-65734, WD-73734 OWNER’S GUIDE • • • • For questions: - Visit our website at www.mitsubishi-tv.com. - E-mail us at MDEAservice@mdea.com. - Call Consumer Relations at 800-332-2119. For information on System Reset, please see the back cover. To order replacement or additional remote controls, lamp cartridges, or Owner’s Guides, visit our website at www.
For Your Records Record the model number, serial number, and purchase date of your TV. The model and serial numbers are on the back of the TV. Refer to this page when requesting assistance with the TV. MODEL NUMBER SERIAL NUMBER PURCHASE DATE RETAILER NAME LOCATION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Contents Important Information About Your TV General Warnings and Cautions, Notes on Installation and Operation. . . . . . . . . . . . Important Safeguards.. . . . . . . . . . . . . . . 1 Television Overview Package Contents. . . . . . . . Special Features of Your TV. TV Front Panel.. . . . . . . . . . TV Back Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important Information About Your TV Installation Notes Cleaning Recommendations Stand Requirement CAUTION: Use these Mitsubishi TV models only with the Mitsubishi stand models shown here. Other stands can result in instability and possibly cause injury. Normally, light dusting with a dry, non-scratching duster will keep your TV clean.
Important Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions. Read all safety and operating instructions before operating the TV. Retain the safety and operating instructions for future reference. Follow all operating and use instructions. 2. Heed Warnings. Adhere to all warnings on the appliance and in the operating instructions. 3. Cleaning.
1 Television Overview Package Contents High-Definition Video Inputs Please take a moment to review the following list of items to ensure that you have received everything. 1. Remote Control 2. Two AA Batteries 1 AA AA 3. Owner’s Guide 2 4. Quick Reference Guide 5. Quick Connect Guide 6. Product Registration Card 7.
1. Television Overview TV Front Panel Control Panel Front Inputs Buttons on the front control panel duplicate Flip down cover to commonly used keys on use buttons and the remote control. The inputs on the front upper labels show control panel. functions when no TV menus are displayed; the lower labels indicate functions when TV menus are displayed or when a special function has been activated. See chapter 4, “TV Operation and Features,” for the functions of these buttons.
1. Television Overview Front-Panel Indicators Off Steady On Slow Blinking Fast Blinking LAMP Indicator LED Color TV Condition Additional Information None Normal TV on or standby condition. Normal operation. Green TV just powered off and lamp is cooling. Starts to blink 30 seconds after turning off TV. TV can be turned on before blinking starts or after blinking stops, but not while the indicator is blinking. Normal operation. Yellow 1.
1. Television Overview TV Back Panel Y Pb Pr (480i/480p/720p/1080i) Pr Y Pb AUDIO R L (MONO) COMPONENT 1 2 COMPONENT 2 ANT 2/ AUX IR Emitter Jack included on Y series and 734 series models only.
1. Television Overview TV Back Panel, continued 5. INPUT 1, 2 (Audio and Video) Input 1 and 2 can be used to connect a VCR, Super VHS (S-VHS) VCR, DVD player, standard satellite receiver, or other A/V device to the TV. Each TV INPUT group consists of jacks for composite video, S-Video, and analog stereo audio. Note that when you connect to the S-video jack, the composite video jack is automatically disabled.
2 11 TV Set-Up Guidelines for Setting Up and Using Your New Widescreen TV Getting Started TV Operation 1. Review the important safety, installation, and operating information at the beginning of this book. 2. Choose a location for your TV. • Allow at least four inches of space on all sides of the TV to help prevent overheating. Overheating may cause premature failure of the TV as well as shortened lamp life. • Avoid locations where light may reflect off the screen.
2. TV Setup • Parent menu, the Lock > Front Panel menu, and Setup > Edit > Lock. Video Settings. Change video adjustments to get the best picture for your viewing conditions. See “AV Menu.” Note: You may wish to change the Picture Mode from the default Brilliant to either Bright or Natural, which are suitable for most home viewing environments. 2. To program the remote control to operate A/V devices not under NetCommand control, see Appendix D, “Programming the Remote Control.
2. TV Setup Initial TV Setup, continued Change the Menu Language Choose to display on-screen menus in either English or Spanish (Español). 5. When memorization is complete you can: • Press MENU once to return to the top row of icons. • Press MENU again to return to the Main menu. • Press EXIT to watch TV. After channels have been memorized: • To tune to memorized channels, press CH / while watching TV on the ANT 1 or ANT 2 inputs.
2. TV Setup Setting Up TV Inputs, continued Note: HDMI devices are often recognized automatically by the TV. The TV’s remote control may operate some device functions without further setup. You can add more control functions if desired. Program the TV’s remote control or, in the case of a Y or 734 series TV, perform NetCommand IR “learning” to add functions. For connection and setup of a personal computer, see the information later in this chapter. 1.
2. TV Setup Using the TV with a Personal Computer Connecting a Computer to the TV Use one of the connection methods listed below based on your computer’s video output.
2. TV Setup Using the TV with a Personal Computer Computer Video Adjustments Tip: Set the computer’s screen saver to display a pattern after several minutes of inactivity. This acts as a reminder that the TV is powered on and the lamp is in use. The lamp is in use whenever the TV is powered on, even if the screen appears dark. 1. Power on the computer if it is not already on. 2. Select PC from the Input Selection menu.
3 TV Connections 17 Before you Begin Auto Input Sensing Sound Quality The TV’s Auto Input Sensing feature automatically recognizes most connections and prompts you to identify the type of device connected. See chapter 2, “TV Setup,” for more on Auto Input Sensing. For best audio quality, route audio signals from the input device directly to your A/V receiver or sound system whenever possible.
3. TV Connections Standard Cable Box, Satellite Receiver, or Other Device with S-Video Required: S-Video cable and left/right analog stereo audio cables. 1. Connect the cable from the outside cable or satellite service to CABLE IN or SATELLITE IN on the cable box or satellite receiver. 2. Connect an S-Video cable from S-VIDEO OUT on the cable box or satellite receiver back panel to INPUT S-VIDEO on the TV back panel. 3.
3. TV Connections Wall Outlet Cable (no cable box) Antennas with Separate UHF and VHF Leads It is very important to connect the incoming cable for your primary viewing source to ANT 1/MAIN. Required: UHF/VHF combiner 1. 1. Connect the UHF and VHF antenna leads to the UHF/VHF combiner. 2. Push the combiner onto ANT 1/MAIN on the TV back panel. Connect the primary incoming coaxial lead cable to ANT 1/MAIN on the TV back panel. 2.
3. TV Connections DVD Player with Component Video Component video cables and analog audio cables are required. 1. Connect the component video cables from Y Pb Pr VIDEO OUT on the back of the DVD player to the COMPONENT jacks on the TV back panel, matching the green, blue, and red colored connections. 2. Connect left (white) and right (red) stereo audio cables from AUDIO OUT on the back of the DVD player to COMPONENT AUDIO L (MONO) and AUDIO R on the TV back panel. $0.
3. TV Connections VCR to an Antenna or Wall Outlet Cable Required: Two-way RF splitter, 3 coaxial cables, right and left analog audio cables, either S-video or video cable. 4. To use the TV speakers with the VCR, connect left (white) and right (red) audio cables from AUDIO OUT on the VCR to INPUT AUDIO L (MONO) and AUDIO R on the TV back panel. If your VCR is mono (non-stereo), connect only the white (left) cable. 5.
F PG EFP CMF 22 3. TV Connections VCR to a Cable Box (Audio & Video) Required: Two coaxial cables, right and left audio cables, S-Video or composite video cable, plus cables required to connect the TV to the cable box. 1. Connect the incoming coaxial cable to IN on the cable box. 2. Connect one coaxial cable from OUT on the cable box to ANTENNA IN on the VCR back panel. 3. Connect the cable box outputs to the TV as shown in one of the options listed below.
3. TV Connections A/V Receiver (Sound System) Most setups require either a digital audio cable or analog stereo audio cables. The TV makes all audio available in digital and analog formats: Analog audio coming into the TV is available as output in digital format on the DIGITAL AUDIO OUT jack. Digital incoming audio is available as analog output on the AVR AUDIO OUTPUT/AUDIO L (MONO) and AUDIO R jacks.
3. TV Connections Camcorder Inputs on the front of the TV offer the most convenient way to connect a camcorder. If your TV model does not have a front input matching the camcorder’s output, use one of the matching jacks on the back of the TV. Jacks on the TV front panel offer the most convenient way to connect a camcorder Component Y Pb Pr Video Connection Required: Analog stereo audio and component video cables supplied with the camcorder.
4 TV Operation and Features Choosing a Viewing Source Sleep Timer The Sleep Timer turns the TV off after the length of time you set. Input Selection menu Choose a viewing source from the Input Selection menu. The current TV input appears as a full-color icon in this menu. 1. Press INPUT to display the Input Selection menu. If there are only two inputs to the TV, INPUT switches between them without displaying the menu. 2. Highlight an input icon using . 3.
4. TV Operation and Features Remote Control 1. POWER: Turns TV power on and off. 2. Slide Switch: Selects the A/V device to be controlled by the remote control. Set the slide switch to TV for operation of the TV and NetCommandcontrolled devices. Control of additional devices requires programing (see Appendix D, “Programming the Remote Control.” 3. SLEEP: Sets the TV to turn off within 2 hours. 4. Digits/Letters: Press digits for channel numbers, then press ENTER for faster tuning.
4. TV Operation and Features Remote Control, continued Resetting the Remote Control Record/Playback Keys Use any of these methods to enable the recording and playback commands: • Program the remote control for your DVR, VCR, or DVD player/recorder and set the slide switch to VCR, DVD, CABLE, or SAT. • Y and 734 series TVs: Perform NetCommand IR “learning” for the device. • Check HDMI devices for compatibility with the TV’s NetCommand for HDMI feature (see below). 23.
4. TV Operation and Features Status Display 1 Press the INFO key to see the on-screen status display. The most common displays are shown here. Seldom or never do all the status indicators appear at the same time. 2 Ant 1 5 10 6 HD 16:9 Standard TV-PG 9 Stereo 11 3 4 7-1 KABC-HD St. Louis vs. Tampa Bay FAV1 English 7 8 8 12 13 14 Tuesday 9:10 PM Sleep 30 min 16 15 On-screen status display. Sample information shown for a digital program source.
4. TV Operation and Features FAV (Favorite Channels) Use the six Fav channel banks to store groups of your favorite channels from ANT 1 and ANT 2. You can set up a Fav channel bank for each of your favorite program types or set up a bank for each TV user. You may prefer to perform FAV channel setup from a menu. See chapter 5, “TV Menu Settings,” and the Setup > Edit options.
4. TV Operation and Features TV Signals and Display Formats This is a widescreen TV, also known as a 16:9 TV. This shape reflects the new types of images available from HDTV and many DVDs. There are still many older style narrow-screen images (called 4:3 aspect ratio) you will encounter. While there is no perfect solution for displaying a squarish, narrower image on a wide screen, Mitsubishi offers several display formats from which you can choose.
4. TV Operation and Features TV Display Formats See descriptions on the preceding page.
4. TV Operation and Features Viewing JPEG Picture Files JPEG Photos and the USB Photo Port 1. Connect your USB card reader or USB drive to the USB Photo port on the front of the TV. The USB Photo menu displays while files are being read. Wait until you see the completion message on screen before continuing. L-AUDIO-R Note: VIDEO/Y Pb Pr I N P U T 3 USB DVI AUDIO JPEG Thumbnail Menu HDMI 4 Some manufacturers’ devices may be incompatible with the TV.
4. TV Operation and Features Slide Show USB Photo Menu Compatible Picture Files Use these keys during the slide show: • Keys for JPEG Picture Slide Show Begin or resume slide show playback Pause or resume playback while in automatic advance mode. or ENTER FORMAT Advance to the next slide. Go to the previous slide. • Rotate the slide clockwise in 90˚ increments. • Stop slide show and display the USB Photo menu. INFO Display status for the viewing device and current image.
5 TV Menu Settings Remote Control Keys for the TV Menu System The following keys help you use the menu system. Some keys are duplicated on the TV’s front panel. Key Function 1 MENU Display or close the Main menu or move back one menu level. 2 exit Close all menus and return to TV viewing. (Adjust Left/Right Keys) • • • 5 6 3 (Adjust Up/Down Keys) 4 7 4 ENTER Start an automatic function or select a check box.
5. TV Menu Settings 35 AV Menu An on-screen slider displays when making some audio and video adjustments. Numeric values represented on the slider range from 0 (minimum) to 63 (maximum), with 31 as the mid-point. Note: The PerfecTint, SharpEdge, and Deep Field Imager video adjustments (marked §) are offered on 734 series models only. AV menu for audio and video adjustments AV Menu Options Video See the description of video adjustments later in this section.
5. TV Menu Settings Video Menu To make video adjustments: • From the Video menu: 1. Press to highlight an option. 2. Press to make an adjustment 3. Press MENU to return to the AV menu. • While watching TV: Press the VIDEO key repeatedly to display the video option you want to change. Press to change settings. Note: See chapter 2, “TV Setup,” for additional adjustments available for images from a computer.
5. TV Menu Settings 37 Audio Menu To make audio adjustments: • From the Audio menu: 1. Press to highlight an option 2. Press to make an adjustment 3. Press MENU to return to the AV menu. • While watching TV: Press the AUDIO key repeatedly to display the audio option you want to change. to change settings. Press AV menu, Audio options Audio Menu Options Speakers The Speakers option displays if an A/V receiver connection has been detected. TV Turn on the internal TV speakers.
5. TV Menu Settings Captions Menu Captions on Analog Channels Captions on Digital Channels The TV can decode captions from ANT 1/ANT 2 and INPUT 1/INPUT 2. Broadcasters can send either standard closed captions or text service. Standard closed captions follow the dialogue of the program and display in a small section of the screen. Text-service closed captions often contain information such as weather or news and cover a large portion of the screen.
5. TV Menu Settings 39 Setup Menu Use the Setup menu to: • Select English or Spanish for menus and on-screen text. • Scan the channels available for the antenna or cable service connected to the ANT 1 or ANT 2 jacks. • Edit channel options, including channel locking. • Set the TV’s internal clock. • Set the TV Timer to turn on the TV automatically at a designated time. • Set the energy mode for power consumption when the TV is powered off.
5. TV Menu Settings Setup Menu, continued Virtual Channel Number (digital channels only) A channel number sent by a local broadcaster to help identify their digital channel. Usually the virtual number is associated with the corresponding analog channel number. For example, a broadcaster may be associating digital channel 2-1 with their analog channel 2. Physical Digital Channel Number The channel number officially assigned to the actual broadcast frequency; shown on screen in parentheses.
5. TV Menu Settings 41 Setup Menu, continued Use either the manual or auto method to set the clock. Set the clock if you wish to: • Use the TV’s Timer function. • Maintain accurate ChannelView listings. Setup menu, Clock options Setup Menu Options Settings Clock Manual. To set the clock manually: 1. Select Manual. 2 Set the time of day. 3. Set the date. 4. Select your time zone. 5. Select either Applies or Ignore for Daylight Savings Time.
5. TV Menu Settings Setup Menu, continued Use the Timer to set a time for the TV to turn on automatically. Use this menu to set a day, time, input, and channel for the Timer. If the TV is already on at the requested time, the TV will automatically tune to the designated channel. • The TV clock must be set before you can use the Timer feature. • When the Timer turns on the TV, press any key on the remote control to keep it on. Otherwise, the TV will turn off after five minutes.
5. TV Menu Settings 43 Inputs Menu Note: • NetCommand IR control of home-theater devices is available on Y series and 734 series models only. • When you change an input name in the Name menu and then exit the Name menu: The name is changed The icon in the Input Selection menu is changed Settings are changed to the defaults for the new device type. On models offering NetCommand control, all “learning” for the input is also erased. Change input names using the Inputs > Name menu.
5. TV Menu Settings Lock Menu TV locks available from the Lock menu are: Parent Other Time Front Panel Note: Lock by Ratings Restrict access to programming based on V-Chip rating signals sent by the broadcaster. Lock by Time Restrict TV use by time of day. Lock Front Panel Disable the controls on the front of the TV. Use this option if small children in the home try to press front-panel buttons. Channel Lock is an additional lock that blocks access to specific channels.
5. TV Menu Settings Lock Menu, continued Parent Menu Options (U.S.-based rating system) Option Name and Description Lock Off, On Disables or enables program blocking based on V-Chip signals and the U.S. rating system. TV Rating TV-Y Youth. For children under 7. TV-Y7 Youth 7 and older. TV-G General Audience. For the entire family. TV-PG Parental Guidance. Parental Guidance recommended; may not be suitable for some children. TV-14 Adolescent 14 and older.
5. TV Menu Settings Lock Menu, continued Other Menu Options (alternate rating system) This TV can recognize new rating systems that may come into effect in the future. The Other option remains grayed out until the TV receives a signal using an alternate rating system. Such alternate rating systems will apply to digital programming only.
6 NetCommand About NetCommand • • • • • NetCommand home-theater control is available on the following models: Y series WD-Y577, WD-Y657 734 series WD-57734, WD-65734, WD-73734. This chapter applies only to these models. NetCommand setup is optional. You can perform NetCommand setup when the TV first recognizes a device during Auto Input Sensing or at any convenient time afterward.
6. NetCommand COMPONENT 1 IR Emitter Placement (NetCommand®) COMPONENT 2 0UIFS " 7 EFWJDF An IR emitter cable is included with the TV. The NetCommand system uses emitters connected to the IR EMITTER jack to control other devices such as DVD players, cable boxes, satellite receivers, and VCRs. 1. Connect the plug end of the supplied IR emitter cable to the IR EMITTER NetCommand® jack on the TV back panel. 2.
6. NetCommand 49 Initial NetCommand Setup for Most Devices To perform this procedure, you need: • The remote controls for both the TV and the device you want to control. • The IR emitter cable supplied with the TV. Note: To set up an A/V receiver, see “Set Up NetCommand Control of an A/V Receiver” later in this chapter. 1. Connect and position the IR emitters for the devices you wish to control. See “IR Emitter Placement” in this chapter. 2. Set the TV’s remote control slide switch to the TV position.
6. NetCommand NetCommand Specialized Device Keys Refer to this chart when “learning” device keys. “Learn” some, all, or none of the keys used for each device type. The chart has space for you to write in functions you assign to the F1–F4 keys. See the following page for more on keys marked in the “Special Operation Method” column.
6. NetCommand 51 Operating NetCommand-Controlled Devices To Control Most Device Types As an example of NetCommand control, if you are watching your cable box and you wish to tune to the next channel higher, press CH/PAGE . NetCommand then sends the “learned” channel-up control signal to the cable box. 1. With an IR emitter properly positioned in front of the device, use the Inputs > Learn screen to perform NetCommand setup for the device. 2.
6. NetCommand Operating NetCommand-Controlled Devices, continued Key Name in Learning Screen Special Operation Description and Setup How to Use Guide Displaying the Disc Menu (DVD or high-definition disc format) While watching the device, press GUIDE to display the disc menu. “Learn” the Disc Menu, Top Menu, or other key as named on the original remote in the Guide learning position.
6. NetCommand Set Up NetCommand Control of an A/V Receiver Perform this setup to: • Operate the A/V receiver’s power and volume functions with the TV’s remote control. • Enable the A/V receiver to switch automatically to the correct audio input when you select a device in the TV’s Input Selection menu. To set up control of an A/V receiver you need: • The remote controls for both the TV and the A/V receiver. • The IR emitter cable supplied with the TV.
6. NetCommand Setup to Control Automatic Switching of A/V Receiver Audio Inputs Two different setups are described here: Setup 1: Automatic A/V Receiver Switching to TV Audio Input Setup 2: Automatic A/V Receiver Switching for a device sending audio directly to the A/V receiver • • • • Audio Available from TV only: Use Setup 1. Audio from ANT 1 and ANT 2 must be sent to the A/V receiver from the TV’s DIGITAL AUDIO OUT or analog AVR AUDIO OUTPUT.
6. NetCommand Set Up NetCommand Control of an A/V Receiver, continued • • If the text stops flashing before the check mark appears, repeat this step. To erase the IR code just “learned,” press CANCEL while the name is highlighted. 5. Press to highlight the name Input1. You can enter a custom name using the letters/numbers on the remote control. It is best to assign names to “learned” inputs that match the input names displayed on the A/V receiver.
6. NetCommand Set Up NetCommand Control of an A/V Receiver, continued 5. Press to highlight the name Input2. Assign a custom name that matches the input name displayed on the A/V receiver. For this example, enter the custom name DVD using the guidelines given earlier. 6. Press to move the highlight to the second Assign column. 7. Use to highlight DVD in the list of devices recognized by the TV. The triangular marker always shows the assigned sound source. 8.
Appendices Appendix A: Appendix B: Appendix C: Appendix D: Appendix E: Specifications. . . . . . . . . . . . . . . . . . . Bypassing the Parental Lock. . . . . . . . . . Lamp Cartridge Replacement and Cleaning. Programming the Remote Control. . . . . . . Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendices Appendix A: Specifications Size, Weight, and Power Consumption Model Dimensions (inches) Height Width Depth Outputs Weight (lbs.) Power WD-C657 39.5 58.2 15.3 76 275 w WD-57733 35 51.2 13.9 62 275 w WD-65733 39.5 58.2 15.3 76 275 w WD-73733 43.6 65.2 17.5 108 275 w Description Qty. Audio Speakers 2 Analog Audio (Signal) 1 pair Digital Audio Output 1 Output Specifications 5.5" x 2.2" RCA Pin Plug, 500 mV rms + 200 mV (full scale) for analog sources, 1.
Appendices Appendix B: Bypassing the Parental Lock 59 Bypassing the Parental Lock Lock Bypass Instructions Have Been Filed for Future Reference After you set the lock, you must use your pass code to view a locked program, view the locked TV, view a locked channel, cancel the lock, or enter the Lock menus. IMPORTANT Cut along the dotted line and file bypass instructions in a safe place for future reference. If you forget your pass code, you can view the locked TV without entering your pass code.
Appendices This page intentionally left blank
Appendices 61 Appendix C: Lamp-Cartridge Replacement and Cleaning WARNING THE ACCESS PANEL IS PROVIDED WITH AN INTERLOCK TO REDUCE THE RISK OF EXCESSIVE ULTRAVIOLET RADIATION. DO NOT DEFEAT ITS PURPOSE OR ATTEMPT TO SERVICE WITHOUT REMOVING PANEL COMPLETELY. CAUTION BURN DANGER! HOT SURFACES INSIDE! Touch lamp cartridge handle only. Do not touch lamp or lamp cartridge housing. Keep lamp cartridge horizontal during removal. Do not tilt as glass may come out and cause injury.
Appendices Appendix C: Lamp-Cartridge Replacement and Cleaning, continued Lamp-Cartridge Replacement Removing the Old Lamp Cartridge 1. 2. 3. 4. 5. Figure 1 Turn off TV power and allow the lamp to cool for at least one hour before proceeding. After the lamp has cooled, remove the cover of the lamp compartment, located on the back of the TV. Refer to figures 1 and 2. Use a #2 (large) Phillips screwdriver to loosen the screw securing the cover.
Appendices Appendix D: Programming the Remote Control This appendix explains programming the TV’s remote control to operate other A/V devices. This is distinct from NetCommand control. The TV’s remote control can operate other devices by three different methods: VCRs and DVRs CH / POWER SLEEP (FAST Forward) (Pause) (Play) • Remote Control Programming: You must move the slide switch to the position specific to the type of device.
Appendices Appendix D: Programming the Remote Control, continued Programming the Remote Control 1. Move the slide switch at the top of the remote to the position for the product you want to control. Refer to the table below. Only one of each device type can be controlled in each slide-switch position. 6. Once you have found the correct code, write it in the space below for future reference.
Appendices 65 Appendix D: Programming the Remote Control, continued Programming Codes Audio Amplifiers Code Brand Acurus Adcom Altec Lansing Aragon Bel Canto Design Bose Carver Classe Curtis Mathes Durabrand Elan GE Harman/Kardon JVC Klipsch Left Coast Lenoxx Lexicon Logitech Marantz Mark Levinson McIntosh Mondial Optimus Philips Pioneer Polk Audio RCA Realistic Sharp Sony Soundesign Technics Toshiba Victor Wards Yamaha 30765 31100, 30577 31742 30765 31583 30674 30892 31462, 31461 30300 31561 30647 30078
Appendices Appendix D: Programming the Remote Control, continued Programming Codes, continued CD Players Brand Aiwa Akai Arcam Audio-Technica Burmester California Audio Labs Carver Classic Denon DKK DMX Electronics Emerson Fisher Garrard Gemini Genexxa GPX Harman/Kardon Hitachi Integra JVC Kenwood KLH Koss Krell LG Linn LXI Magnavox Marantz Mark Levinson McIntosh MCS MGA Miro Mission Mitsubishi MTC NAD Nikko NSM Onkyo Code 30157 30156 30157 30170 30420 30303, 30029 30437, 30299, 30179, 30157 31297 3
Appendices Appendix D: Programming the Remote Control, continued Programming Codes, continued Cable Boxes Brand Optimus Pace Panasonic Panther Paragon Philips Pioneer Popular Mechanics Pulsar Quasar RadioShack RCA Realistic Recoton Regal Regency Rembrandt Runco Samsung Scientific Atlanta Seam Sejin Signal Signature SL Marx Sony Sprucer Starcom Stargate Starquest StarSight Supercable Supermax Sylvania Tandy TeleCaption Teleview Texscan TFC Thomson Timeless Tocom Torx Toshiba Tristar Tusa TV86 Unika Unit
Appendices Appendix D: Programming the Remote Control, continued Programming Codes, continued DVD Players/Recorders Brand Code DVD Players/Recorders Brand Code Onkyo Tredex NEC Nesa Next Base NexxTech Norcent OptoMedia Electronics Oritron Panasonic 20785 20717 20826 21402 21265, 21107, 21003, 20872 20792, 20627, 20503 20896 20651 21762, 20703, 20632, 20503, 20490 Philips 21354, 21267, 20675, 20646, 20539, 20503, PianoDisc 21024 Pioneer 21571, 20632, 20631, 20571, 20525 Polaroid 21086, 21061, 210
Appendices Appendix D: Programming the Remote Control, continued Programming Codes, continued Satellite Receivers Brand Code Toshiba UltimateTV Uniden US Digital USDTV Voom Zenith 11749, 11285, 10819, 10790, 10749 11640, 11392 10724, 10722 11535 11535 10869 11856 VCRs and DVRs Brand Code ABS Admiral Adventura Aiko Aiwa Akai Alienware America Action American High Asha Audiovox Beaumark Bell & Howell Broksonic Calix Canon Capehart Carver CCE Citizen Colt Craig Curtis Mathes Cybernex CyberPower Daewoo
Appendices Appendix D: Programming the Remote Control, continued Programming Codes, continued VCRs and DVRs Brand Code Polk Audio Portland Profitronic Proscan Protec Pulsar Quarter Quartz Quasar RadioShack Radix Randex RCA Realistic ReplayTV Ricavision Ricoh Runco Salora Samsung Samtron Sanky Sansui Sanyo Scott Sears Sharp Shintom Shogun Singer Sonic Blue Sony Stack 9 STS 20081 20020 20240 20761, 20760, 20202, 20060 20072 20039 20046 20046 21162, 20162, 20077, 20035 21037, 20000 20037 20037 20880,
Appendices 71 Appendix E: Troubleshooting TV Reset Comparison Guide You can resolve many common TV problems using the reset functions described in the following table. See also the additional troubleshooting suggestions later in this appendix. IMPORTANT Before you change sound or picture settings: If picture or sound settings seem wrong for a broadcast channel (a channel from ANT 1, ANT 2, a cable box, or satellite receiver), first check other channels from the same input before changing settings.
Appendices Appendix E: Troubleshooting, continued Reset Name When to Use Front-Panel Lock To re-enable the frontRelease panel controls after activation of the FrontPanel Lock How to Use Resulting Action • When Energy Mode is set to Fast Power On, press and hold the MENU button on the front panel for over eight seconds. • When Energy Mode is set to Low Power, press POWER on the front panel to turn on the TV. Press and hold the MENU button on the front panel for over eight seconds.
Appendices 73 Appendix E: Troubleshooting, continued General TV Operation Symptom Remarks 1. A fan is running even while the TV is powered The room is too warm. When the TV is off, internal components off. continue to draw power and must be cooled by the fan. 2. The TV remote control does not work. • • • • • Check that the batteries are fresh and installed correctly. Check that the slide switch on the remote is set to TV. Be no more than 20 feet from the TV when using the remote control.
Appendices Appendix E: Troubleshooting, continued TV Channels Symptom Remarks 3. Name options are not available for some channels. You can name only memorized analog channels and memorized digital channels not named by the broadcaster. 4. When ChannelView™ list is displayed, information appears incomplete • • Available information is sent from the broadcaster or cable provider. No other data is available. Make sure the TV clock is set correctly. TV Power On/Off 1.
Appendices 75 Appendix E: Troubleshooting, continued Picture Symptom Remarks 5. VCR or DVD player’s on-screen menus jitter up and down. Possible cause: Many VCRs and DVD players provide onscreen menus at only half-resolution. These lower-resolution graphics may appear to jitter up and down when the TV converts them to high-definition graphics. 6. When viewing a stopped VCR, white lines are rolling on the screen. • • • 7. Screen is black.
Appendices Appendix E: Troubleshooting, continued Indicators 4. Symptom Remarks STATUS indicator light is a steady/flashing red. • • • Unplug set from AC power. Plug back in an wait one minute for blinking to stop. Press SYSTEM RESET button and wait for blinking to stop. If blinking continues, service is required. Contact your dealer or a Mitsubishi Authorized Service Center to arrange for a service evaluation.
Trademark and License Information 77 Trademark and License Information LICENSOR’S SUPPLIERS DO NOT MAKE OR PASS ON TO END USER OR ANY OTHER THIRD PARTY, ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY OR REPRESENTATION ON BEHALF OF SUCH SUPPLIERS, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Digital Light Processing™ and DLP™ are registered trademarks of Texas Instruments.
Trademark and License Information Mitsubishi TV Software END-USER LICENSE AGREEMENT FOR EMBEDDED SOFTWARE IMPORTANT – READ CAREFULLY: This License Agreement is a legal agreement between you (either an individual or an entity) and Mitsubishi Digital Electronics America, Inc. (MDEA) for all software pre installed and/or provided along with this television (“Software”). By utilizing this television and Software, you agree to be bound by the terms of this License Agreement.
Mitsubishi DLP™ Projection Television Limited Warranty MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants as follows to the original purchaser of this television from an authorized MITSUBISHI Audio/Video Dealer, should it prove defective by reason of against defects arising from improper workmanship and/or material: a. Parts. The lenticular (i.e.
c. Proof of purchase date from an authorized MITSUBISHI dealer is required when requesting warranty service. Present your sales receipt or other document which establishes proof and date of purchase. THE RETURN OF THE OWNER REGISTRATION CARD IS NOT A CONDITION OF COVERAGE UNDER THIS LIMITED WARRANTY. However, please return the Owner Registration Card so that we can contact you should a question of safety arise which could affect you. d.
Index Index A A/V Memory Reset 71 A/V Receiver Adding NetCommand Control 53, 54, 55, 56 and the TV Speakers 37 and TV’s Remote Control 53, 63 Audio Lock 64 Codes 65 Closed Captions 38 Color Adjustments 35, 36 Reset Color 35, 71 Component Inputs (Y Pb Pr) 9 Computer and Display Formats 16, 58 Connecting 15 D F1–F4 Keys 26, 49 Fan Noise 4 Fast Power On 42 FAV (Favorite Channels) 29, 40 FORMAT Key 30, 31 Front Panel Lock 46 B G Codes 67 Connecting 20 DVI Device, Connecting 20 E
Index P Parent Menu 45 Pass Code Resetting 59 Setting 44 PAUSE Key 26 PerfectColor 35 PerfectTint 35 Photo Viewing 33 Picture AV Menu Controls 35 Format Displays 31 Picture Quality and Film Mode 35 Troubleshooting 74 Picture Mode 36 Power Consumption Energy Mode 42 Specifications 58 Power On/Off 12, 25 Troubleshooting 74 Sound Audio Settings 37 Controlling A/V Receiver Volume 14, 53 Simulated Stereo 37 Troubleshooting 75 Turn TV Speakers On/Off 37 Speakers Option Auto Input Sen
Website: www.mitsubishi-tv.com E-mail: MDEAservice@mdea.com For questions, call Consumer Relations at 800-332-2119 To order replacement or additional remote controls, lamp cartridges, or Owner’s Guides Visit our website www.mitsuparts.com or call 800-553-7278 SYSTEM RESET If the TV does not respond to the remote control, front panel controls, or will not power on/off, press the SYSTEM RESET button on the front panel. The green LED will flash quickly for about one minute.
