DLP ® HIGH-DEFINITION TELEVISION MODELS C Series WD-60C8, WD-65C8, WD-73C8 735 Series WD-60735, WD-65735, WD-73735 736 Series WD-65736, WD-73736 835 Series WD-65835, WD-73835 OWNER’S GUIDE • • • • For questions: -- Visit our website at www.mitsubishi-tv.com. -- E-mail us at MDEAservice@mdea.com. -- Call Consumer Relations at 800-332-2119. For information on System Reset, please see the back cover.
For Your Records Record the model number, serial number, and purchase date of your TV. The model and serial numbers are on the back of the TV. Refer to this page when requesting assistance with the TV. MODEL NUMBER SERIAL NUMBER PURCHASE DATE RETAILER NAME LOCATION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Contents Important Information About Your TV Installation Notes, Operating Notes, Cleaning Recommendations.. . . . . . . . . . . . . . . . . . Important Safety Instructions. . . . . . . . . . . . 1 Television Overview Package Contents. . . . . . . . Special Features of Your TV. TV Front Panel.. . . . . . . . . . TV Back Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important Information About Your TV Installation Notes Cleaning Recommendations Stand Requirement CAUTION: Use these Mitsubishi TV models only with the Mitsubishi stand models shown here. Other stands can result in instability and possibly cause injury. Normally, light dusting with a dry, non-scratching duster will keep your TV clean. If cleaning beyond this is needed, please use the following guidelines: First, turn off the TV and unplug the power cord from the power outlet.
Important Safety Instructions Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
1 Television Overview Package Contents Integrated HDTV Tuner Your widescreen Mitsubishi HDTV has an internal HDTV tuner able to receive both over-the-air HDTV broadcasts (received via an antenna) and non-scrambled digital cable broadcasts, including non-scrambled HDTV cable programming. Please take a moment to review the following list of items to ensure that you have received everything. 1. 2. 3. 4. 5. 6. 7.
1. Television Overview NetCommand with IR Learning Front Inputs 736 or 835 Series TV. Your Mitsubishi HDTV offers a new level of networking that seamlessly integrates selected older A/V products with new and future digital products. NetCommand® supports IR (infrared) control of products such as VCRs, DVD players, cable boxes, and satellite receivers. NetCommand can “learn” remote control signals directly from many devices, allowing you to create a customized NetCommandcontrolled home-theater system.
1. Television Overview Front-Panel Indicators Off Steady On Slow Blinking Fast Blinking POWER/TIMER Indicator LED Color TV Condition Additional Information None TV is powered off. Normal operation. Green TV is powered on. Normal operation. Green TV powered off, auto-on timer is set. Normal operation. TV can be turned on at any time. Green • • TV just plugged into AC outlet. Wait approximately two minutes for blinking to stop before AC just restored after power failure. turning on.
1.
1. Television Overview TV Back Panel, continued 7. HDMI™ Inputs (High-Definition Multimedia Interface) The HDMI inputs support uncompressed standard and high-definition digital video formats and PCM digital stereo audio. Use the HDMI inputs to connect to CEA-861 HDMI compliant devices such as a high-definition receiver or DVD player. These inputs support 480i, 480p, 720p, 1080i, and 1080p video formats.
2 11 TV Set-Up Guidelines for Setting Up and Using Your New Widescreen TV Getting Started 1. Review the important safety, installation, and operating information at the beginning of this book. 2. Choose a location for your TV. • Allow at least four inches of space on all sides of the TV to help prevent overheating. Overheating may cause premature failure of the TV as well as shortened lamp life. • Avoid locations where light may reflect off the screen.
2. TV Setup Guidelines for Setting Up and Using Your New Widescreen TV, continued 736 or 835 Series TV: See chapter 6, “NetCommand IR Control,” to perform NetCommand IR “learning” to set up control of your home theater. 7. Mitsubishi recommends you perform a channel scan for channels received on ANT 1 and ANT 2. See “Initial TV Setup” page 13. 8. You can now start watching TV or you can perform additional setup and customization through the TV menus. • Additional TV Setup 1.
2. TV Setup Initial TV Setup Use the Setup menu for basic TV setup options. 1. Press MENU to open the Main menu. 2. Press to highlight the Setup icon and display the Setup menu. • • 13 Select a lamp brightness mode (page 47) Enable 3D video (pages 35 and 47) Setting Up TV Inputs Memorizing Channels For ANT 1 and ANT 2 To start channel memorization 1. With the Setup menu displayed, press light the Scan icon.
2. TV Setup Setting Up TV Inputs, continued Auto Input/Auto Output Sensing Screens See below for how different connections are handled by Auto Input/Auto Output Sensing. • Most Device Types. Select the device type from the on-screen list. The device type you select here will appear as an icon in the Input Selection menu. Press to move through the device list to highlight the device type connected to the input.
2. TV Setup Controlling A/V Receiver Sound Volume Use one of the methods below to control sound volume from an A/V receiver. With a Standard TV Setup • • • Recommended Method: Program the TV’s remote control for your A/V receiver and enable the Audio Lock feature. See page 68. Program the TV’s remote control for your A/V receiver and set the TV remote’s slide switch to the AUDIO position to control A/V receiver volume. Set the switch back to the TV position to control the TV.
2. TV Setup About Home-Theater Control Systems This summary offers some examples of the control methods available using the TV’s remote control. You may wish to use one or more of these methods in your home theater after completing Auto Input Sensing. Source device connected directly to the TV Remote Control Programming with Any Connection Type Program the remote control to operate the A/V device. To control the device, set the slide switch to the correct position for the device type.
DVI/PC INPUT L R AUDIO 17 2. TV Setup Using the TV with a Personal Computer Connecting a Computer to the TV 3D GLASSES EMITTER DVI/PC INPUT L R AUDIO Digital DVI DVI-to-HDMI cable or an HDMI cable with an HDMI-toDVI adapter HDMI HDMI-to-HDMI cable No additional audio connection is required. IMPORTANT This TV accepts digital computer signals only. R AUDIO L ANT 1 Y/ VIDEO DIGITAL AUDIO OUTPUT R AUDIO L Pb 2. 3. 4. 5. 6.
2. TV Setup Using the TV with a Personal Computer Computer Video Adjustments 1. Power on the computer if it is not already on. 2. Select PC from the Input Selection menu. To do 3. 4. Tip: Set the computer’s screen saver to display a pattern after several minutes of inactivity. This acts as a reminder that the TV is powered on and the lamp is in use. The lamp is in use whenever the TV is powered on, even if the screen appears dark.
3 TV Connections 19 Before You Begin Auto Input Sensing Surround Sound The TV’s Auto Input Sensing feature automatically recognizes most connections and prompts you to identify the type of device connected. See chapter 2, “TV Setup,” for more on Auto Input Sensing. For best surround sound audio quality, route audiosignal cables or HDMI cables from the source device directly to your A/V receiver or sound system.
3. TV Connections HDMI Device (Cable Box, Satellite Receiver, DVD Player, or Other Device) Required: HDMI-to-HDMI cable. Connect an HDMI cable from the TV back panel to the HDMI device output. HDMI devices provide video and audio through the single cable. Mitsubishi recommends you use category 2 (highspeed) HDMI cables to connect HDMI 1.3 source devices. High-speed category 2 cables bring you the full benefits of Deep Color and x.v.Color.
F Required: UHF/VHF combiner 1. Connect the primary incoming coaxial lead cable to 1. Connect the UHF and VHF antenna leads to the ANT 1 on the TV back panel. 2. For an optional secondary antenna source, connect an antenna (or cable) to ANT 2.
3. TV Connections Standard Cable Box, Satellite Receiver, or Other Device with S-Video Required: S-Video cable and left/right analog stereo audio cables. 1. Connect the cable from the outside cable or satel2. 3. lite service to CABLE IN or SATELLITE IN on the cable box or satellite receiver. Connect an S-Video cable from S-VIDEO OUT on the cable box or satellite receiver back panel to INPUT 3 S-VIDEO on the TV back panel.
3. TV Connections VCR to a Cable Box (Audio & Video) 6. Connect either an S-Video or composite video Required: Two-way RF splitter, three coaxial cables, right and left audio cables, S-Video or composite video cable, plus video and audio cables required to connect the TV to the cable box. 1. Connect the incoming cable to IN on the RF splitter. 2. Connect one coaxial cable from OUT on the RF splitter to CABLE IN on the cable box.
3. TV Connections A/V Receiver (Sound System) Using the TV’s Audio Output Most setups require either a digital audio cable or analog stereo audio cables. To send audio from TV channels received on ANT 1, ANT 2, or devices connected directly to the TV, you must use one of the connections shown below. The TV makes all audio available in digital and analog formats: • Analog audio coming into the TV is available as output in digital stereo format on the DIGITAL AUDIO OUTPUT jack.
MF 25 3. TV Connections Camcorder Inputs on the front of the TV (INPUT 4) offer the most convenient way to connect a camcorder, although you can use jacks located on the back panel instead. Three different connection options are described on this page. Use jacks on the TV front panel to connect a camcorder B: Composite Video Connection Required: Composite video and analog stereo audio cables supplied with the camcorder. 1.
4 TV Operation and Features Choosing a Viewing Source Sleep Timer The Sleep Timer turns the TV off after the length of time you set. To set the TV to turn on at a certain time, see the Setup > Timer menu on page 46. Input Selection menu Choose a viewing source from the Input Selection menu. The current TV input appears as a full-color icon in this menu. 1. Press INPUT to display the Input Selection menu. If there are only two inputs to the TV, INPUT switches between them without displaying the menu.
4. TV Operation and Features Remote Control 1. POWER: Turns TV power on and off. 2. Slide Switch: Selects the A/V device to be operated by the remote control. Set the slide switch to TV for operation of the TV, and NetCommandcontrolled devices. Control of additional devices requires programing (see Appendix C, “Programming the Remote Control.” 2 3. SLEEP: Sets the TV to turn off within 2 hours in increments of 30 minutes. 4 4.
4. TV Operation and Features Remote Control, continued 21. MENU: Displays the main TV menu. When a submenu is open, backs up one menu level. 22. EXIT: Closes TV on-screen menus/displays. 23. F1–F4 For devices under NetCommand control: Perform NetCommand “Learning” to assign your choice of functions to the F1–F4 keys. For devices operating independently of NetCommand: The F1–F4 keys work like the A, B, C, D buttons on some cable boxes, satellite receivers, and DVD players.
4. TV Operation and Features ChannelView Channel Listings ChannelView screen ChannelView™ shows memorized channels on ANT 1 or ANT 2. It displays channel names and program information as sent by broadcasters or your local cable service provider and may be incomplete. No program information is displayed for analog channels. An analog channel name is displayed only if you assigned a name in the Setup > Edit menu (page 44).
4. TV Operation and Features Status Display Press the INFO key to see the on-screen status display. The most common displays are shown here. You will rarely, if ever, see all status indicators at the same time. On-screen status display sample information Ant 1 1 2 3 7-1 KABC-HD 4 Monday Night Football 10 HD 16:9 Standard TV-PG 9 Stereo 11 6 7 Fav1 English 12 13 Tuesday 9:10 PM Sleep 30 min 5 15 MUTE St. Louis vs. Tampa Bay 8 8 14 Signal Strength 16 Analog Sources Digital Sources 1.
4. TV Operation and Features Fav (Favorite Channels) Use the six Fav channel banks to store groups of your favorite channels from ANT 1 and ANT 2. You can set up a Fav channel bank for each of your favorite program types or set up a bank for each TV user. You may prefer to perform Fav channel setup from a menu. See the Setup > Edit options, page 44.
4. TV Operation and Features TV Signals and Display Formats This is a 16:9 widescreen TV suitable for images available from HDTV and many DVDs. You can view olderstyle squarish images (4:3 aspect ratio) using one of the display formats described on this page. Press the FORMAT key to cycle through the available display formats. The TV remembers the format you last used for each input. DVD Image Definitions Image information may be stated on the DVD case.
4. TV Operation and Features 33 Viewing Camera Files JPEG Photos and the USB Photo Port 1. Connect your USB USB card L-AUDIO-R Pb VIDEO/Y Pr reader or USB drive to the TV’s USB 0QUJPOBM BVEJP Photo port. EFWJDF The USB Photo menu displays while files are being read. Wait until you see the completion message on screen before continuing. I N P U T 4 Note: Some manufacturers’ devices may be incompatible with the TV.
4. TV Operation and Features Slide Show USB Photo Menu Compatible Picture Files Use these keys during the slide show: • Keys for JPEG Picture Slide Show Begin or resume slide show playback Pause or resume playback while in automatic advance mode. or ENTER FORMAT Advance to the next slide. Go to the previous slide. • Rotate the slide clockwise in 90˚ increments. • Stop slide show and display the USB Photo menu. INFO Display status for the viewing device and current image.
4. TV Operation and Features 3D Video This section provides Instructions for viewing 3D video using the TV’s 3D feature. The 3D options are found in the Setup > 3D menu described on page 47 . Initial Set-Up 1. Check if your HDMI 3D video source device outputs 2. a 1080p 60 Hz signal. This information will be needed when you assign an input name in the Auto Input Sensing screen. If your 3D glasses came with an emitter box, connect the emitter box to the 3D GLASSES EMITTER jack on the back of the TV.
5 TV Menus Main Menu Press MENU on the remote control to open the Main menu. Icon Menu Name and Description AV Menu Page Customize picture and sound settings. Turn closed captions on and off; customize Captions Menu caption displays. 37 42 Setup Menu Perform basic TV setup. Set language, scan (memorize) channels, set the TV clock, edit channel options, lock TV use by channel, set Energy Mode, Lamp Mode, auto-on TV Timer.
5. TV Menus 37 AV Menu An on-screen slider displays when making some audio and video adjustments. Numeric values represented on the slider range from 0 (minimum) to 63 (maximum), with 31 as the mid-point. The AV menu contains sub-menus for audio and video adjustments AV Menu Options Video See the description of video adjustments on page 39. Audio See the description of audio adjustments on page 41.
5. TV Menus AV Menu, continued AV > Global menu AV Menu Options Video Mute On, Off • Global • Audio Only Screensaver On, Off • • On: Displays a solid blue background when there is no video signal from the current input. Use the On setting to let the colored screen remind you that the TV is powered on at times when there is no picture. The TV will power off after five minutes if it detects no video signal. Off.
5. TV Menus 39 Video Menu Mitsubishi recommends you assign names to TV inputs before making video adjustments (use the Inputs > Name menu). Otherwise, adjustments will be reset to the defaults if you name inputs afterwards. To make video adjustments: • From the Video menu: 1. Press to highlight an option. 2. Press to display the submenu and adjust. 3. Press MENU to return to the AV menu. • While watching TV: Press the VIDEO key repeatedly to display the video option you want to change.
5. TV Menus Video Menu, continued SharpEdge (835 Series TVs) On, Off SharpEdge™ adds special edge enhancements to make the image appear sharper. Saved by input. Deep Field Imager (736 or 835 Series TVs) On DeepField™ Imager dynamically enhances black levels in portions of the screen to provide strong contrast with detail over mixed screen content. Off Contrast is adjusted uniformly across the entire screen.
5. TV Menus 41 Audio Menu To make audio adjustments: • From the Audio menu: 1. Press to highlight an option 2. Press to display the submenu and adjust. 3. Press MENU to return to the AV menu. • While watching TV: Press the AUDIO key repeatedly to display the audio option you want to change. to change settings. Press AV menu, Audio options Audio Menu Options Speakers The Speakers option displays only if an A/V receiver connection has been detected. TV Turns on the internal TV speakers.
5. TV Menus Captions Menu Captions on Digital Channels Captions on Analog Channels The TV can decode captions from ANT 1/ANT 2 and the VIDEO composite and S-VIDEO jacks. Broadcasters can send either standard closed captions or text service. Standard closed captions follow the dialogue of the program and display in a small section of the screen. Text-service closed captions often contain information such as weather or news and cover a large portion of the screen.
5. TV Menus 43 Setup Menu Use the Setup menu to: • Select English or Spanish for menus and on-screen text. • Scan the channels available for the antenna or cable service connected to the ANT 1 or ANT 2 jacks. • Edit channel options, including channel locking. • Set the TV’s internal clock. • Set the TV Timer to turn on the TV automatically at a designated time. • Set the energy mode for power consumption when the TV is powered off. • Set the TV Lamp Mode. • Turn 3D mode on and off.
5. TV Menus Setup Menu, continued Edit Virtual Channel Number (digital channels only). A channel number sent by a local broadcaster. Usually the virtual number is associated with the corresponding analog channel number. For example, a broadcaster may associate digital channel 2-1 with their analog channel 2. Physical Digital Channel Number. The channel number officially assigned to the actual broadcast frequency; shown on screen in parentheses.
5. TV Menus 45 Setup Menu, continued Clock Use either the manual or auto method to set the clock. Set the clock if you wish to: • Use the TV’s Timer function. • Maintain accurate ChannelView listings. Setup menu, Clock options Setup Menu Options Settings Clock Manual. To set the clock manually: 1. Select Manual. 2. Set the time of day. 3. Set the date. 4. Select your time zone. 5. Select either Applies or Ignore for Daylight Savings Time.
5. TV Menus Setup Menu, continued Timer Use the Timer to set a time for the TV to turn on automatically. Use this menu to set a day, time, input, and channel for the Timer. If the TV is already on at the requested time, the TV will automatically tune to the designated channel. • The TV clock must be set before you can use the Timer feature. • To open the Timer menu, highlight the Timer icon in the Setup menu and press ENTER.
5. TV Menus 47 Setup Menu, continued Setup menu, Energy options Setup Menu Options Energy Mode Energy Fast Power On Low Power Use the Energy Mode option to select the level of power consumption while the TV is turned off. The default setting is Fast Power On. Low Power uses less energy, but TV power-on takes longer and some TV features may be unavailable. Keep Energy Mode set to Fast Power On if you need to: • Have faster power on. • Receive updates to ChannelView channel listings.
5. TV Menus Inputs Menu Inputs Menu Options Name Cable Box, Camcorder, CD/Audio, DVD (DVD, DVD2, Blu-Ray), DVR, Game (Game, PS, Xbox, Wii), MP3 Player, PC, Satellite, VCR, AVR On/Off (Ant 1 and ANT 2 only) Delete (deactivated HDMI only) Control On, Control Off (CECenabled HDMI devices; operates only when Inputs > NetCommand HDMI Control is set to On) • • • • Lets you assign or change names of inputs appearing in the Input Selection menu. -- Press to move between inputs. -- Press to select a name.
5. TV Menus 49 Lock Menu TV locks available from the Lock menu are: Parent Other Time Control Panel Note: Lock by Ratings Restricts access to programming based on V-Chip rating signals sent by the broadcaster. Lock by Time Restricts TV use by time of day. Lock Control Panel Disables the buttons on the TV’s control panel. Use this option if small children in the home try to press control-panel buttons. Channel Lock is an additional lock that blocks access to specific channels.
5. TV Menus Lock Menu, continued Parent Menu Options (U.S.-based rating system) Option Name and Description Lock Off, On Disables or enables program blocking based on V-Chip signals and the U.S. rating system. TV Rating TV-Y Youth. For children under 7. TV-Y7 Youth 7 and older. TV-G General Audience. For the entire family. TV-PG Parental Guidance. Parental Guidance recommended; may not be suitable for some children. TV-14 Adolescent 14 and older. Not recommended for children under 14.
5. TV Menus 51 Lock Menu, continued Other Menu Options (alternate rating system) This TV can recognize new rating systems that may come into effect in the future. The Other option remains grayed out until the TV receives a signal using an alternate rating system. Such alternate rating systems will apply only to digital programming received on the ANT 1 and ANT 2 inputs.
6 NetCommand IR Control About NetCommand IR Control Note: • • • • • To learn about NetCommand for HDMI devices, available on all TV models, see Appendix E, “NetCommand HDMI Control of CEC Devices,” page 77. NetCommand IR home-theater control is available on the following models: -- WD-65736, WD-73736 -- WD-65835, WD-73835 NetCommand setup is optional. You may wish to use NetCommand IR control to supplement CEC control.
*O GSPOU TIBSFE CZ UXP 6. NetCommand IR Control (736 and 835 Series TVs) BWFSBHF TJ[FE EFWJDFT IR Emitter Placement 5. Secure the emitter ends in place using double6. sided tape. Place any unused ends behind the devices to prevent stray signals from reaching the IR sensors.
6. NetCommand IR Control (736 and 835 Series TVs) Initial NetCommand Setup for Most Devices To perform this procedure, you need: • The remote controls for both the TV and the device you want to control. • The IR emitter cable supplied with the TV. Note: 1. 2. 3. To set up an A/V receiver, see “Set Up NetCommand Control of an A/V Receiver” later in this chapter. Connect and position the IR emitters for the devices you wish to control. See “IR Emitter Placement” on the previous page.
6. NetCommand IR Control (736 and 835 Series TVs) NetCommand Specialized Device Keys Refer to this chart when “learning” device keys. “Learn” some, all, or none of the keys used for each device type. The chart has space for you to write in functions you assign to the F1–F4 keys. See the following page for more on keys marked in the “Special Operation Method” column.
6. NetCommand IR Control (736 and 835 Series TVs) Operating NetCommand-Controlled Devices Controlling Most Device Types Controlling an A/V Receiver As an example of NetCommand control, if you are watching your cable box and you wish to tune to the next channel higher, press CH/PAGE . NetCommand then sends the “learned” channel-up control signal to the cable box. 1. With an IR emitter properly positioned in front of the device, use the Inputs > Learn screen to perform NetCommand setup for the device.
6. NetCommand IR Control (736 and 835 Series TVs) 57 Operating NetCommand-Controlled Devices, continued Key Name in Learning Screen Special Operation Description and Setup How to Use Guide Displaying the Disc Menu (DVD or high-definition disc format) While watching the device, press GUIDE to display the disc menu. “Learn” the Disc Menu, Top Menu, or other key as named on the original remote in the Guide learning position. Displaying the On-Screen Program Guide (cable box or satellite receiver) 1.
6. NetCommand IR Control (736 and 835 Series TVs) Setting Up NetCommand Control of an A/V Receiver Several types of A/V receiver control are described here using the Inputs > AV Receiver menu. • Controlling power and volume is described on this page. • For most equipment setups, see “A/V Receiver Control: Automatic Audio Switching” on the opposite page.
6. NetCommand IR Control (736 and 835 Series TVs) Setting Up NetCommand Control of an A/V Receiver, continued A/V Receiver Control: Automatic Audio Switching Perform one of these setups to enable the A/V receiver to switch automatically to the correct audio input when you select a device in the TV’s Input Selection menu. To set up control of an A/V receiver you need: • The remote controls for both the TV and the A/V receiver. • The IR emitter cable supplied with the TV.
6. NetCommand IR Control (736 and 835 Series TVs) Setting Up NetCommand Control of an A/V Receiver, continued Before You Begin 1. Connect your A/V devices to the TV and connect your A/V receiver to the audio outputs on the TV and the DVD player. See chapter 3, “TV Connections,” for suggestions. Important: To use Setup 1, you must connect the A/V receiver to the TV’s audio output; i.e., the TV’s AVR AUDIO OUTPUT or DIGITAL AUDIO OUTPUT jack. 2.
6. NetCommand IR Control (736 and 835 Series TVs) 61 Setting Up NetCommand Control of an A/V Receiver, continued A/V Receiver Control: Automatic Audio and Video Switching via HDMI EJHJUBM TVSSPVOE TPVOE Audio Switching Setup 2: Automatic A/V Receiver Switching to a Surround Sound Device %7% 1MBZFS XJUI %JHJUBM 4VSSPVOE 4PVOE Use this setup to send digital surround sound directly from a device to an A/V receiver. 1. Under Learn, highlight Input2.
6. NetCommand IR Control (736 and 835 Series TVs) Setting Up NetCommand Control of an A/V Receiver, continued 3D GLASSES EMITTER Setup to Control A/V Receiver Power and Volume L Perform the steps under “A/V Receiver Control: Power and Volume,” page 58.
6. NetCommand IR Control (736 and 835 Series TVs) Setting Up NetCommand Control of an A/V Receiver, continued 8. 3. Press ENTER and the highlighted Input label will start 4. 5. flashing to indicate readiness for “learning.” While the Input text is flashing, press and hold the key on the A/V receiver’s remote control for the input you wish to associate with the selected Input label. When a check appears next to the Input label, release the remote control key.
Appendices Appendix A: Specifications Size, Weight, and Power Consumption Dimensions (inches) Height Width Depth Weight (lbs.) Power (watts) WD-60C8, WD-60735 36.7 53.8 14.4 68.3 265 WD-65C8 WD-65735 39.5 58.2 15.4 75.4 265 WD-73C8, WD-73735 43.6 65.2 17.5 95 265 Model WD-65736 39.5 58.2 15.4 75.4 270 WD-73736 43.6 65.2 17.5 95 270 WD-65835 39.5 58.2 15.4 78 270 WD-73835 43.6 65.2 17.5 98 270 Component Video (Y/Pr/Pb) up to 3 CEA-770.1 & CEA 770.
Appendices Appendix B: Bypassing the Parental Lock 65 Bypassing the Parental Lock Lock Bypass Instructions Have Been Filed for Future Reference After you set the lock, you must use your pass code to view a locked program, view the locked TV, view a locked channel, cancel the lock, or enter the Lock menus. IMPORTANT Cut along the dotted line and file bypass instructions in a safe place for future reference. If you forget your pass code, you can view the locked TV without entering your pass code.
Appendices This page intentionally left blank
Appendices Appendix C: Programming the Remote Control This appendix explains programming the TV’s remote control to operate other A/V devices. This is distinct from NetCommand control. The TV’s remote control can operate other devices by three different methods: VCRs and DVRs CH / POWER SLEEP (FAST Forward) (Pause) (Play) • Remote Control Programming: You must move the slide switch to the position specific to the type of device. • • • • • • • 736 or 835 Series TV.
Appendices Appendix C: Programming the Remote Control, continued Programming the Remote Control 6. Once you have found the correct code, write it in the space below for future reference. 1. Move the slide switch at the top of the remote to the position for the product you want to control. Refer to the table below. Only one of each device type can be controlled in each slide-switch position.
Appendices Appendix C: Programming the Remote Control, continued Programming Codes Audio Amplifiers Make Acurus Adcom Altec Lansing Aragon Bel Canto Design Bose Carver Cary Audio Design Classe Curtis Mathes Durabrand Flextronics GE Halcro Harman/Kardon JVC Klipsch Krell Left Coast Lenoxx Lexicon Marantz Mark Levinson McIntosh Modulaire Mondial Optimus Code 30765 31100, 30577 31742 30765 31583 30674 30892 31879 Parasound Philips Pioneer Polk Audio Primare RadioShack RCA Realistic Soundesign Technic
Appendices Appendix C: Programming the Remote Control, continued Programming Codes, continued CD Players Make Grundig Hafler Harman/Kardon Hitachi Inkel Integra Jerrold JVC Kenwood KLH Koss Krell LG Linn LXI Magnavox Marantz Mark Levinson Matsui McIntosh MCS Memorex MGA Micromega Miro Mission Mitsubishi Modulaire MTC Myryad NAD NSM Onkyo Optimus Panasonic Parasound Penney Philips Pioneer Polk Audio Primare Proceed Proton QED Quad Quasar RadioShack Code 30157 30173 31202, 30173, 30157, 30100, 30083
Appendices Appendix C: Programming the Remote Control, continued Programming Codes, continued A/V Receivers Make Code Koss Linn Liquid Video Magnavox Marantz McIntosh Micromega Mitsubishi Myryad Nakamichi Onkyo Optimus Oritron Outlaw Panasonic Philips Pioneer Polk Audio Proceed RadioShack RCA Realistic Revox Rio Samsung Sangean Sansui Sanyo Sharp Sharper Image Sherwood Sirius Sonic Blue Sony Soundesign Stereophonics Sunfire Sylvania 31497, 31366 30189 31497 31514, 31269, 31266, 31189, 30531, 30189 3
Appendices Appendix C: Programming the Remote Control, continued Programming Codes, continued VCRs Make CCE Cineral Citizen Classic Colortyme Colt Craig Criterion Crosley Crown Curtis Mathes Cybernex CyberPower Daewoo Daytron Dell Denon Derwent DirecTV Dual Durabrand Dynatech Electrohome Electrophonic Emerald Emerex Emerson Fisher Fuji Fujitsu Funai Garrard Gateway GE Gemini Genexxa Go Video GoldStar Goodmans Gradiente Granada Grundig Harley Davidson Harman/Kardon Code 20072, 20278 20278 20479, 202
Appendices Appendix C: Programming the Remote Control, continued Programming Codes, continued VCRs Make Pulser Quarter Quartz Quasar RadioShack Radix Randex RCA Realistic ReplayTV Ricavision Runco Salora Samsung Samtron Sanky Sansui Sanyo Scott Sears Sharp Shintom Shogun Siemens Signature Singer Sonic Blue Sonographe Sony Soundmaster Stack 9 STS SV2000 Code 20240 20046 20047, 20046, 20035 21162, 20162, 20035, 20002 21162, 21037, 20240, 20162, 20104, 20048, 20047, 20046, 20037, 20035, 20000 20037
Appendices Appendix C: Programming the Remote Control, continued Programming Codes, continued DVD Players Make Disney DiViDo Dual Durabrand DVD2000 Electrohome Emerson Enterprise Entivo Enzer ESA Firstline Fisher Funai Gateway GE Go Video Go Vision GoldStar Goodmans GPX Gradiente Greenhill Grundig Harman/Kardon Hello Kitty Hitachi Hiteker iLo Initial Insignia Integra IRT Jaton JBL JMB JSI JVC jWin Kawasaki Kenwood KLH Kloss Konka Koss Lasonic Lecson Lenoxx LG LiteOn Loewe Logix Magnasonic Code 21270
Appendices Appendix D: Lamp-Cartridge Replacement and Cleaning WARNING CAUTION BURN DANGER! HOT SURFACES INSIDE! Touch lamp cartridge handle only. Do not touch lamp or lamp cartridge housing. Keep lamp cartridge horizontal during removal. Do not tilt as glass may come out and cause injury. Replace lamp cartridge only with the same part number 915B403001. THE ACCESS PANEL IS PROVIDED WITH AN INTERLOCK TO REDUCE THE RISK OF EXCESSIVE ULTRAVIOLET RADIATION.
Appendices Appendix D: Lamp-Cartridge Replacement and Cleaning, continued Lamp-Cartridge Replacement Removing the Old Lamp Cartridge 1. Turn off TV power and allow the lamp to cool for at 2. 3. 4. 5. 6. least one hour before proceeding. After the lamp has cooled, remove the cover of the lamp compartment, located on the back of the TV. Refer to figures 1 and 2. Use a #2 (large) Phillips screwdriver to loosen the screw securing the cover.
Appendices 77 Appendix E: NetCommand HDMI Control of CEC Devices Many new HDMI devices have a feature called CEC (Consumer Electronics Control) or HDMI Control. Mitsubishi calls this feature NetCommand HDMI Control or NetCommand for HDMI. HDMI CEC allows one device, such as the TV, to control other devices, such as an A/V receiver or disc player. CEC use is optional.
Appendices Note: Figure 4 (NetCommand HDMI Control is off). The TV’s NetCommand for HDMI Control is turned off. Action: Follow the instructions in “Enabling or Disabling the TV’s NetCommand HDMI Control” on the previous page. 3D GLASSES EMITTER DIGITAL AUDIO OUTPUT DVI/PC INPUT L R AUDIO R AUDIO L ANT 2 / AUX ANT 1 / MAIN You may not see the screen in figure 2 if the HDMI device has previously been detected by the TV. To check if CEC is enabled for the device, open the Inputs > Name menu.
Appendices Resolving CEC Conflicts, Changing HDMI Connections, Removing HDMI Devices Because each manufacturer selects which CEC functions to support, some devices can conflict with other devices. If control conflicts arise, you can: • Turn off CEC in the other device’s setup menu. • Turn off TV control of an individual CEC device (see fiugre 5 below). • Reset TV control of an individual CEC device (see figure 6 below). Figure 6. Inputs > Name menu with AVR DVD deleted.
Appendices Appendix F: Troubleshooting TV Reset Comparison Guide You can resolve many common TV problems using the reset functions described in the following table. See also the troubleshooting suggestions later in this appendix. IMPORTANT Before you change sound or picture settings: If picture or sound settings seem wrong for a broadcast channel (a channel from ANT 1, ANT 2, a cable box, or satellite receiver), first check other channels from the same input before changing settings.
Appendices 81 Appendix F: Troubleshooting, continued Reset Name When to Use How to Use Resulting Action System Reset If the TV does not turn on or off, does not respond to the remote control or control-panel buttons, or has audio but no video. Press the SYSTEM RESET button on the control panel. The TV will turn off and the green LED will flash quickly for about one minute. When the green LED stops flashing, you may turn on the TV.
Appendices Appendix F: Troubleshooting, continued General TV Operation Symptom Remarks 1. A fan is running even while the TV is powered The room is too warm. When the TV is off, internal components off. continue to draw power and must be cooled by the fan. 2. The fan gets louder after the TV is shut off. Normal operation. The fan speeds up to cool the lamp quickly after the TV has been shut off. 3. The TV remote control does not work. • • • • • • 4.
Appendices 83 Appendix F: Troubleshooting, continued TV Channels Symptom Remarks 1. The TV takes several seconds to respond to channel changes. • • • • It is normal for digital channels to take longer to tune in. Press ENTER after a entering channel number to avoid delays. Use a 4-digit number for an over-the-air digital channel. Use a 6-digit number for digital cable channels if your cable service is able to recognize 6-digit channel numbers. 2. You cannot access a channel.
Appendices Appendix F: Troubleshooting, continued Picture Symptom Remarks 1. Picture does not look like a high-definition picture. Not all signals are high-definition signals. To receive high-definition programming from your cable or satellite provider, you must subscribe to the provider’s high-definition service. Some overthe-air broadcasts are in high-definition and can be received with a high-quality antenna suited to your location. 2. Picture has become dimmer.
Appendices 85 Appendix F: Troubleshooting, continued Sound (see also NetCommand troubleshooting for additional help with A/V receiver concerns) 1. Symptom Remarks There is no sound even when the volume is turned up. • • • • • Check if the MUTE button is on. The TV’s “Listen to:” setting may be set to SAP. Check that the Speakers option is set to TV to hear sound from the TV speakers.
Appendices Appendix F: Troubleshooting, continued NetCommand IR Control Symptom Remarks 1. • Cannot see the menu from the A/V Receiver. • • 2. NetCommand unable to learn specific device keys. • • • • • 3. The A/V receiver is the selected audio source • but there is no sound. • 4. There is no sound from the A/V receiver for my DVD player or other surround sound device even though I learned the IR code for the A/V receiver’s DVD input or other input.
Appendices 87 Appendix F: Troubleshooting, continued NetCommand IR Control Symptom Remarks 5. There is no sound or picture from the A/V receiver for my DVD player or other device connected to the A/V receiver; the A/V receiver should be sending video to the TV over an HDMI cable. (A/V Receiver Set Up for Audio and Video Switching over HDMI) NetCommand A/V receiver setup is not switching audio and video inputs properly. See “Setup to Control Automatic Audio and Video Switching via HDMI,” page 62. 6.
Trademark and License Information Trademark and License Information LICENSOR’S SUPPLIERS DO NOT MAKE OR PASS ON TO END USER OR ANY OTHER THIRD PARTY, ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY OR REPRESENTATION ON BEHALF OF SUCH SUPPLIERS, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Digital Light Processing® and DLP® are registered trademarks of Texas Instruments. FlashFX ProT is a trademark of Datalight, Inc.
Trademark and License Information 89 Mitsubishi TV Software END-USER LICENSE AGREEMENT FOR EMBEDDED SOFTWARE IMPORTANT – READ CAREFULLY: This License Agreement is a legal agreement between you (either an individual or an entity) and Mitsubishi Digital Electronics America, Inc. (MDEA) for all software pre installed and/or provided along with this television (“Software”). By utilizing this television and Software, you agree to be bound by the terms of this License Agreement.
Warranty Mitsubishi DLP Projection Television Limited Warranty MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants as follows to the original purchaser of this television from an authorized MITSUBISHI Audio/Video Dealer, should it prove defective by reason of against defects arising from improper workmanship and/or material: a. Parts. The lenticular (i.e.
Warranty 91 c. Proof of purchase date from an authorized MITSUBISHI dealer is required when requesting warranty service. Present your sales receipt or other document which establishes proof and date of purchase. THE RETURN OF THE OWNER REGISTRATION CARD IS NOT A CONDITION OF COVERAGE UNDER THIS LIMITED WARRANTY. However, please return the Owner Registration Card so that we can contact you should a question of safety arise which could affect you. d.
Index Index A Adjust Keys (Up/Down/Left/Right) 27, 36 Anamorphic Picture Format 32 Antenna Connecting 21 Signal Strength for Digital Channels 30 Antenna Inputs (ANT 1, ANT 2) 9 Audio Lock (A/V receiver control) 68 Audio Output Jacks 9 Auto Input Sensing 13 Auto-Off (Sleep Timer) 26 Auto-On (Timer) 46 A/V Memory Reset 80 A/V Receiver and TV Speakers 41 and TV’s Remote Control 58, 62, 67 Audio Lock 68 Connecting 9, 24 Controlling Sound Volume 15 Disconnecting Analog 14 NetCommand IR Control 52, 56, 58 C
Index Level Sound 41 Light, Decorative 38 Listen To 41 Listings 29 Lock Menu.
Website: www.mitsubishi-tv.com E-mail: MDEAservice@mdea.com For questions, call Consumer Relations at 800-332-2119 To order replacement or additional remote controls, lamp cartridges, or Owner’s Guides Visit our website www.mitsuparts.com or call 800-553-7278 SYSTEM RESET If the TV does not respond to the remote control, control-panel buttons, or will not power on/off, press the SYSTEM RESET button on the control panel. The green LED will flash quickly for about one minute.