Manual

Part I1: Installation
Connecting an Antenna, Wall Outlet Cable, or Cable Box
Separate UHF and VHF Antennas
(Figure 1)
[] Connect the UHF and VHF antenna
leads to the UHF/VHF combiner.
[] Push the combiner onto ANT-A on the
TV back panel.
[] UHF/VHF combiners are not provided
with the TV. They should be available at
most electronic stores.
VHF A_enr_ UH_ An[anna
m
Figure 1. Connecting separate UHF and VHF antennas.
Twin Lead Antenna, Coaxial Lead
Antenna, or Wall Outlet Cable
[]
[]
For antenna with twin flat leads (Figure 2)
[] Connect the 300ohm twin leads to the
transformer.
Push the 75ohm side of the transformer
onto ANT-A on the TV back panel.
300ohm to 75ohm matching transform-
ers are not provided with the TV. They
should be available at most electronic
stores.
For cable or antenna with coaxial lead (Figure 2)
[] Connect the incoming cable to ANT-A on
the TV back panel.
30O Ohm _a_ 7_ Ohm
o_tio_l "1oo oF_t to 76 Ohm
M_tchin_ T_at_4_me
TV back panel
mm
® @
Figure 2. Connecting twin lead antenna, coaxial lead
antenna, or wall outlet cable.
Cable Box
(Figure 3)
[] Connect the incoming cable to ANT-B on
the TV back panel.
[] Connect two coaxial cables as follows:
[] One from LOOP-OUT on the TV back panel to
IN on the cable box back panel.
[] One from OUT on the cable box back panel to
ANT-A on the TV back panel.
TV backparte_
mm
cab'._-_ .,=cD H____@ @ @
[]
Cable Box
Figure 3. Connecting the cable box.