Operation Manual

14
Part II : Installation
How Connections Affect the PIP and POP
To see a picture in the PIP or POP inset, you
may need to select an input source. If the
only input connected is ANT-A, then both the
main picture and the PIP/POP insert will be
from that input source. If other video equip-
ment is connected, you may be able to view
these input sources as the PIP/POP insert.
When connecting your new Mitsubishi
bigscreen, it is important to understand
which main picture and PIP/POP input
sources can and cannot be used together.
Table 1 shows which inputs can and cannot
be used together and the limitations they
may require. To see if 480i, DTV 480p, 720p,
1080i, Component-1 or Component-2 480p is
being displayed as the main picture, press
INFO on the TV remote control. The on-screen
display, figure 1, will list 480i, 480p, 720p, or
1080i when those signals are being received.
See
Operation of PIP and POP , pages 52 - 53,
for operating instructions.
An asterisk (
) displayed after the signal type
indicates that the signal being received is a
non-standard format. A non-standard format
signal may or may not display properly in a
PIP/POP inset. Whenever the DTV input re-
ceiving a non-standard 1080i signal such as
Sharp box, an asterisk (
) displayed after the
signal type.
How Connections Affect the
System 4 Home Theater IR
Control
The Mitsubishi System 4 Home Theater IR
System Control is a special feature that makes
it easier to use your TV with a digital surround
sound A/V receiver. Once your equipment is
properly connected and set up, your TV and
digital A/V receiver will change inputs to-
gether, to match high resolution pictures with
the proper surround sound.
When you change inputs on your TV to watch
different video products, your TV will send
signals via your remote control to the infrared
emitters to your digital A/V receiver to
change inputs. You will automatically hear the
high quality digital surround sound from
digital products like your DTV receiver and
DVD player, and high quality analog stereo or
surround sound from non-digital products like
your VCR.
Additionally, all IR remote signals from your
Mitsubishi remote or other manufacturers
remote will be passed through your TV to
your A/V devices.Your A/V devices can be
hidden or behind cabinet doors and con-
trolled by pointing the remote at the TV.
How Connections Affect the PIP and POP
Table 1. *No Side-by-Side with the same channel.
**No Side-by-Side with the same input.
PIP cannot display PC.
POP/PIP
NIAM
A-TNA B-TNA 5-1STUPNI
TNENOPMOC
2-1STUPNI
VTD
A-TNA
*KOPOP/PIPONKOKOKO
B-TNA
KO*KOKOKOKO
5-1STUPNI
KOKO**KOKOKO
KO
TNENOPMOC
2-1STUPNI
KOKOKO**KO
VTD
KOKOKOKO**KO
PC-1 / PC-2
NO PIP
DTV
1080i Standard
4:09 AM
TUESDAY
Component-1
480p Zoom
4:09 AM
TUESDAY
or
Figure 1. On-screen display will show 480i, 480p,
720p, or 1080i when those signals are being received.