Operation Manual

6 1. Additional TV Features
For assistance call 1(800) 332-2119
5. Y/ VIDEO (Composite Video)
Analog standard-definition video inputs. Use the adja-
cent R and L inputs if you wish to send audio to the TV
speakers.
6. Y/VIDEO Pb Pr (Component Video)
Analog video inputs able to accept high-definition video
from a high-definition source device. Use the adja-
cent R and L inputs if you wish to send audio to the TV
speakers.
7. L/R (INPUT 1 audio)
Analog stereo inputs for use in conjunction with adja-
cent composite or component video jacks.
8. DVI/PC INPUT
Connect a DVI device to one of the TV’s HDMI inputs
and use this jack to send analog audio to the TV.
9. USB
For software updates only. To check for updates, visit
www.mitsubishi-tv.com and follow the support link.
Using the TV with an A udio- Only Device
To use the TV speakers to listen to an audio device
such as an MP3 or CD player with analog output, follow
these steps.
1. Insert an unused RCA-style connector into the
Y composite video jack. The presence of this con-
nector activates the TV’s auto-detection.
2. When the TV detects the video connector, it will
display the New Device Found screen. Name the
new input CD/Audio or MP3 Player.
3. Connect left (white) and right (red) audio cables
from AUDIO OUT on the device to L and R on the TV.
4. Keep the connector in the Y jack while using the
audio-only device.
3D
GLASSES
EMITTER
ANT
L
R
DIGITAL
AUDIO
OUTPUT
3D
G
LASSE
S
E
MITTER
AN
T
L
R
R
D
IGITAL
AUDIO
OUTPU
T
TV jack panel
L
R
L
R
DIGITAL
AUDIO
OUTPUT
D
IGITAL
AUDIO
OUTPUT
Audio-only
device
Unused
RCA-style plug
(plug in first)
2.
1.
Audio
cables
Inputs and Outputs, continued
Use the HDMI inputs to connect to CEA-861 HDMI com-
pliant devices such as a high-definition receiver or DVD
player. These inputs support 480i, 480p, 720p, 1080i,
and 1080p video formats.
The TV’s HDMI inputs are compatible with many DVI-D
and HDMI computer video signals.
2. ANT ( Antenna)
Connect your main antenna or direct cable service
(without a cable box) to ANT . The ANT input can
receive digital and analog over-the-air channels from
a VHF/UHF antenna or non-scrambled digital/analog
cable source.
3. 3D GL ASSES EMITTER (642 Series only)
Use this jack for the special synchronization emitter sup-
plied with some 3D glasses. The emitter sends out a
signal that synchronizes your 3D glasses with the screen
display.
4. DIGITAL AUDIO OUTPUT
This output sends Dolby Digital or PCM digital audio
to your digital A/V surround sound receiver. Incoming
analog audio is converted by the TV to PCM digital audio.
If you have a digital A/V receiver, this is the only audio
connection needed between the TV and your A/V receiver.