Owner’s Guide Projection Television Models WD-52327, WD-62327 visit our website at www.mitsubishi-tv.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be sufficient magnitude to constitute a risk of electric shock.
Contents Chapter 1 Television Overview TV Accessories............................................................................................................. 8 Special Features........................................................................................................... 8 Front Control Panel .......................................................................................................9 Back Panel Input/Output.......................................................................
IMPORTANT SAFEGUARDS Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain the safety and operating instructions for future reference. Follow all operating and use instructions. 2. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions. 3.
IMPORTANT SAFEGUARDS, continued power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 13. Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 14.
Thank You for Your Purchase Welcome to the wonderful and exciting world of digital television! We are honored that you chose Mitsubishi as your premier home entertainment partner. The development team at Mitsubishi Digital Electronics America (MDEA) understands that our customers demand and expect the very best. MDEA was founded on the core beliefs and philosophies that drive us to deliver products that implement the latest in advanced television technology.
Chapter Television Overview TV Accessories ........................................................................... 8 Special Features ......................................................................... 8 Front Control Panel..................................................................... 9 Back Panel Input/Output .........................................................
TV Accessories Special Features Please take a moment to review the following list of items to ensure that you have received everything including: Your new High Definition (HD) upgradeable widescreen television has many special features that make it the perfect addition to your home entertainment system.
Front Control Panel The buttons on the Front Control Panel highlighted in gray are duplicated on the remote control. The top row of labels show the control functions when there are no TV menus displayed on the screen. The bottom row of labels show the control functions when the TV menus are displayed on the screen or when a special function has been activated. See Remote Control Overview, for further details on the functions of these buttons.
Back Panel Input/Output 2 3 MONITOR OUT INPUT 2 1 4 Back Panel 5 COMPONE NT 4 80 i / 480P/ 1080i 1 Y S-VIDEO 2 6 DTV(Y PbPr/ GBRH V ) 480 i / 480P /1080 i MONITORLINK /DVI TM H Pb V V I D EO Pr AUDIOLEFT / AUDIO - AUDIO R IG HT R I GH T 1 AN T - A LOO P OU T AUDIOLEFT/ (MONO) AUDIORIGHT DVI AUDIO L E FT / ( MONO ) (MONO) AN T- B 1. ANT-A, LOOP OUT and ANT-B ANT-A and ANT-B receive signals from VHF/UHF antennas or a cable system.
Chapter 2 Connecting Antenna.......................................................................................... 12 Wall Outlet Cable .......................................................................... 12 Antenna to a Cable Box................................................................ 13 Antenna to a VCR .......................................................................... 13 Antenna to a Cable Box and VCR................................................
Connecting an Antenna or Wall Outlet Cable Separate UHF and VHF Antennas (Figure 1) 1. Connect the UHF and VHF antenna leads to the UHF/VHF combiner. 2. Push the combiner onto ANT-A on the TV back panel. UHF/VHF combiners are not provided with the TV. They are available at most electronic stores. Note: This TV will only be able to provide an analog signal through ANT-A on the TV back panel. See page 5 for Outdoor Antenna Grounding information.
Connecting an Antenna to a Cable Box or VCR Antenna to a VCR Antenna to a Cable Box (Figure 3) 1. Connect the incoming cable to ANT-A on the TV back panel. (Figure 4) 1. Connect the incoming cable to ANT-A on the TV back panel. Connect two coaxial cables as follows: 2. One from LOOP-OUT on the TV back panel to IN on the cable box back panel. Connect two coaxial cables as follows: 2. One from LOOP-OUT on the TV back panel to ANTENNA IN on the VCR back panel. 3.
Connecting an Antenna to a Cable Box and VCR, Connecting Composite Video or S-Video with Audio Contact your local cable or satellite provider or refer to the cable box or satellite Owner’s Guide for instructions on optimal connections to this TV. Composite Video or S-Video (Recommended) with Audio Antenna to Cable Box and VCR 1. Connect a video or an S-Video cable from VIDEO OUT on the VCR back panel to VIDEO or S-VIDEO, INPUT-1 or INPUT-2 on the TV back panel. (Figure 5) 1.
Connecting a Stereo Audio System Conecting an Audio Receiver Stereo Audio System (Recommended for shelf units or A/V receivers without digital audio inputs) (Figure 7) 1. Connect the audio cables from AUDIO MONITOR OUTPUT on the TV back panel to TV IN or AUX IN terminals on the back of the audio system. • The red cable connects to the R (right) channel • The white cable connects to the L (left) channel 2. Use the AUDIO/VIDEO SETTINGS menu (page 50) to turn off the TV’s speakers. 3.
Connecting a DVD Player or Other S-Video Device DVD Player with Component Video (Recommended) (Figure 9) 1. Connect the Component Video cables from (YCb Cr or Y Pb Pr) VIDEO OUT on the back of the DVD player to COMPONENT (1 or 2) on the TV back panel. The correct connections are: A. Y to Y B. Cb or Pb to Pb Other S-Video Device (Figure 10) 1. Connect an S-Video cable from VIDEO OUT on the device back panel to VIDEO INPUT-1 or INPUT-2 on the TV back panel. 2.
Connecting a DTV Receiver Contact your local cable or satellite provider or refer to the cable box or satellite Owner’s Guide for instructions on optimal connections to this TV. DTV Connectors and Adaptors (Figure 11) The TV back panel has 5 RCA-type connectors for the DTV connection. The back panel of your DTV receiver may use RCA-type connectors or BNC-type connectors.
Connecting a DTV Receiver, continued DTV Receiver with RGB Video Connections TV Back Panel (section detail) COMPONENT 4 80 i / 4 80P/ 1080i Y (Figure 13) 1. Pb 3.
Connecting MonitorLink™/DVI MonitorLink/DVI TV back panel (section detail) (Figure 14) COMPONE NT 480 i / 480P/ 1080i 1 2. Connect the L (left) and R (right) audio cables from the HDTV receiver to AUDIO LEFT and AUDIO RIGHT on the MonitorLink section of the TV back panel.
How Connections Affect the PIP (Picture-In-Picture) and POP (Picture-Outside-Picture) To see a picture in the PIP or POP, you may need to select an input source. If the only input connected is ANT-A, then both the main picture and the PIP/POP will be from that input source. If other video equipment is connected, you may be able to view these input sources as the PIP/POP.
Chapter 3 Remote Control Functions Overview of the TV Layer Buttons .............................................. 22 Care and Operation ...................................................................... 23 Channel Selection......................................................................... 24 Sleep Timer ................................................................................... 24 Use With Other A/V Products...................................................... 25 Special Functions ...
Remote Control Functions: Overview of the TV Layer Buttons Overview 20. PIP CH: Scroll up or down through memorized channels in PIP or POP. (Figure 1, following page,) 1. Slide Switch: Select A/V product to be controlled by the remote control. 2. Numbers: Individually select channels or input information into TV. 3. POWER: Turns power on and off for TV and other connected A/V products. 4. SQV (SuperQuickView™): Scan through a memorized list of favorite channels. 5.
Remote Control Functions: Care and Operation Operation Installing the Batteries: (Figure 2) CABLE/DBS/DTV TV 1. To remove the back battery cover, gently press the ridged tab in the direction of the arrow and slide the cover off. 2. Load the batteries, making sure the polarities (+) and (-) are correct. For ease of installation, install the negative (-) side first. 3 4 5 6 7 8 9 4 0 QV SQV Do not press two or more buttons at the same time unless instructed to.
Remote Control Functions: Channel Selection, Sleep Timer Channel Selection • CABLE/DBS/DTV TV VCR Enter three numbers (for channel 2, press 002). or DVD AUDIO 1 2 3 4 5 6 7 8 9 SQV 0 QV • POWER or • SLEEP Press the channel number and ENTER (for channel 2, press 2, then ENTER). Enter the channel number and wait four seconds (without pressing ENTER). The TV will change automatically. Note: Use the CANCEL button for digital subchannel (-) selection in the CABLE/DBS/DTV layer. Figure 3.
Use of the Remote Control with Other A/V Products Programming the Remote Control to Use with Other Brands of Audio and Video Products: (Figures 1-4 this page, Figure 5, following page) 1. Move the slide switch at the top of the remote to the product you want to control. 2. Press and hold the POWER button on the remote control. 3. Enter the first three digit code listed for your equipment, and then release the POWER button on the remote control. 4.
Use of the Remote Control with Other A/V Products, continued CABLE/DBS/DTV VCR DVD AUDIO TV 1. 3. Audio brand 2.
Remote Control Functions: Special Functions When your remote control has been programmed to operate another manufacturer’s product, the function performed on each layer may vary.
Remote Control Operation of PIP and POP Picture-In-Picture (PIP) and Picture-Outside- Picture (POP) features allow you to view programming in different ways. While watching the main screen, you can display programs from other channels and other inputs. To see which inputs can and cannot be used together, see How Connections Affect the PIP and POP, page 20. You can display large and small PIPs, side-by-side pictures, three POPs, or nine POPs.
Chapter 4 Menu Screen Operations The ViewPoint® Menu System .................................................... 30 MAIN Menu .................................................................................. 31 SETUP Menu.................................................................................. 33 CAPTIONS Menu ........................................................................... 37 CHANNEL EDIT Menu................................................................... 39 V-CHIP LOCK Menu ....
The Menu System Mitsubishi’s exclusive on-screen operating system provides on-screen information for menu choices and changes. A picture (icon) will be highlighted and can be selected using the remote control’s ADJUST arrows. When selected, the appropiate menu will appear or start an automatic function. You may then make changes within the menu or access available submenus. A highlighted square button indicates that you may make changes to the menu screen.
Main Menu Screens: Overview SETUP Menu CAPTIONS Menu (Figure 3) Basic (initial) setup instructions and functions are available through the SETUP submenu screens. Use this menu when you relocate the TV, experience a power loss or when devices are added after initial setup. • Memorize channels • Assign Input Assignments • Set the time and day • Select English or Spanish for the menus or screen display • Set the Energy Mode (Figure 4) Display broadcast captions or text on the screen.
Main Menu Screens: Overview, continued V-CHIP LOCK Menu AUDIO/VIDEO SETTINGS Menu (Figure 6) Lock the TV by selecting times, setting the Front Button Lock or choosing programs to block based on rating signals sent by your local broadcasting system. See pages 42-45 for detailed setup information. See page 42 for V-Chip rating information. (Figure 8) Adjust some or all of the A/V settings. Each input can be set to your preferences.
SETUP Menu: Memorize Channels, Memorize Menu, Input Assignment INPUT ASSIGNMENT Menu Memorize Channels (Figure 11) (Figure 9) Select Memorize Channels for each antenna you use. The TV will find and remember strong channels and skip the unused or weaker channels. MAIN MENU SETUP menu Memorize Channels : Ant A Air INPUT ASSIGNMENT turns off unused inputs, turns them on again or changes the name of the input. If you turn an input Off, it will be skipped when you press INPUT on the remote control.
SETUP Menu: Manually Setting the Clock Clock Setting (Manual) Set Day (Figure 12) (Figure 13) The Clock Setting menu default allows the clock time to be set manually. To set the clock automatically, please see page 35. After manually selecting the current time, select the current day. MAIN MENU SETUP MENU To set the clock manually, first select the current time, including AM or PM. CLOCK menu Press or to slowly adjust the time. Press and hold or to quickly adjust the time.
SETUP Menu: Automatically Setting the Clock Clock Setting (Auto) Daylight Savings Time (Figure 14) Set the Clock Setting to Auto to automatically set the day and time using Extended Data Service (XDS) time data. This data is automatically retrieved when tuned to a PBS channel or other channel in your area that provides this service. (Figure 16) Select the Daylight Savings Time (DST) option that your state uses when Auto has been selected for the Clock Setting.
SETUP Menu: Language, Energy Mode Language Energy Mode Display the on-screen menus in either English or Spanish (Español). The first time you powered On your TV, you were requested to select an on-screen menu language. If you choose to change the selection, all menu text will immediately switch to the language of your choice. Change the setting to Low (less than 1 watt) and the TV will operate in an energy saving mode when it is turned off.
CAPTIONS Menu: Overview CAPTIONS Menu (Figure 20) Turn On or Off the closed caption decoder, select the type of captions or text, and choose black or translucent gray as the background color for the closed caption area. Broadcasters can send either Standard or Text closed captioning. Standard closed captioning follows the dialogue of the characters on-screen and displays in a small section of the screen.
CAPTIONS Menu: Closed Captions, Background Color CC Background Closed Captions (Figure 22) (Figure 21) Display one of the following types of Closed Captions: CC1, CC2, CC3, or CC4: Standard closed captioning signals. Display the background color as either black or translucent gray, to make the closed captions easier to read. Text1, Text2, Text3, or Text4: Text closed captioning signals. On if mute: Closed captions when mute.
CHANNEL EDIT Menu: Antenna, Channel Selection Antenna Channel Select Ant-A or Ant-B. For each antenna, you can add or delete channels in memory, name channels, and add channels to the SQV (SuperQuickView™) list. Select to edit the channel selections. You can add or delete from memory, name, or add to the SQV (SuperQuickView™) list. (Figure 23) After selecting Channel, editing can be done using the Adjust buttons or entering the 3 digit channel number you want to change (for channel 2, 002).
CHANNEL EDIT Menu: Memory, Name Selection Memory Name (Figure 25) Add weaker channels viewed with Ant-A or Ant-B and delete unwanted channels, after all available channels have been memorized with Memorize Channels (page 33). Use the CHANNEL button on the remote control to view memorized channels. 1. Select Ant-A or Ant-B. 3. Press ADJUST until you see the underline highlighted in the Name field.
CHANNEL EDIT Menu: Using SQV (Super Quick View™ ) SQV Using The Menu Screen SQV Using The Remote Control Put together a list of your favorite channels from Ant-A and Ant-B using SQV (SuperQuickView™). Store up to 6 channels in each of the 9 different memory banks. After adding a channel to the SQV memory, “SQV” will appear under the channel number on the TV screen. To change SQV choices using the menu: (Figure 28) (Figure 27) 1.
V-Chip Lock Menu: Overview V-Chip Signal Information When provided by the broadcaster, V-Chip ratings can be used to control which programs can be viewed or will be blocked. When V-Chip ratings are sent, you will see the ratings when you change the channel or when you press the INFO button on the remote control. Both TV and Movie ratings will display. TV ratings apply to programs and movies developed for TV and may have supplemental blocking by content categories.
V-CHIP Menu: Setting Up and Using V-Chip Lock Passcode Setting Up the V-CHIP LOCK Passcode Entering the Passcode Select V-CHIP LOCK from the MAIN menu for first time setup or after you have canceled your passcode. You will see the screen shown in Figure 29. Use the number buttons on the remote control to input a new four-digit passcode, then press ENTER. Input your passcode as shown in Figure 30 (Note: Text changes from “a new” to “your” passcode).
V-CHIP Menu: Locking by Time, Front Button Lock, V-Chip Rating Menu LOCK by Time (Figure 33) Select On at Lock by Time, then select the Lock Time and Unlock Time. This will lock the entire TV. Your TV continues to be locked until you input your passcode, or when the locked time expires. If the front panel buttons have been locked and you misplace the remote control, you can restore the function of the front panel buttons by pressing and holding the MENU button on the front panel for more than 8 seconds.
V-CHIP Menu: Allowing or Blocking Ratings, Lock by Time Allowing or Blocking by Ratings (Figure 36) .V-CHIP Start Time and V-CHIP Stop Time Block or Allow programs based upon rating signals sent by the broadcasting station. The factory preset for TV Ratings is TV-PG (Parental Guidance) allowing only programs rated TV-PG or lower. The factory preset for Movies is PG, allowing only movies rated PG or lower. Please refer to page 42 for a detailed ratings description.
ADVANCED FEATURES Menu: Color Balance, Auto Color Correction, PerfectColor ™, Reset Color Color Balance Menu PerfectColor The Color Balance Menu uses six colors (Magenta, Red, Yellow, Green, Cyan and Blue). You may adjust the intensity of these colors automatically or manually or reset them to the default settings. Certain TV channels may appear more green or red than others. This is not a malfunction of the TV and may vary by channel or broadcaster.
ADVANCED FEATURES Menu: TIMER, Timer Menu, and Set Time TIMER menu TIMER (Figure 41) The timer will automatically turn the TV on (if it is off) at the time you schedule and select. When Ant-A or Ant-B is the selected input, you may select any memorized channel. The TV will tune to this channel when the timer turns it on. MAIN MENU (Figure 42) The timer can be turned On or Off. When On, you need to select the time and the day to turn On and the input and channel to display.
ADVANCED FEATURES Menu: Set Day, Input, and Channel Set Day Channel Select the days that the TV will turn on automatically. You can select Everyday, Mon-Fri (Monday through Friday), or the individual days of the week. If the selected input is for Ant-A or Ant-B, the timer will turn the TV to the selected channel.
ADVANCED FEATURES Menu: Video Mute, Black Enhancement Black Enhancement Video Mute (Figure 51) Video Mute, (when On) lets you display a blue background when no signal is being received on Inputs 1-3, DTV, Component 1-2 and MonLink. (Figure 52) The contrast in dark scenes is enhanced for better picture quality. Brighter scenes will not be affected.
AUDIO/VIDEO SETTINGS Menu: Overview AUDIO/VIDEO SETTINGS Menu (Figure 53) Each input has its own A/V memory. You can adjust each input’s A/V memory in two ways. You can use the menu or the remote control. MAIN MENU AUDIO SETTINGS and VIDEO SETTINGS After selecting AUDIO SETTINGS or VIDEO SETTINGS, you can adjust the settings by pressing , , , or . For descriptions of the individual A/V settings, see AUDIO/VIDEO Setting Descriptions, pages 51-52.
AUDIO/VIDEO Setting Descriptions: Audio Audio Settings • Bass Enhances or reduces low frequency sound. • Treble Enhances or reduces high frequency sound. • Balance Adjusts the level of sound between the left and right speakers. • Surround Creates simulated stereo and surround effects. Your choices are: • Listen to (for INPUTs) Is not available.
AUDIO/VIDEO Setting Descriptions: Video Video Settings A compressed (non-HD) video signal may cause what appears to be a “blurry”, “out of focus” or “fuzzy “ picture on a widescreen TV. This is not a malfunction of the TV, but a result of the compressed signal that is sent by cable or satellite. To re-adjust the picture, try the following: Adjust your video settings (specifically sharpness) for optimal picture performance. Change the format size (pages 54-55).
Chapter 5 PIP/POP Operations Available On-Screen Format Sizes ........................................... 54 Operation of PIP and POP............................................................ 56 Appendix A: Bypassing the V-Chip Lock.................................... 57 Appendix B: HD Input Connection Compatibility ...................... 59 Appendix C: Remote Control Programming Codes .................. 60 Appendix D: Cleaning and Service .............................................
Available On-Screen Format Sizes Note: You can find aspect ratios on the back of most DVD covers. Also, Anamorphic DVDs are usually marked “Anamorphic” or “Enhanced for 16:9 TVs.
Available On-Screen Format Sizes, continued Widescreen Picture (16:9 - HD 1080i only) Example: A True HD Broadcast Standard (Recommended) HD Expand (Recommended for 4:3 images with Black Side Bars) Widescreen Picture (480i/480p) Standard (Recommended) Expand Zoom (For letterbox 2.
Operation of PIP and POP Picture Inside Picture (PIP) vs. Picture Outside Picture (POP) You have the option to view two TV shows or inputs at the same time. For example, you can watch a game show and a sports event on another channel, or a DVD movie and more. The PIP option allows you to view another input as a picture-inside-picture. The POP option allows you to view a main picture and another input as a side-by-side or three or nine pictures-outside-picture at the side (only one moving POP).
Appendix A: Bypassing the V-Chip Lock Bypassing the V-Chip Lock After you set the lock, you need your passcode to view a V-Chip locked program, view the locked TV, cancel the lock, or enter the V-Chip lock menus. If you forget your passcode, you can view the locked TV without entering your passcode. When your password is requested, press the number 9 and QV buttons on the remote TV control at the same time. This process temporarily unlocks the TV.
This page intentionally blank 58
Appendix B: High Definition Input Connection Compatibility Component Inputs Input Levels with Component Video These inputs are compatible with most standard DVD and DTV signals with component video outputs. Compatible DTV signals are SDTV 480i, 480p, and HDTV 1080i. • Y = 1.
Appendix C: Remote Control Programming Codes A/V Receivers Mitsubishi ................ 010, 011, 012, 013, 014, 360 Admiral ..................... 220 Aiwa.......................... 225, 226, 241 B & K ........................ 352 Bose......................... 351 Denon ...................... 234, 235, 236, 245, 246, 359, 361 Fisher ....................... 204 Gerrard..................... 213 Harman Kardon ....... 215, 223, 242, 362 Jensen...................... 223, 229 JVC...........................
Appendix C: Remote Control Programming Codes, continued Satellite Receivers /DBS/DTV MitsubishiHD/Satellite Receiver ................... 006, 173 Echostar/ Dishnetwork............. 175, 82, 183, 188 Express Vu............... 175 GE ............................ 176 Gradient ................... 186 Hitachi...................... 173, 181, 184 Hughes..................... 173 Maganavox .............. 171, 172 Panasonic ................ 174 Philips ...................... 171, 172 RCA/Proscan...........
Appendix D: Cleaning and Service Cleaning Normally, light dusting with a dry, non-scratching duster will keep your TV clean. If cleaning beyond this is needed, please use the following guidelines: First, turn off the TV and unplug the power cord from the power outlet. Top and Sides of the TV: • Gently wipe down your TV with a soft, non-abrasive cloth such as cotton flannel or a clean cloth diaper, lightly moistened with water. Dry with a second dry, soft, non-abrasive cloth.
Appendix E: Cleaning the Dust Filter Cleaning the Dust Filter Clean the filter annually and whenever you replace the lamp cartridge. Tools needed: Phillips screwdriver 1. Turn the television off and unplug the AC cord. 2. Locate the dust filter on the left side panel of the TV. 2. 3. Using a Phillips screwdriver, remove the two screws that hold the dust filter cover in place. 4. Remove the filter cover, set it and the screws aside. 5. Carefully remove the filter from the TV. 6.
Appendix F: Lamp Cartridge Replacement Before you replace the lamp cartridge please note the following: CAUTION: If the television is on, press POWER to turn off and allow the television to cool for one hour before attempting to replace the lamp cartridge. LAMP LIFE The light source for this television is a lamp, which is part of a lamp cartridge assembly.
Appendix F: Lamp Cartridge Replacement Replacing the Lamp Cartridge Tool needed: Phillips screwdriver 1. Turn the television off and unplug the AC cord. 2. Remove the front speaker grill by gently pulling on each side. The grill will snap out. 2. 3. Using a phillips screwdriver, remove the three screws (one on the left and two on the right side) that hold the recessed plastic cover in place. 2. 4. Remove the plastic cover and set aside with the screws. 5.
Troubleshooting Problem Possible Solution 1. The TV remote control does not work. • Check that the batteries are installed correctly. • Check that the selected switch is set to “TV”. • Be no further than 20 feet from the TV when using the remote control. 2. The TV takes several seconds to respond to channel commands. • Press ENTER after a channel number to avoid delays. • Use the three digit number, i.e 002 for channel 2. 3. You cannot access a channel.
Troubleshooting, continued 19. There is no picture when using MonitorLink/DVI input with an HDTV receiver or DVD player. • Make sure device is set to Output DVI in Device Menu. • You may need to hook up to an analog input for initial setup. • Power TV off. Unplug DVI cable from device and plug back in. Power TV on first, then the DVI device. 20. No picture displays when using component inputs.
Index A Audio Receiver 15 DTV Receiver 17, 18 DVD Player 16 MonitorLink™ 19 S-Video Device 16 A/V Memory Reset 50 Receiver, Connecting 15 Activating the PIP and POP 28 Advanced Features Menu 32, 46-49 Antenna Channel Edit Menu 39-40 Connecting 12, 13, 14 Appendices A: Bypassing the V-Chip Lock 57 B: High Definition Input Connection Compatibility 59 C: Remote Control Programming Codes 60-61 D: Cleaning and Service 62 E: Cleaning the Dust Filter 63 F: Lamp Cartridge Replacement 64-65 Audio/Video Settings M
Setup 33-36 V-Chip Lock 42-45 MonitorLink, Connecting 19 Moving PIP Images 56 U Use of the Remote Control with Other A/V Products 25-26 Using the AUDIO and VIDEO Buttons on the Remote Control 50 N V Name Menu 40 V-Chip Exceptions: 42 Ratings 42 V-Chip Hours Menu 45 V-Chip Lock Menu 32, 42-45 Overview 42 Signal Information 42 Start Time, Stop Time 45 Video Mute 49 Video Settings Description 52 Video Settings 52 Viewpoint Menu System 30 P PerfectColor™ 46 PIP and POP Activating 28 Changing 56 Freezing
Mitsubishi DLP™ Projection Television Limited Warranty MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants as follows to the original purchaser of this television that if purchased from an authorized MITSUBISHI Audio/Video Dealer, should it prove defective by reason of against defects arising from improper workmanship and/or material: a. Parts. The lenticular (i.e.
c. Proof of purchase date from an authorized MITSUBISHI dealer is required when requesting warranty service. Present your sales receipt or other document which establishes proof and date of purchase. THE RETURN OF THE OWNER REGISTRATION CARD IS NOT A CONDITION OF WARRANTY COVERAGE. However, please return the Owner Registration Card so that we can contact you should a question of safety arise which could affect you. d.
If you have questions that cannot be answered from this book, please call our Consumer Relations advisors at (800) 332-2119 or send an email to: MDEAservice@mdea.com To order replacement remote controls, an Owner’s Guide or lamp cartridge, please call our Parts Department at (800) 553-7278 or contact us through our web site at: www.Mitsubishi-tv.com © 2004 Mitsubishi Digital Electronics America, Inc. 871D424A10 Written and printed in the U.S.
