DIBITAL TELEVISIONS '_ DLP TM HIGH-DEFINITION TELEVISION MODELS WD-Y57 WD-Y65 WD-57732 WD-65732 WD-73732 OWNER'S GUIDE • For questions: Call Consumer Relations at 800-332-2119. E-mail us at MDEAservice@mdea.com. Visit our website at www.mitsubishi-tv.com. • For information on Derno Mode and System Reset, please see the back cover. • To order replacement or additional remote controls, lamp cartridges, our website at www.mitsuparts.com or call 800-553-7278.
RISK OF ELECTRIC SHOCK DO NOT OPEN • CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated "dangerous voltage" within the product's enclosure that may be sufficient magnitude to constitute a risk of electric shock.
Our Thanks... Thank you for choosing Mitsubishi as your premier Home Entertainment provider This Ownerts Guide describes the features and functions of your Mitsubishi widescreen, high definition TV. We urge you to examine this Ownerts Guide to become familiar with the innovative features and operations this unique television offers. The very core of our corporate philosophy is to provide our customers with the very best.
Contents Important Information About Your TV General Warnings and Cautions, Notes on Installation and Operation Cleaning Recommendations ........................... ............................................................ Important Safeguards .................................................................. Chapter 1: Television 6 7 8 Overview Package Contents .................................................................... 12 Special Features of Your TV ..............................
Chapter 5: TV Menu Settings 3D Graphical _'VJSWPOJfl[ ® Menu System .................................................... 60 Main Menu .......................................................................... 61 Setup Menu ......................................................................... NetCommand Menu .................................................................. 62 62 Channel Menu ....................................................................... 64 Captions Menu ...............
important important information About Your TV information About Your TV WARNING: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. TV WEIGHT: This TV is heavy! Exercise extreme care when lifting or moving it. Lift or move the TV with a minimum of two adults.
important Cleaning First, turn off the TV and unplug the power cord from the power outlet. Top and Sides of the TV Gently wipe down your TV with a soft, non-abrasive cloth such as cotton flannel or a clean cloth diaper, lightly moistened with water. Dry with a second dry, soft, non-abrasive cloth. For oily dirt, add a few drops of mild liquid detergent, such as dishwashing detergent, to the water used to moisten the cloth. Rinse with a second cloth moistened only with water.
important information About Your TV Important Safeguards Please read the following safeguards for your TV and retain for future reference. tions marked on the television. Always follow all warnings and instruc- 1. Read, Retain and Follow All instructions Read all safety and operating instructions before operating the TV. Retain the safety and operating instructions for future reference. Follow all operating and use instructions. 2.
important Important Safeguards, 12. Power information About 9 Your TV continued Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 13.
Television Overview Package Contents .................................. Special Features of Your TV ............................ TV Front Panel ..................................... TV Back Panel ..................................... CableCARD TM Technology .............................
12 Chapter 1. Television Overview Package Contents 1. Remote Control Please take a moment to review the following list of items to ensure that you have received everything. 2. Two AA Batteries 3. Two=Ended IR Emitter 4. Owner's 5. Quick Reference 6. TV Guide On Screen@ Interactive Program Guide User's Manual 7.
Chapter one-way digital signals with the use of a CableCARD security module. The CableCARD is used in place of a traditional cable box to access digital cable programming (including high definition). Contact your local cable provider for availability information and service details. Home Network _®° Control System Your widescreen Mitsubishi HDTV offers a new level of networking that can seamlessly integrate selected older A/V products with new and future digital products.
14 Chapter 1. Television Overview TV Front Panel Control input 3 iNPUT 3 provides an easily accessible set of standard audio/video jacks. These jacks allow for convenient connection of a camcorder or other audio/video device. Note Panel The shaded buttons on the front control panel duplicate keys on the remote control. The upper labels show control functions when no TV menus are displayed; the lower labels indicate functions when TV menus are displayed or when a special function has been activated.
Chapter LAMP 15 Overview indicators Front=Panel O Off 1. Television O Steady On _) Slow Blinking (_ Fast Blinking L P STATUS T,MER-- I indicator Normal TV on or standby condition. Green _) TV just powered off and lamp is cooling, Starts to blink 30 seconds after turning off TV. TV can be turned on before blinking starts or after blinking stops, but not while the indicator is blinking. Normal operation. Ye"ow _ il Lamp ac_es_ dooiisopen oi ........
16 Chapter 1. Television Overview COMPONENT inputs 1 and 2 offered on models WD-Y57 and WD-Y65. COMPONENT inputs 1, 2, and 3 offered on models WD-57732, WD-65732, and WD-73732. TV Back Panel S-VIDEO F lli:: INFIIli MI DEO @@ AUDIOLEFT (MONO/ DOMPONENT CO M PAT VIDEO: 480i/480r_/721 DVH PC COMPATIBIU REFER TO OWNERS r JIDEm fMONC_ 1. ANT l/MAIN, ANT 2/AUX {Antenna) 2.
Chapter inputs (COMPONENT 1 and 2 on WD-Y57, WD=Y65; COMPONENT 1-3 on WD-57732, WD-65732, WD-73732) (Audio and Video} Y Pb Pr (480i/480p/720p/1080i) Use these jacks to connect devices with component video outputs, such as DVD players, external HDTV receivers, or compatible video game systems. Please see Appendix B for signal compatibility. 5.
18 Chapter CableCARD TM 1. Television Overview Technology CableCARD TM Menu CableCARD is a nationwide system standard that allows your local cable TV provider to supply you with an access card customized to your account. This card allows your TV to receive, decode, and unscramble the premium digital channels included in your cable TV subscription without the use of a cable box.
TV Connections Connection Types ................................... 20 Digital Video and Home Recording ....................... HDTV Cable Box or Satellite Receiver with Component Video Standard Cable Box, Satellite Receiver, or Other Device with S=Video ........................................ .... 21 21 22 Wall Outlet Cable (no cable box) ......................... 22 Antenna with a Single Lead ............................ Antennas with Separate UHF and VHF Leads ................
20 Chapter 2. TV Connections Connection Types Video and Combined These descriptions Audio/Video Connections apply to TV video only and do not cover signals from personal computers. HDMI Digital audio iiii uncompressed digital video on Carries uncompressed digital video alone on a single one-wa_ cable; requires separate audio connections. iiBest (carry highdefinition video Carries digital audio and DVI available) Component Video and standard-definition Analog video @ tion signals.
Chapter Digital Video and Home 2. TV Connections 21 Recording The table below will help you decide which type of connection to use for digital video. Digital video comes to your home in a compressed state, whether received on recorded media (e.g., disc) or broadcast over the air, over cable, or via satellite. Some compressed digital video is available for recording as noted in the table. HDMI or DVI You cannot record the resultant uncompressed video sent to the TV via HDMI or DVl.
22 Chapter 2. TV Connections Standard Cable Box, Satellite Receiver, or Other Device with S-Video Required: S-Video cable and left/right analog stereo audio cables. 1. 2. Wall Outlet Cable (no cable box) (can be used with a CableCARD It is very important to connect the incoming cable for your primary viewing source to ANT l/MAIN, especially for CableCARD TM use. 1. Connect the cable from the outside cable or satellite service to CABLE IN or SATELLITE IN on the cable box or satellite receiver.
Chapter Antenna with a Single Lead A. For an antenna A 300-ohm-to-75-ohm transformer is required. This is not included with the TV, but is available at most electronics stores. A1. For an antenna with flat twin leads, connect the 300ohm twin leads to the 300-ohm-to-75-ohm transformer. A2. Push the 75-ohm side of the transformer onto ANT 1 on the TV back panel. with coaxial Required: UHF/VHF combiner This is not included with the TV, but is available at most electronics stores. 1.
24 Chapter 2. TV Connections VCR to an Antenna or Wall Outlet Cable 5. Required: Two-way RF splitter, 3 coaxial cables, right and left analog audio cables, either S-video or video cable. These are not included with the TV but are available at most electronics stores. 1. Connect the incoming cable or antenna to iN on the RF splitter. 2. Connect one coaxial cable from OUT on the RF splitter to ANTENNA iN on the VCR back panel.
Chapter VCR to a Cable Box (Audio & Video) Connect the incoming cable to iN on the RF splitter. 2. To use the TV speakers with the VCR, connect left (white) and right (red) audio cables from AUDIO OUT on the VCR back panel to INPUT/AUDIO LEFT and AUDIO RIGHT on the TV back panel. If your VCR is mono (non-stereo), connect only the white (left) cable. 7.
26 Chapter 2. TV Connections HDM! Device (Cable Box, Satellite DVi Video Device (Cable Box, Receiver, DVD Player, or Other Device) Satellite Required: the TV. HDMI-to-HDMI cable. This is not included with Connect an HDMI cable from the TV back panel to the HDMI device output. HDMI devices provide video and audio through this cable, so no other connection is required. There are two HDMI inputs on the TV back panel.
Chapter 2. TV Connections 27 DVD Player with Component Video A/V Receiver (Sound System) Component video cables and analog audio cables are required. These are not included with the TV. Most setups require either a digital audio cable or analog stereo audio cables. 1. Connect the component video cables from Y PB PR VIDEO OUT on the back of the DVD player to the COMPONENT jacks on the TV back panel, matching the red, green, and blue colored connections. 2.
28 Chapter 2. TV Connections Older Cable Box Camcorder Required: 3 coaxial cables, one two-way RF splitter. These are not included with the TV. Required: Analog stereo audio cables and either an SVideo or composite video cable. When this setup is complete, you can use the TV remote control, when programmed, to change channels on the cable box. NOTE: For IEEE 1394 camcorders, see also later in this chapter under "IEEE 1394 Devices." Note: 1.
29 2. TV Connections Chapter IEEE 1394 Devices Compatible IEEE 1394 Devices Compatible A/V devices include some, but not all, cable boxes, D-VHS VCRs, A!V discs, and future products. Some devices may have IEEE 1394 connectors but are not compatible with the TV. Areas of compatibility to consider are: 4-pin connector 6-pin connector 6-pin-to-4-pin adapter 1. Digital Video Signals The TV can decode MPEG2 video as provided by cable boxes and some camcorders.
30 Chapter 2. TV Connections IEEE 1394 Devices, continued Tips for Connecting • IEEE 1394 Devices Do not loop the last device in the chain back to the TV. When the device chain is looped, the TV may not be able to work with the other devices. DigEtal TV Place devices that have only a mechanical (two-position) power switch at the end of the chain or leave the power switch in the on position. When turned off, IEEE 1394 signals may not be able to pass through the device to other devices.
Chapter lit Emitter NetCommand® Guide On Screen and TV 5. Place any unused ends behind the devices to prevent stray signals from reaching the IR sensors. iiiii An IR emitter cable is included with the TV, 3. The NetCommand system uses emitters connected to the IR EMITTER jack to control other devices such as VCRs, DVD players, cable boxes, and satellite receivers. This control system is shared with the TV Guide On Screen system. 1. 2. 3.
32 Chapter 2. TV Connections Helpful Hints for NetCommand Connections Q. My VCR (or other device) does not have two sets of stereo audio outputs. audio to both the TV and the A/V Receiver? A. How can i connect this device's You need to connect the device to the TV and then make changes to the A/V receiver setup. 1. 2. 2. Connect the VCR's audio and video to the TV; connect the single set of stereo audio outputs to the TV only. Perform the procedure for setting up a device connection.
TV Setup Guidelines for Setting Up and Using Your New Widescreen When You First Power On the TV ........................ TV . . . 34 36 Using the TV's Setup Menu ............................ When You First Connect a Device ........................ 36 39 initial NetCornrnand® 42 Additional Setup ........................... Setup Using the NetCornrnand Menu ..............
34 Chapter 3. TV Setup Guidelines for Setting Up and Using Your New Widescreen Getting 1. 2. to control recording, see the separate TV Guide On Screen® Interactive Program Guide User's Manual. Started Read the section entitled "important About Your TV" starting on page 6. information . Choose a location for your TV. • Allow at least four inches of space on all sides of the TV to help prevent overheating. 4. Avoid locations where light may reflect off the screen.
Chapter installing the Remote Control Batteries Care of the Remote • 3. TV Setup 35 Control Use only alkaline batteries. Be within 20 feet of the equipment. 1. Remove the remote control's back cover by gently pressing in the tab and lifting off the cover. 2. Load the batteries, making sure the polarities (+) and (-) are correct. For best results, insert the negative (-) end first. 3. Snap the cover back in place. (9 (9 The remote control requires two AA alkaline batteries.
36 Chapter 3. TV Setup When You First Power On the TV Choosing a Language for Menus When you power on the TV for the first time, you can select either English or Spanish for all menus. You can later change the language through the Setup menu. Using the TV's Setup Menu Use the Setup menu for basic TV setup options. To display the Setup menu, press MENU to open the Main menu. With the Setup icon highlighted, press ENTER. Figure 3. Open Language the Setup (Setup menu from the Main menu.
Chapter Setup Menu, continued Note: Note: o If using a CableCARD TM, the complete list of available channels is provided through the CableCARD and the ANT 1 option is grayed out. In the TV Guide On Screen® system, the channels displayed and the order in which they are displayed are independent of the TV's channel memorization. Refer to the TV Guide On Screen Interactive Program Guide User's Manual for detailed instructions on editing channels shown in this guide.
38 Chapter 3. TV Setup Setup Menu, continued Set Day Select the day or days that the TV will turn on automatically. Press _, or V to select Daily, Mon-Fri (Monday through Friday), or individual days of the week. Press I_ to move to the Time box. either Low Power or Fast Power On. The Low Power setting uses less energy, but TV power-on takes longer. The default is Fast Power On. Keep this setting at Fast Power On if you: • Timer and for scheduling NetCommand-controlled recordings.
Chapter 3. TV Setup 39 When You First Connect a Device During the initial set-up process for a device, the TV will: a. detect the connected device b. c. d. prompt you to identify the device by name prompt you to perform NetCommand set-up for the device, if applicable repeat the above steps for any additional newly connected devices ClearThought® Easy Connect Auto input Sensing This TV's ClearThought® auto input sensing feature detects most connections automatically.
40 Chapter 3. TV Setup When You First Connect a Device, continued IEEE 1394 Connections The New 1394 Device screen appears if you connected an IEEE 1394 device. See figure 7. IEEE 1394 devices are automatically under NetCommand control. The TV can recognize up to seven IEEE 1394 devices at one time. If you connect more than one device of the same type, a unique identifier is added to the name for each one. For example, if you connect three A/V discs, you may see AV Disc, AV Disc1, AV Disc2.
Chapter NetCornmand Specialized Device 3. TV Setup Keys Refer to this chart when "learning" device keys. Write in functions you assign to the F1-F4keys.
42 Chapter 3. TV Setup initial NetCommand® What 3. Setup You Need to Know About NetCommand o NetCommand o NetCommand operates by sending signals from the TV to your other devices via the IR emitters, telling the devices to play, record, change inputs, adjust volume, change channels and many more functions. All this is accomplished with the TV's remote control and the slide switch left in the TVposition.
Chapter Initial NetCommand@ continued 43 Setup, 7. Press the A Y 4 I_ keys on the TV's remote control to highlight other keys on the list. Repeat steps 4 and 5 for each additional function you wish to control through NetCommand. 8. If the device's remote control has keys that do not appear in the list, you can associate up to four keys with the F1through F4keys. For example, for a DVD player, assign the F1and F2keys to the DVD player's CHAPTER SKIP FORWARD and CHAPTER SKIPBACK keys.
44 Chapter 3. TV Setup Additional Setup Using the NetCommand Menu, continued Add or Remove Device Keys from NetCommand Control 1. To "Learn" device keys, you must be watching the device. Press INPUT, highlight the icon for the affected device, and press ENTER. 2. Open the NetCommand menu, highlight the Learn button, and press ENTER. 3. When the Learn screen displays, continue as described earlier under "Initial NetCommand Setup for Most Device Types." To Replace input Jack Figure 12.
Chapter Additional Setup Using the NetCommand Menu, continued 3. TV Setup A/V Receiver Audio inputs (numbers 1-4 refer to the IR learning sequence 45 in this screen) sound such as Dolby Digital or DTS directly to the A/V receiver, bypassing the TV entirely. A DVD player is used in this example. It is also possible for your setup to include two (or more) devices with digital surround sound connected directly to the A/V receiver.
46 Chapter 3. TV Setup Additional Setup Using the NetCommand Menu, continued 5. The TV setting here indicates that audio out from the TV (DIGITAL AUDIO OUT or AUDIO OUT LEFT/RIGHT) is sent to the A/V receiver's TV AUDIO input. Audio from ANT 1 and ANT 2, memory cards, and IEEE 1394 devices must go to the A/V receiver from the TV's audio outputs as there is no way to send the audio directly to the A/V receiver. Part 2: Learn A/V Receiver Power and Volume Keys 1.
TV and Features Remote Control .................................... Choosing a Program Source ....................... o_oooo,v,o_o c_oo_o, _o_ .................... Status Display ................................... Split Screen ............... F ........................ TV Signals and Display ormats ......................... Memory Card Playback ...............................
48 Chapter 4. TV Operation and Features Remote Control 13. INPUT:Displays the input Selection menu from which you can select an input source to view, such as an antenna input (ANT 1/2) or a connected device. Overview Figure 1, next page 1. Slide Switch: Selects the A!V device to be controlled by the remote control. Set the slide switch to TVfor operation of the TV, NetCommand-controlled devices, and IEEE 1394 devices.
Chapter Remote Control, continued Sleep 4. TV Operation and Features 49 Timer Setting the Sleep Timer 1. Press SLEEP on the remote control. 2. Press SLEEP additional times to increase the time in 30minute increments up to the maximum of 120 minutes. 3. Press EXITor wait five seconds without pressing any buttons for the message to disappear. 4. Press SLEEP to view the time remaining before the sleep timer turns off the TV. Cancelling the Sleep Timer 1.
50 Chapter and Features 4. TV Operation Choosing a Program Source with the major channel and sub-channels (or bitstreams). Analog channel information is displayed as sent. NOTE: If your only viewing sources are connected to the ANT 1 and ANT 2 antenna jacks, you can switch inputs without the Input Selection menu. Press INPUT to switch between ANT 1 and ANT 2. To Note: If limited data is shown or no program data appears, it is because the broadcaster is not sending the information.
Chapter 51 and Features 4. TV Operation Status Display The on-screen status display appears when you turn on the TV, change inputs, change channels, or press the INFO button on the remote control. The most common displays 1. 2. 3. 4. 5. 6. 7. 8. 9. Source Antenna or Input Analog Channel being received (If an antenna source) Channel Name (if or named in the Channel menu) Signal Type Being Received.
52 Chapter 4. TV Operation and Features Split Screen Split Screen allows you to view pictures from two different sources at the same time. Split Screen is available when you have video sources connected to the TV in addition to connections on ANT I or ANT 2. Operation Turn Split Screen on or off Press SPLIT. Switch the sound source between main and sub-pictures. Press 4 or _. The speaker icon appears briefly to indicate the sound source as either the main picture (left) or sub-picture (right).
Chapter Split Screen 4. TV Operation and Features Displays 16:9 Main Picture/ 4:3 Sub-Picture 16:9 Main Picture/ 16:9 Sub-Picture 4:3 Main Picture/ 4:3 Sub-Picture 4:3 Main Picture/ 16:9 Sub-Picture Press _ Press _ Press _FOt_MATq Press _ Press _ Press _ Press _ Press Display choices. Press the FORMAT key repeatedly while in Split Screen mode to view different displays. TV inputs for Split Screen The available Split Screen picture sources are listed below.
54 Chapter 4. TV Operation and Features TV Signals and Display Formats TV Display This is a widescreen TV, also known as a 16:9 TV. This shape reflects the new types of images available from HDTV and many DVDs. There are still many older style narrow-screen images (called 4:3 aspect ratio) you will encounter. While there is no perfect solution for displaying a squarish, narrower image on a wide screen, Mitsubishi offers several display formats from which you can choose.
Chapter TV Display 4. TV Operation and Features 55 Formats See descriptions on the preceding page.
56 4. TV Operation Chapter Memory Memory and Features Card Playback Card Viewing Using the Picture Reader (models WD=57732, WD=65732, WD=73732) Inserting 1. a memory card table below. Normally the label side should be up, but if the card does not fit, try turning the card over and insert again. When properly inserted, the light next to the slot will light up and the TV will automatically switch to the card display.
Chapter Memory Card Playback, continued will be scaled to the TV display. be cropped to fit. Compatible Audio and Features 57 Files (MP3 or WMA) Files recorded with sampling rates of 32 kHz, 44.1 kHz or 48 kHz. Some pictures may o Full path file names can be no longer than 50 characters and must end in a .jpg extension. Not all 50 characters will display. 4. TV Operation Files recorded with fixed bit rates File names with .mp3 or .
TV Menu Settings 3DGraph_oa_ _ViSWP0JRI ®Menu system ..................... Main Menu ............... Setup Menu .............. NetCommand Menu ........ Channel Menu ............ Captions Menu ............ Parental Lock Menu ........ ....................... ....................... ........................ ....................... ....................... ....................... Setting a Pass Code ................................. Lock TV by Time and Front-Panel Lock ...................... Rating Menus .....
60 Chapter 5. TV Menu 3D Graphical Settings Menu System 3D Graphical VIRWPUiI1P on-screen Your TV has Mitsubishi's exclusive operating system, which provides on-screen information for menu choices and changes using the TV's remote control. _ Menu Screens The _VJ_WP0J_I ® system includes the following special features: A picture (icon) is highlighted on the menu screen when selected with the directional arrows A Y 4 I_. You may then make changes within the menu or access submenus, if available.
Chapter 5. TV Menu Settings 61 Main Menu Press MENU on the remote control to open the Main menu, figure 1. See below for an overview of the options available through the Main menu. Figure 1. Main menu. Setup See chapter 3, "TV Setup," for use of the Setup menu. • Select English or Spanish for menus and on-screen displays. • Memorize the available channels for the antenna or cable service connected to the ANT I and ANT 2 jacks.
62 Chapter 5. TV Menu Settings Setup Menu See chapter 3, "TV Setup," for use of the Setup menu. NetCommand Menu The features described in this section are available even if you have not performed NetCommand setup. See chapter 3, "TV Setup," for options available for NetCommand-controlled devices. Review L__J TV Connections (no NetCommand setup required} Press A V 4 l_"to highlight Review and press ENTER to display the Review screen (see figure 2).
Chapter NetCommand Menu, continued To Replace One Device with Another on an input Jack 1. Disconnect TV. the device you wish to remove from the 2. Connect the new device to the vacated jack. 3. Open the Input Name menu from the NetCommand menu. 4. Select a device name from the list for the input. 5. Open the Review screen and confirm the change.
64 Chapter 5. TV Menu Settings Channel Menu nels listed, use this menu to delete analog channels from memory. Press CR/_/V to review the channels in memory. Press A V to select Added or Deleted for the channel shown in the Channel box. To Add a New Digital Channel 1. In the channel menu, enter the physical channel number in the Channel box, including the subchannel number; press _ (-/CANCEL) and then enter the sub-channel number. If no sub-channel is specified, press _ and 1. 2.
Chapter 5. TV Menu Settings 65 Channel Menu, continued FAV {Channel Menu) The FAV feature lets you store groups of favorite channels in up to nine different FAV memory banks. For example, each household member can store favorite channels in their own bank or you can store groups of channels by content, e.g., news, sports, children's programming, etc. You can store the same channel in multiple FAV banks.
66 Chapter 5. TV Menu Settings Captions Menu Digital Captions For analog channels, broadcasters can send either standard closed captions or text service. Standard closed captions follow the dialogue of the characters on screen and display in a small section of the screen. Text-service closed captions often contain information such as weather or news and cover a large portion of the screen.
Chapter Captions Menu, continued Opacity 5. TV Menu Settings 67 (Font) You can customize the visibility of your fonts using the following settings: Size Select the desired font size. Large is the recommended font size. • Color The available font colors are listed below. Text and back- • Translucent: TV program is dimmed behind the text Transparent: behind.
68 Chapter 5. TV Menu Settings Parental Lock Menu Lock TV by Time and Front=Panel The Parental Lock menu gives you control over three different types of parental controls. You must use a pass code to open this menu to enable/disable the lock options. The three parental controls available are: Lock by Time (Parental Ratings (U.S. Ratings/Other Ratings} V-Chip technology lets you restrict access to programming based on program-rating signals sent by the broadcaster. For U.S.
Chapter Parental Lock Menu, continued U.S. Ratings 8. Menu Use this menu to turn U.S. rating restrictions on or off and to change the permitted rating levels. TV Content Categories 9. 5. TV Menu Settings 69 To set the time of day for these restrictions to be in effect, press I_ to move to the Start box. To make the rating restrictions active twenty-four hours a day, set Start and Stop to the same time. To set the time: a.
70 Chapter 5. TV Menu Settings Parental Lock Menu, continued mark, press ENTER to remove the check mark and allow programs with this rating. 8. 1. Highlight the button labelled Other Ratings on the Parental Lock menu (see figure 9) and press ENTER to open the Other Ratings menu (see figure 11). 2. Press A Y to select On or Off. 3. If you selected On, press 1_to move to the Rating Group box. Note that you can change settings only for the rating system available on the currently tuned channel.
Chapter 5. TV Menu Settings 71 V-Chip Signal Information When provided by the broadcaster or program source, V-Chip ratings let you control the types of programming that can be viewed on the TV. When V-Chip ratings are supplied, they are displayed when you change the channel or press INF0on the remote control. TV Ratings TV ratings apply to TV programs and made-for-TV movies. You can apply supplemental blocking to TV ratings based on the TV content categories described below.
72 Chapter Audio/Video 5. TV Menu Settings Menu TV Speakers This selection turns the TV's internal speakers on or off. Select Off: • When sending the sound through a separate sound system or surround sound A!V receiver. If your A!V receiver is under NetCommand Note: To prevent damage from a sudden increase in volume, turn the TV volume down low before changing this option to On. Audio/Video Figure 12.
Chapter Audio/Video • Menu, continued To receive the best fidelity with music programs, change this setting to Off. When connecting to an A/V receiver, set Level Sound to Off and turn off the TV speakers to send full dynamics to the A/V receiver. Analog=Only Audio Digital=Only 0 Settings 73 Settings Language Determines what possible language you can hear. The Language option is available for IEEE 1394 devices but not for devices connected to the INPUT, COMPONENT, and HDMI jacks.
74 Chapter Audio/Video Video 5. TV Menu Settings Select the PerfectColor option and press ENTER to open the adjustment screen. Menu, continued Individual sliders for each color are displayed. Press A Y to move from one color to the next. Highlighted text shows which slider you are adjusting. Press 4 _ to change settings. Press CANCELwhilein the PerfectColor screen to reset all colors to the default Settings Enter the video adjustment mode using either the Audio/ Video menu or the VIDEO key.
Chapter Audio/Video SharpEdge TM (modelsWD-57732, WD-65732, WD-73732): When On is selected, special edge sharpness enhancements are applied to the vertical edges of images.
NetCornrnand nctions NetCornmand-Controiled Devices and the input Selection NetCornrnand-Controlled Recording ...................... Using IEEE 1394 Devices .............................. Menu..
78 Chapter 6. NetCommand Functions NetCommand-Controlled Devices and the input Selection Menu For devices under NetCommand tion menu allows you to: • control, the Input Selec- Select the device for viewing Switch audio between the TV speakers and A/V receiver Power compatible devices on or off Verify the destination of signals. Connection Section input Section Audio Section The Remote Control and NetCommand Point the TV's remote control at the TV when operating NetCommand-controlled devices.
Chapter NetCommand-Controlled Recording from the Recording Setup the Menu Immediate Recording 1. (RECORD) to open the Recording Setup menu. Press (_ Figure 2. 2. The Recording Setup • Functions With the minutes highlighted, select the minutes. 79 press A Y to Day. Use A V to select a day of the week. 5_ Select Add and press ENTER to add the recording to the Record List. A confirmation message will be displayed if your selection is successful.
80 Chapter 6. NetCommand Functions NetCommand= Controlled Recording, continued Immediate Recording from ChanneiView 1. Press INPUT to open the Input Selection menu. Highlight an ANT 1 or ANT 2 program source and press ENTER. 2. Press GUIDE to open the ChannelView channel guide for the current antenna input. 3. Use _, V to highlight the channel and program you wish to record from the list of channels. 4. Press (_ (RECORD}. The TV will tune to the channel if needed.
Chapter NetCommand= Controlled Recording, continued Record Menu: Setting Recording 6. NetCommand Functions 81 that the TV screen format is set to standard (see the section on TV formats in this Owner's Guide). Defaults The Record menu allows you to set defaults for your recording devices, set up recordings, view the Record List, and cancel scheduled recordings. Highlight the Record icon on the Main menu to view the Record menu.
82 Chapter 6. NetCornmand Functions NetCommand=Controlled Recording, continued • The VCR must be set manually to "Line Input." Display the Input Selection menu, highlight the VCR and press GUIDE to change VCR inputs. The TV can select channels on compatible cable boxes for recordings when the cable box is under NetCommand control. Leave the cable box turned on. If the source device or recording device does not have separate power on and off features, then leave that device powered on.
Chapter Switching Between 1394 Outputs Using IEEE 1394 Devices IEEE 1394 Menu Devices and the input 6. NetCommand Analog To enable switching between you must have check marked tion box when the New 1394 when you first connected the Setup." Selection When you connect an IEEE 1394 device to the TV network and power it on, the new device is automatically detected.
84 Chapter The TV Remote Devices • 6. NetCommand Control Functions and IEEE 1394 To Power Device On or Off a Compatible IEEE 1394 For compatible satellite receivers and some cable boxes, the TV remote control GUIDE key displays the on-screen programming guide for the receiver or cable box. Press A V 41 _ and ENTER to navigate the displayed program guide. Usually, compatible IEEE 1394 devices power on when selected in the Input Selection menu and power off when you turn off the TV.
Chapter A/V Discs 6. NetCommand Functions 85 The Track List may also display copy status for a track. You may see the following status displays: A/V Disc Track List Screen When viewing an A/V Disc: Press GUIDE to display its Track List (see figure below). Press A or Y to navigate through the Track List. To play a track, select it on the list, then press ENTER. Press INFO to view details for a highlighted track, if available. • To move through listings quickly, press PAGE A/V.
86 Chapter 6.
Using the TV with a Personal Computer Setup .......................................... Video Adjustments .................................. Connecting a Computer to the TV ...................... Adjusting image Resolution ........................... Computer Display Formats ...........................
88 Chapter 7. Using the TV with a Personal Computer Setup Video Adjustments 1. 1. 2. Power on the computer if it is not already on. 3. Change the resolution of the computer image. The goal is to maximize the computer resolution while maintaining a suitable aspect ratio for the image. See the explanation later in this chapter. 4. Perform TV video adjustments. Press VIDEO repeatedly to cycle through the video-adjustment options.
Chapter Connecting Computer Required: a Computer with DVi Digital 7. Using the TV with a Personal to the TV Monitor Output DVl-to-DVl cable, stereo audio cables If the computer's audio output is a single mini jack, a mini audio-to-RCA-male "Y" adapter cable is also required. 1. Connect the DVl-to-DVl cable from the computer DVI output to the PC-DVl jack on the TV back panel. 2.
90 7. Using the TV with a Personal Chapter Connecting a Computer to the TV, continued Computer with VGA 15=Pin Monitor Output (Analog Video) Required: 15-pin computer VGA-to-DVI cable or a VGA computer cable and a DVI/VGA adapter, stereo audio cable. If the computer's audio output is a single mini jack, a mini audio-to-RCA-male "Y" adapter cable is also required. fir"st select the of the NetCommand __st __Vbox 1. Connect the computer's PC MONITOR OUT to PC=DVI on the TV back panel.
Chapter Adjusting 7. Using the TV with a Personal Image Resolution 6. Your Mitsubishi TV can display resolutions from standard VGA (640 x 480) through 1920 x 1080 signals at a refresh rate of 60 Hz. Note that 1280 x 1024 and 1920 x 1080 signals are supported only for digital computer signals. The resolution of 1920 x 1080 is supported at refresh rates of 24, 30, and 60 Hz. See Appendix B in this book for more on compatible screen resolutions. In most cases, the computer match to display on the TV.
92 Chapter 7. Using the 71/with a Persona! Computer Display Formats Repeatedly press the FORMAT key to cycle through the TV displays available for your computer's video signal.
ppendices Appendix Appendix A: Bypassing the Parental Lock ................. B: Specifications ............................ Appendix Appendix Appendix C: Lamp Cartridge Replacement ................. D: Programming the Remote Control ............. E:' Troubleshooting .........................
[ Appendices 95 | Appendix A: Bypassing Parental Lock the Bypassing the Parental Lock After you set the lock, you must use your pass code to view a locked program, view the locked TV, cancel the lock, or enter the Parental Lock menus. If you forget your pass code, you can view the locked TV without entering your pass code. When you are prompted for your pass code, press the number 9 and OV buttons on the TV remote control at the same time.
96 Appendices This page intentionally left blank
Appendices 97 Appendix B: Specificafions i WD-Y57, WD-Y65 WD-57732, WD-65732 DLP, 0.65" chip, 1920 x 1080 pixels with Smooth Picture WD-73732 DLP, 0.
98 Appendices Appendix B: Specifications, Video WD-73732 continued 1 44 3/4 Video: RCA Pin Plug 1.0 Vp-p, 75-ohm ignal Type: NTSC 480i only 69 7/8 21 5/16 190.0 Ibs. 290 w IEEE 1394 System Compatibility • This television is designed to conform to IEEE 1394 AV/C Software standards in effect at the time of development. This networking and control technology is designed to provide high-performance digital connections and product control, making the product easier to use.
99 Appendices Appendix C: Lamp Cartridge Replacement A A BURN DANGER! During normal operation, the surfaces the TV near the lamp are extremely inside hot. TOUCH THE LAMP CARTRIDGE BY THE HANDLE ONLY Do not touch the glass parts of the lamp cartridge. CAUTION: if the television is on, press POWER to turn it off. Unplug the television it to cool for at least one hour before attempting to replace the lamp cartridge.
1 O0 Appendices Appendix C: Lamp Cartridge Replacement, continued WARNING THE COVER IS PROVIDED WITH AN INTERLOCK TO REDUCE THE RISK OF EXCESSIVE ULTRAVIOLET RADIATION. DO NOT DEFEAT ITS PURPOSE OR ATTEMPT TO SERVICE THE TV WITHOUT REMOVING THE COVER COMPLETELY. Removing the Old Lamp Handle (step 5) Cartridge 1. Turn off TV power and allow the lamp to cool for at least one hour before proceeding. 2. After the lamp has cooled, remove the cover. Refer to figure 1.
Appendices Appendix D: Programming the Remote Control This appendix explains how to program the TV's remote control to operate other A/V devices. This is distinct from NetCommand "Learning." To summarize: the TV's remote control can be made to operate other devices by two different methods: • Remote Control Programming: you must move the slide switch to the position specific to the type of device. NetCommand® "Learning": you can operate other devices with the slide switch in the TVposition.
102 Appendices Appendix D: Programming the Remote Control Programming Method the Remote Control 1: Code Entry Move the slide switch at the top of the remote to the position for the product you want to control. Refer to the table below. Only one of each device type can be controlled in each slide-switch position. 1. Once you have found the correct code, write it in the space below for future reference. 6.
Appendices Appendix D: Programming the Remote Control Programming Audio Lock: Universal A/V Receiver 103 Codes Control With Audio Lock active, the remote control operates the volume and mute functions of the A/V receiver in all positions of the slide switch. Activate Audio Lock if you normally use an A/V receiver with your TV and other A/V equipment. 1. 2. 3. Program the AUDIO position for your A/V receiver as described earlier in this section. Move the slide switch to the AUDIO position.
104 Appendices Appendix D: Programming Programming Codes, the Remote Control continued 31609, 31511, 31390, 31254, ...................................................................................................................... 31023_ 30531 ...................................... Rio 31869 Capetronic 30531 Coh_ Curtis 31263 30797 31869 ....................................... sony ........ ...... ..............................................................................................
Appendices Appendix Programming D: Programming Codes, 105 the Remote Control continued TAG McLaren 30157 .... Tascam .............................................................................. 30420 ...................................................................... 30072 30681, 30626, 30190, 30420, 30393, 30378, 30180, 30174 Technics 30303 30029 Tivoli Audio 31553 KLH ...... 3!711 31373 31372 3!3!8 ......... Toshiba ...................................... 30299 300!9 ...........................
106 Appendices Appendix D: Programming the Remote Control Codes, continued 10015, 10014, 10012, 10011, 10003 V2 ........................................................................................................................... ..................................... Panther 10883 10637 i110023 Akai 21089 20770 RCA 11256 10021 ......................................................................................................................................................................
Appendices Appendix D: Programming Codes, 107 the Remote Control continued 20490 .......................................................................................................... 2o539 2o5Q3 ............................................ ....... PianoD!sc ................................................................................................... .............................................................
108 Appendices Appendix D: Programming Programming Techwood Codes, the Remote Control continued 20692 20790 Echostar 11775!!505 !!005 10775 11775, 11505, 11170, 11005, 21265 Hughes Network 11749, 11444, 11443, 11442, iLo 11535 Jerro!d...................................................................................... .............................................................................................................. :1:1775_1!!70! OZZ#...................................... ...
Appendices Appendix Programming D: Programming Codes, 109 the Remote Control continued Hewlett Packard 21972 Humax 20739 .... Hush........................................................................................ .................................................... Asha Audiovox Beaumar_ 20240 20278 20037 ...................................... :: 1: KEC ............... 20278 2oo3z Bell & Howell 20104 Kenwood ..............................................................................
110 Appendices Appendix D: Programming the Remote Control Programming Codes, continued STS 20042 20000 Philips 21181, 21081, 20739, 20618, Toshiba 21972,21503,21008,20212, 20210,20209,20066,20045, 20043 Touch 21972 Pioneer Portland 20020 20240 Radix 20037 Realistic 20104,20066,20062,20048, 20047,20046,20037,20035, ..... _e£!ayTy Ricavision Ricoh Runco Salora Samtron ....... _ Sansui 206!6 206! 21972 20034 20039 20075 Yamaha 20038 !i!20039 200342003320000 !! ,_ZT Grou# ...............
Appendices Appendix System 111 E: Troubleshooting Reset Button If the TV does not respond to the remote control, front panel controls, or will not power on/off, press the SYSTEM RESET button on the front panel with a pointed object, such as the point of a pencil or end tip of a paperclip. The green LED will flash quickly for about one minute. When the green LED stops flashing, you may turn on the TV. The changes you made most recently, before using SYSTEM RESET, may be lost.
112 Appendices Appendix E: Troubleshooting, continued General TV Operation Symptom Remarks 1. A fan is running even while the TV is powered off. Normal TV operation. When the TV is off, internal components continue to draw power and must be cooled by the fan. 2. The TV remote control does not work. • + 3. TV does not respond to the remote control or to front panel control and TV will not power on or off. Use the System Reset button. 4.
Appendices Appendix E: Troubleshooting, 113 continued TV Power On/Off 1. Symptom Remarks TV takes an excessively long time to power • On. • When switched on, the TV needs time to boot up, just as a computer does. Also, the TV's lamp requires a few moments to heat up to full brightness. TV Energy Mode is set to Low Power. To change TV Energy Mode to Fast Power On: Press MENU, open the Setup menu, highlight the Fast Power On radio button, press ENTER. TheTV may be locked.
114 Appendices Appendix E: Troubleshooting, continued Picture Symptom Remarks 9. Screen is black when trying to view digital channels or IEEE 1394 device. The PerfectColor TM color balance has been incorrectly set. Press VIDEO repeatedly until you see the PerfectColor option and press ENTER to open the PerfectColor TMmenu. 10. DVCR analog/digital If the tape is currently playing but no picture displays, there may be a mismatch of the media with the display.
Appendices Appendix E: Troubleshooting, 115 continued IEEE 1394 Recording Symptom Remarks 1. Program to be recorded was correctly selected from ChanneIView, however, incorrect program was recorded. The broadcaster supplied program information that was incorrect and/or was changed after a recording was added to the Record List. 2. Incomplete ChannelView program recorded. Recording device may lack sufficient recording. 3. ChannelView program recording failed.
116 Appendices Appendix E: Troubleshooting, continued IEEE 1394 Devices 3. Symptom There is no audio and video from the IEEE 1394 device. Remarks = • The device is not turned on. Turn the device power on. No media (tape or disc) is inserted into the device. The media is blank (has no recording). The play command failed - Try pressing play again on the device's remote control or front panel. The device is already in use (for example, the device is currently recording).
Appendices Appendix E: Troubleshooting, 117 continued NetCommand Symptom 1. Cannot see the A!V Receiver menu. NetCommand keys. unable to learn specific device Remarks The A/V Receiver is not connected to any video input of the TV. To check the A/V Receiver menu, temporarily plug into an unused input of the TV, such as Input 3. Exit the Auto Input Sensing screen and select Input 3 from the Input Selection menu. Press MENU. • Device does not use IR format for remote control signal.
118 Trademark and License Information Trademark and License information LICENSOR'S SUPPLIERS DO NOT MAKE OR PASS ON TO END USER OR ANY OTHER THIRD PARTY, ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY OR REPRESENTATION ON BEHALF OF SUCH SUPPLIERS, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. CableCARD is a trademark TM CompactFlash® and CF are trademarks of the CompactFlash DCR TM Certification Inc. Association.
Trademark and License 119 Information Mitsubishi TV Software LICENSE AGREEMENT END-USER FOR EMBEDDED SOFTWARE iMPORTANT - READ CAREFULLY: This License Agreement is a legal agreement between you (either an individual or an entity) and Mitsubishi Digital Electronics America, Inc. (MDEA) for all software pre installed and/or provided along with this television ("Software"). By utilizing this television and Software, you agree to be bound by the terms of this License Agreement.
120 Mitsubishi DLP TMProjection Television Limited Warranty MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. ("MDEA") warrants as follows to the original purchaser of this television from an authorized MITSUBISHI Audio/Video Dealer, should it prove defective by reason of against defects arising from improper workmanship and/or material: a. Parts. The lenticular (i.e.
121 d. To obtain a replacement lamp during the warranty period, please contact the MDEA Consumer Relations Department at (800) 332-2119. After the warranty period you may order the lamp directly from the MDEA Parts Department at (800) 553-7278. 2. THIS LIMITED WARRANTY DOES NOT COVER: a. Up to .01% pixel outages (small dot picture elements that are dark or incorrectly illuminated). b.
122 Index index A A/V Discs 85 A/V Memory Reset. S_JcReset A/V Receiver Adding NetCommand Connecting 27 A/V Reset.
Index MP3 Audio 13, 14, 29, 32 and Memory Cards 57 Playback 56 Mute Audio and Closed Captions 66 and status Display 51 MUTE key 48 Video Mute 72 N NetCommand® A/V Receiver Control 43 and the Input Selection Menu 78 Compared to Programming the Remote Control 101 Description 13, 42 Initial Setup 42 IR Emitters 31 Menu 43, 62 Specialized Device Keys 41 Noise Reduction (Video) 74 P Parental Lock Bypassing 95 Front Panel Lock 68 V-Chip Ratings 71 Pass Code Resetting 95 Setting 68 PAUSE Key 48 and Memory Cards
MITSUBISHI ELECTRIC DIGITAL TELEVISIONS" Website: www, mitsubishi-tv, com E=mail: MDEAservice@mdea.com For questions, call Consumer Relations at 800=332=2119 To order replacement or additional remote controls, lamp cartridges, or Owner's Visit our website Guides at www.mitsuparts.com or call 800=553=7278 Demo Mode This TV has a demo mode for use in retail stores. Demo mode causes the TV to display a series of screens outlining the TV's features. To turn off demo mode: 1. 2. 3. 4. Press MENU.
