Owner’s Guide Projection Television Models WT-42315, WS-48315, WS-55315, WS-65315 and WS-65315A CABLE/DBS TV VCR DVD AUDIO 1 2 3 4 5 6 7 8 9 SQV 0 QV INPUT POWER SLEEP CHANNEL VOLUME VIDEO AUDIO MUTE ENTER HOME EXCH ADJUST CANCEL visit our website at www.mitsubishi-tv.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be sufficient magnitude to constitute a risk of electric shock.
Contents Important Notes ........................................................................................................... 6 Chapter 1 Television Overview Thank you ..................................................................................................................... 8 Unpacking your New TV............................................................................................... 9 Special Features...............................................................................
IMPORTANT SAFEGUARDS Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain the safety and operating instructions for future reference. Follow all operating and use instructions. 2. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions. 3.
IMPORTANT SAFEGUARDS, continued 12. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 13.
IMPORTANT NOTES Warning: Do not leave stationary PIP/POP, or letterbox images on the screen for extended periods of time. Mix the types of pictures shown. Uneven picture tube aging is NOT covered by your warranty. Important Notes The normal use of a TV should include a mixture of TV picture types. The most frequently used picture types should fill the screen with constantly moving images rather than stationary images or patterns.
Chapter . . . Television Overview Thank you .................................................................................... 8 Unpacking your New TV............................................................. 9 Special Features ......................................................................... 9 Front Control Panel................................................................... 10 Back Panel Input/Output ......................................................... 11 Important Notes ...........
Thank You for Your Purchase Thank You for Your Purchase Welcome to the wonderful and exciting world of digital television! We are honored that you chose Mitsubishi as your premier home entertainment partner. The development team at Mitsubishi Digital Electronics America (MDEA) understands that our customers demand and expect the very best. MDEA was founded on the core beliefs and philosophies that drive us to deliver products that implement the latest in advanced television technology.
Unpacking Your New TV Please take a moment to review the following list of items to ensure that you have received everything including: VCR DVD AUDIO 2 3 4 5 6 7 8 9 0 QV 1 SQV POWER SLEEP CHANNEL VOLUME INPUT VIDEO AUDIO MUTE ENTER HOME EXCH Your new High Definition (HD) upgradeable bigscreen television has many special features that make it the perfect addition to your home entertainment system.
Front Control Panel Many remote control buttons are duplicated on the front control panel. Duplicate buttons are shaded in the panels shown below. Please see Remote Control Functions, page 24, for an explanation of their usage.
Back Panel Input/Output for WS-48315, WS-55315, WS-65315 &WS-65315A Side Panel Input/Output for WT-42315 6 �������� ���� ����� TM MONITORLINK /DVI ������� WS-48315, WS-55315, WS-65315, WS-65315A Back Panel 3 2 4 COMPONE NT MONITOR OUT 1 INPUT 2 5 DTV(Y PbPr/ GBRH V ) 4 80 i / 480P/ 1080i 480 i / 480P /1080 i 2 1 � TM MONITORLINK RS-232C CONTROL 7 ����� ����� ������� ������ ����� � � ����� � Y G Y S-VIDEO Pb B Pb Pr AUDIOLEFT / (MONO) CAUTION: 1 AUDIOLEFT/ (MONO) AUDIORIGH
IMPORTANT NOTES Warning: Do not leave stationary PIP/POP, or letterbox images on the screen for extended periods of time. Mix the types of pictures shown. Uneven picture tube aging is NOT covered by your warranty. Important Notes The normal use of a TV should include a mixture of TV picture types. The most frequently used picture types should fill the screen with constantly moving images rather than stationary images or patterns.
Chapter . . . 2 Connections Connecting an Antenna or Wall Outlet Cable ............................ 14 Connecting an Antenna to a Cable Box or VCR ........................ 15 Connecting an Antenna to a Cable Box and VCR...................... 16 Connecting Audio/Video to a Cable Box or VCR....................... 16 Connecting an Audio Receiver .................................................... 17 Connecting a DVD Player or Other S-Video Device .................. 18 Connecting a DTV Receiver .............
Connecting an Antenna or Wall Outlet Cable Note: The TV back panel and connections shown here are for reference only and may vary by model. Separate UHF and VHF Antennas ������������� ���������������� ������������ ��������������� Connecting an Antenna or Wall Outlet Cable (Figure 1) 1. Connect the UHF and VHF antenna leads to the UHF/VHF combiner. �������������� ��������������� �������� ������� �������� 2. Push the combiner onto ANT-A on the TV back panel.
Connecting an Antenna to a Cable Box or VCR Note: The TV back panel and connections shown here are for reference only and may vary by model. Cable Box (Figure 3) ������������������������������� ��� � �� � �� � � � �������������� �� �� � � Connect two coaxial cables as follows: 2. One from LOOP-OUT on the TV back panel to IN on the cable box back panel. 3. One from OUT on the cable box back panel to ANT-B on the TV back panel.
Connecting an Antenna to a Cable Box and VCR, Connecting Audio/Video to the Cable Box or VCR Note: The TV back panel and connections shown here are for reference only and may vary by model. Contact your local cable or satellite provider or refer to the cable box or satellite Owner’s Guide for instructions on optimal connections to this TV.
Connecting an Audio Receiver Note: The TV back panel and connections shown here are for reference only and may vary by model. Stereo Audio System (Recommended for shelf units or A/V receivers without digital audio inputs) (Figure 7) �� ���� ����� �������� ������� 1. Connect the audio cables from AUDIO MONITOR OUTPUT on the TV back panel to TV IN or AUX IN terminals on the back of the audio system.
Connecting a DVD Player or Other S-Video Device Note: The TV back panel and connections shown here are for reference only and may vary by model. DVD Player with Component Video ��������� � �� � � � ���� ����� � � � Connecting a DVD Player or Other S-Video Device � � � (Figure 9) � �� 1. Connect the Component Video cables from (Y Cb Cr or Y Pb Pr) VIDEO OUT on the back of the DVD player to COMPONENT (1 or 2) on the TV back panel.
Connecting a DTV Receiver Note: The TV back panel and connections shown here are for reference only and may vary by model. Contact your local cable or satellite provider or refer to the cable box or satellite Owner’s Guide for instructions on optimal connections to this TV. DTV Connectors and Adaptors (Figure 11) or BNC to RCA Adaptor Adaptor Fitted to Connection BNC Connector RCA Connector Figure 11. DTV connectors and adaptors.
Connecting a DTV Receiver, continued Note: The TV back panel and connections shown here are for reference only and may vary by model. DTV Receiver with RGB Video Connections �� ���� ����� �������� ������� ������� �� ���� � ����� ���� � � � �� � � � ���� ����� ��� � � ���� ����� � � � � � � � � �� �� � � � �� �� � � � � � ����� � � � �� � � ����� (Figure 13) 1.
Connecting MonitorLink™/DVI MonitorLink/DVI WS-48315, WS-55315, WS-65315, WS-65315A back panel (section detail) (Figure 14) DTV( Y PbPr/ GBRH V ) TM MONITORLINK RS-232C CONTROL 480 i / 480P /1080 i 1 G Pb B 2 H Pr V R AUDIOLEFT/ (MONO) White 3 AUDIORIGHT MitsubishiHD-5000 receiver/controller back panel Red OUTPUTS TO AV RECEIVER INPUT 1 2 3 4 MONITOR TO DISPLAY PIP S-VIDEO VIDEO AC IN 3 White AUDIO LEFT AUDIO RIGHT IR OUTPUT NetCommand TM R MonitorLink CONTROL/RS-232 4
How Connections Affect the PIP (Picture-In-Picture) and POP (Picture-Outside-Picture) How Connections Affect the PIP (Picture-In-Picture) and POP (Picture-Outside-Picture) To see a picture in the PIP or POP, you may need to select an input source. If the only input connected is ANT-A, then both the main picture and the PIP/POP will be from that input source. If other video equipment is connected, you may be able to view these input sources as the PIP/POP.
Chapter . . . 3 Remote Control Functions Overview of the TV Layer Buttons .............................................. 24 Care and Operation ...................................................................... 25 Channel Selection......................................................................... 26 Sleep Timer ................................................................................... 26 Use With Other A/V Products......................................................
Remote Control Functions: Overview of the TV Layer Buttons Remote Control Functions: Overview of the TV Layer Buttons Overview 19. PIP INPUT: Select the PIP or POP input source. (Figure 1, following page,) 1. Slide Switch: Select A/V product to be controlled by the remote control. 2. Numbers: Individually select channels or input information into TV. 3. POWER: Turns power on and off for TV and other connected A/V products. 4. SQV (Super Quick View™): Scan through a memorized list of favorite channels.
Remote Control Functions: Care and Operation Operation Installing the Batteries: (Figure 2) CABLE/DBS/DTV TV 2. Load the batteries, making sure the polarities (+) and (-) are correct. For ease of installation, install the negative (-) side first. DVD AUDIO 1 2 1 2 3 4 5 6 7 8 9 4 0 QV SQV INPUT POWER 3 SLEEP 6 5 CHANNEL VOLUME 7 8 VIDEO 10 AUDIO 11 9 MUTE For Best Results from the Remote Control: 12 31 ENTER HOME 13 Be within 20 feet of the equipment.
Remote Control Functions: Channel Selection, Sleep Timer Remote Control Functions: Channel Selection, Sleep Timer Channel Selection Enter three numbers ( ex. for channel 2, press 002). CABLE/DBS/DTV TV 1 2 VCR DVD AUDIO 3 or Press the channel number and ENTER (ex. for channel 2, press 2, then ENTER). POWER or 4 5 6 7 8 9 SQV 0 QV SLEEP Figure 3. Sleep button on remote control Enter the channel number and wait four seconds (without pressing ENTER). The TV will change automatically.
Use of the Remote Control with Other A/V Products Programming the Remote Control to Use with Other Brands of Audio and Video Products: (Figures 1-4 this page, Figure 5, following page) 1. Move the slide switch at the top of the remote to the product you want to control. 3. Enter the first three digit code listed for your equipment, and then release the POWER button on the remote control. 4. Point the remote control to the equipment and press the POWER button.
Use of the Remote Control with Other A/V Products, continued Use of the Remote Control with Other A/V Products, continued CABLE/DBS/DTV VCR DVD AUDIO TV 1. 3. Audio brand 2.
Remote Control Functions: Special Functions When your remote control has been Programmed to operate another manufacturer’s product, the function performed on each layer may vary.
IMPORTANT NOTES Warning: Do not leave stationary PIP/POP, or letterbox images on the screen for extended periods of time. Mix the types of pictures shown. Uneven picture tube aging is NOT covered by your warranty. IMPORTANT NOTES The normal use of a TV should include a mixture of TV picture types. The most frequently used picture types should fill the screen with constantly moving images rather than stationary images or patterns.
Chapter . . . 4 Menu Screen Operations The ViewPoint® Menu System .................................................... 32 MAIN Menu .................................................................................. 33 SETUP Menu.................................................................................. 35 CAPTIONS Menu ........................................................................... 40 CHANNEL EDIT Menu...................................................................
The Menu System Mitsubishi’s exclusive choices and changes. on-screen operating system provides on-screen information for menu A picture (icon) will be highlighted and can be selected using the remote control’s ADJUST arrows. Menu System When selected, the appropiate menu will appear or start an automatic function. You may then make changes within the menu or access available submenus. A highlighted square button indicates that you may make changes to the menu screen.
Main Menu Screens: Overview SETUP Menu ���� ���� (Figure 3) ����� ���� �������� �������� � ��� � ��� ����� ���������� Basic (initial) setup instructions and functions are available through the SETUP submenu screens. Use this menu when you relocate the TV, experience a power loss or when devices are added after initial setup.
Main Menu Screens: Overview, continued V-CHIP LOCK Menu ���� ���� (Figure 6) Main Menu Screens: Overview, continued Lock the TV by selecting times or choosing programs to block based on rating signals sent by your local broadcasting system. Note: For WS-48315, WS-55315, WS-65315 or WS-65315A set the Front Button Lock at this screen. See pages 46-49 for detailed setup information. See page 45 for V-Chip rating information.
SETUP Menu: Memorize Channels, Memorize Menu, Input Assignment (Figure 9) ����� ���� �������� �������� � ��� � ��� Select Memorize Channels for each antenna you use. The TV will find and remember strong channels and skip the unused or weaker channels. ����� ���������� ����� �������� �������� � ������� ������ ���� � �������� ������ �� ������ ����� ��� ���� �� ������ ������ ���� �� ������ MEMORIZE Menu (Figure 10) Figure 9.
SETUP Menu: Manually Setting the Clock Clock Setting (Manual) ���� ���� ����� ���� (Figure 12) SETUP Menu: Manually Setting the Clock ����� ���� ����� ������� � ������ ����� ���� � ����� �� ��� ��� � ������ ���� ���� � ������� �������� ������� ���� � ������� The Clock Setting menu default allows the clock time to be set manually. To set the clock automatically, please see page 37. To set the clock manually, first select the current time, including AM or PM.
SETUP Menu: Automatically Setting the Clock ���� ���� ����� ���� Clock Setting (Auto) (Figure 14) ����� ���� ����� ������� � ���� ����� ���� � ����� �� ��� ��� � ������ ���� ���� � ������� �������� ������� ���� � ������� ������ �� ������ ���� �� ������ �� ������ ������ Figure 14.
SETUP Menu: Language, Front Button Lock (WT-42315) Language SETUP Menu: Language, Front Button Lock (WT-42315) ���� ���� (Figure 17) ����� ���� �������� �������� � ��� � ��� ����� ���������� ����� �������� �������� � ������� ����� ������ ���� � ��� ������ �� ������ ����� ��� ���� �� ������ ������ ���� �� ������ Display the on-screen menus in either English or Spanish (Español). The first time you powered On your TV, you were requested to select an on-screen menu language.
SETUP Menu: Energy Mode (WS-48315, WS-55315, WS-65315, WS-65315A) ���� ���� (Figure 19) This feature is only for models WS-48315, WS-55315, WS-65315 and WS-65315A. Change the setting to Low (less than 1 watt) and the TV will operate in an energy saving mode when it is turned off. ����� ���� If the Energy Mode is set to Low, it will not be possible to record while the TV’s power is off. There will be no signal from LOOP OUT (on the TV back panel) to the VCR and/or cable box.
CAPTIONS Menu: Overview CAPTIONS Menu ���� ���� (Figure 20) ����� ���� ������ �������� � �� �� ���� �� ���������� � ���� Turn On or Off the closed caption decoder, select the type of captions or text, and choose black or translucent gray as the background color for the closed caption area. CAPTIONS Menu: Overview Broadcasters can send either Standard or Text closed captioning.
CAPTIONS Menu: Closed Captions, Background Color Closed Captions ���� ���� (Figure 21) CC1, CC2, CC3, or CC4: Standard closed captioning signals. ����� ���� ������ �������� � �� �� ���� �� ���������� � ���� Text1, Text2, Text3, or Text4: Text closed captioning signals. On if mute: Closed captions when mute. When selected, the standard closed captioning signal (CC1) will turn on/off by pressing the MUTE button on the TV remote control. Off: No closed captions.
CHANNEL EDIT Menu: Antenna, Channel Selection Antenna ���� ���� (Figure 23) CHANNEL EDIT Menu: Antenna, Channel Selection ������� ���� ���� ������� � ��� � ������� � ��� ������ � ����� ���� � ���� ��� � ���� ��� ������ �� ������ ����� �� ������� �� ������ ������ ������ �� ������ Select Ant-A or Ant-B. For each antenna, you can add or delete channels in memory, name channels, and add channels to the SQV (Super Quick View™) list. Figure 23.
CHANNEL EDIT Menu: Memory, Name Selection Memory ���� ���� ������� ���� ���� ������� � ��� � ������� � ��� ������ � ������� ���� � ��� ��� � ��� ������ �� ������ ����� �� ������� �� ������ ������ ������ �� ������ Figure 25. Memory Name (Figure 26) Name channels shown on Ant-A or Ant-B (up to four characters). After you enter a name, it will appear on the TV screen next to the channel number. 1. Select Ant-A or Ant-B. 2. Select the memorized channel you want to name. 3.
CHANNEL EDIT Menu: Using SQV (Super Quick View™ ) Using The Menu Screen CHANNEL EDIT Menu: Using SQV (Super Quick View™ ) ���� ���� (Figure 27) ������� ���� ���� ������� � ��� � ������� � ��� ������ � ����� ���� � ���� ��� � ���� ��� ������ �� ������ ����� �� ������� �� ������ ������ ������ �� ������ Figure 27. SQV (Super Quick View™) � � � � � � � � � ��� � �� Put together a list of your favorite channels from Ant-A and Ant-B using SQV (Super Quick View).
V-Chip Lock Menu: Overview V-Chip Signal Information When provided by the broadcaster, V-Chip ratings can be used to control which programs can be viewed or will be blocked. When V-Chip ratings are sent, you will see the ratings when you change the channel or when you press the INFO button on the remote control. Both TV and Movie ratings will display. TV ratings apply to programs and movies developed for TV and may have supplemental blocking by content categories.
V-CHIP Menu: Setting Up and Using V-Chip Lock Passcode V-CHIP Menu: Setting Up and Using V-Chip Lock Passcode Setting Up the V-CHIP LOCK Passcode ���� ���� ������ ���� ���� (Figure 29) ������ ���� �� �� �� ��� ����� ����� � ��� ��������� � � � � ��� ��� ������ �������� ���� ����� ������ Figure 29. First time entry to the V-CHIP LOCK all models ���� ���� ������ ���� ���� Select V-CHIP LOCK from the MAIN menu for first time setup or after you have canceled your passcode.
V-CHIP Menu (WT-42315): Allowing or Blocking Ratings, Locking by Hour or Time Allowing or Blocking by Ratings ���� ���� Block or Allow programs based upon rating signals sent by the broadcasting station. The factory preset for TV Ratings is TV-PG (Parental Guidance) allowing only programs rated TV-PG or lower. The factory preset for Movies is PG, allowing only movies rated PG or lower. Please refer to page 45 for a detailed ratings description.
V-CHIP Menu (WS-48315, WS-55315, WS-65315, WS-65315A) : Locking by Time, Front Button Lock,V-Chip Rating Menu ���� ���� LOCK by Time (Figure 33) V-CHIP Menu (WS-48315, WS-55315, WS-65315, WS-65315A) : Locking by Time, Front Button Lock,V-Chip Rating Menu ������ ���� ���� ���� �� ���� � ��� ���� ���� � ����� �� ������ ���� � ����� �� ����� ������ ���� � ��� Select On at Lock by Time, then select the Lock Time and Unlock Time. This will lock the entire TV.
V-CHIP Menu (WS-48315, WS-55315, WS-65315, WS-65315A ) : Allowing or Blocking Ratings, Lock by Time Allowing or Blocking by Ratings ���� ���� ������ ���� Block or Allow programs based upon rating signals sent by the broadcasting station. The factory preset for TV Ratings is TV-PG (Parental Guidance) allowing only programs rated TV-PG or lower. The factory preset for Movies is PG, allowing only movies rated PG or lower. Please refer to page 45 for a detailed ratings description.
ADVANCED FEATURES Menu: Color Balance, Auto Color Correction, PerfectColor ™, Reset Color Color Balance Menu ���� ���� ADVANCED FEATURES Menu: Color Balance, Auto Color Correction, PerfectColor ™, Reset Color (Figure 38) The Color Balance Menu uses six colors (Magenta, Red, Yellow, Green, Cyan and Blue). You may adjust the intensity of these colors automatically or manually or reset them to the default settings.
ADVANCED FEATURES Menu: TIMER, Timer Menu, and Set Time (Figure 41) The timer will automatically turn the TV on (if it is off) at the time you schedule and select. When Ant-A or Ant-B is the selected input, you may select any memorized channel. The TV will tune to this channel when the timer turns it on. ���� ���� �������� �������� ���� ����� ������� ����� ����������� The TV’s clock must be set before you can set the timer.
ADVANCED FEATURES Menu: Set Day, Input, and Channel ADVANCED FEATURES Menu: Set Day, Input, and Channel ���� ���� �������� �������� ���� Set Day (Figure 44) ����� ���� ����� � ��� ��� ���� � ����� �� ��� ��� � �������� ����� � ����� ������� � ��� Select the days that the TV will turn on automatically. You can select Everyday, Mon-Fri (Monday through Friday), or the individual days of the week. ������ �� ������ �� ������ ������ ���� �� ������ Figure 44.
ADVANCED FEATURES Menu: CONVERGENCE CONVERGENCE Menu (Figure 47) ����������� ���� ��� ����������� ���� ����������� During production, your TV was carefully adjusted to properly align these colors. However, moving the TV, the TV’s location in relation to the Earth’s magnetic poles, and the passage of time can cause these adjustments to change. As a special feature, you have the ability to adjust the red and blue light beams in reference to the fixed green light beam. This process is called convergence.
ADVANCED FEATURES Menu: Reset Convergence, Video Mute, Black Enhancement ���� ���� �������� �������� ���� ADVANCED FEATURES Menu: Reset Convergence, Video Mute, Black Enhancement ����������� ���� �������� ����� ����������� �� ������� ��������� ��� ������ ������� �� ��� ��� ���� ����������� ��� ������� ����������� ���� �� �������� ����� ����� �� ����� ����������� �� ��� ��������� ����� ���� �� ������ �� ��� ���� ������� ��������� ������������ Figure 50.
AUDIO/VIDEO SETTINGS Menu: Overview AUDIO/VIDEO SETTINGS Menu ���� ���� (Figure 53) ����������� �������� ���� �� ������ ����� � ��� � A/V Memory Reset �� ������� ���������� � �� ����� ������ ��� ������ �������� � �������� A/V Memory Reset will return the currently selected input’s A/V memory to the factory settings. To reset an input’s A/V memory, select A/V Memory Reset, select the input you want to reset, and press ENTER.
AUDIO/VIDEO Setting Descriptions: Audio Audio Settings AUDIO/VIDEO Setting Descriptions: Audio Bass Enhances or reduces low frequency sound. Treble Enhances or reduces high frequency sound. Balance Adjusts the level of sound between the left and right speakers. Surround Creates simulated stereo and surround effects. Your choices are: • Off: No surround effects. Use this setting when using an A/V receiver with Dolby™ Pro Logic Surround, or Dolby™ Digital Surround.
AUDIO/VIDEO Setting Descriptions: Video Video Settings • Adjust your video settings (specifically sharpness) for optimal picture performance. • Use the Convergence Menu (page 53) to properly align the TV. • Change the format size (pages 60-61). Contrast Provides a slider to adjust the white-to-black level. Low contrast shows a variety of shades in darker images, while high contrast shows darker images more uniformly black and makes colors appear more vibrant.
This page intentionally blank 58
Chapter . . . 5 PIP/POP Operations Available On-Screen Format Sizes ........................................... 60 Operation of PIP and POP............................................................ 62 Appendix A: Bypassing the V-Chip Lock.................................... 63 Appendix B: HD Input Connection Compatibility ...................... 65 Appendix C: Remote Control Programming Codes .................. 66 Appendix D: Cleaning and Service .............................................
Available On-Screen Format Sizes ������ �������� ������ ������������ ����� �� ������������ ������ �������� ����� ��� ����� ��� ��� ����������� ��� ������� ������� ������� ������� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ����������� �� � ����������� ����������� �� � ������� Available On-Screen Format Sizes ��� ����������� ��� ������� ������ ��������� ��� ��� ��� �� ��� ��� ��� ��� �� ��� �� ������ �� ���� ����� �� �� �� ��� �� �� �� �� ��� �� ��� ��� ��� ��� �� ��� ��� ��� ��� �� ��� �� ����
Available On-Screen Format Sizes, continued Widescreen Picture (16:9 - HD 1080i only) Example: A True HD Broadcast Expand (Recommended for 4:3 images with Black Side Bars) Widescreen Picture (480i/480p) Standard (Recommended) Expand Zoom (For letterbox 2.
Operation of PIP and POP Picture Inside Picture (PIP) vs. Picture Outside Picture (POP) You have the option to view two TV shows or inputs at the same time. For example, you can watch a game show and a sports event on another channel, or a DVD movie and more. The PIP option allows you to view another input as a picture-inside-picture. The POP option allows you to view a main picture and another input as a side-by-side or three or nine pictures-outside-picture at the side (only one moving POP).
Appendix A: Bypassing the V-Chip Lock Bypassing the V-Chip Lock After you set the lock, you need your passcode to view a V-Chip locked program, view the locked TV, cancel the lock, or enter the V-Chip lock menus. When entering the V-Chip Lock menu, this process deletes your old passcode and prompts you to enter a new passcode. Cut along the dotted line and file bypass instructions in a safe place for future reference.
This page intentionally blank 64
Appendix B: High Definition Input Connection Compatibility Input Levels with Component Video These inputs are compatible with most standard DVD and DTV signals with component video outputs. Compatible DTV signals are SDTV 480i, 480p, and HDTV 1080i. Y = 1.0Vp-p (includes sync) 75ohms Pb = 700mVp-p, 75ohms (can also receive signals from outputs labeled B-Y and Cb) All other DTV signals, such as 720p, need to be converted by the DTV receiver (or compatible device) to one of the compatible signal types.
Appendix C: Remote Control Programming Codes Appendix C: Remote Control Programming Codes A/V Receivers Mitsubishi ................ 010, 011, 012, 013, 014, 360 Admiral ..................... 220 Aiwa.......................... 225, 226, 241 B & K ........................ 352 Bose......................... 351 Denon ...................... 234, 235, 236, 245, 246, 359, 361 Fisher ....................... 204 Gerrard..................... 213 Harman Kardon ....... 215, 223, 242, 362 Jensen......................
Appendix C: Remote Control Programming Codes, continued MitsubishiHD/Satellite Receiver ................... 006, 173 Echostar/ Dishnetwork............. 175, 82, 183, 188 Express Vu............... 175 GE ............................ 176 Gradient ................... 186 Hitachi...................... 173, 181, 184 Hughes..................... 173 Maganavox .............. 171, 172 Panasonic ................ 174 Philips ...................... 171, 172 RCA/Proscan........... 176, 179, 180,185 Samsung..............
Appendix D: Cleaning and Service Cleaning Appendix D: Cleaning and Service Normally, light dusting with a dry, non-scratching duster will keep your TV clean. If cleaning beyond this is needed, please use the following guidelines: • If necessary, you can vacuum using the brush and hose attachments of your vacuum cleaner. Do not use the beater brush section on the grill cloth. First, turn off the TV and unplug the power cord General Cleaning Warnings: from the power outlet.
Appendix E: Diamond Shield™ Installation and Removal for WS-48315, WS-55315, WS-65315 and WS-65315A Installation: A. Begin by inserting the shield, sliding it into the channels, starting at the bottom. Gently bow the Diamond Shield toward you and insert the Diamond Shield into the top channel. B. Install the left and right molding clips by pressing them into the opening starting at a corner. Do not force the clip. The clip will slide into place. This completes the Diamond Shield installation.
Cabinet Separation for WS-65315 and WS-65315A This TV is very heavy! Exercise extreme care when moving TV as foreign material may become embedded in the castor wheels which could damage wood or other delicate flooring.
Terminal Cover Ventilation for Model WT-42315 Stand Requirement Wall CAUTION: This PTV for use only with Mitsubishi stand MB-42413. Use with other stands may result in instability causing possible injury. When considering the location or position of your TV, we recommend you place it at least 2” (inches) away from the wall. Like most electrical equipment and appliances, better air circulation allows your television to run cooler, assuring a long, trouble-free life.
Index A A/V Index Memory Reset 55 Receiver, Connecting 17 Activating the PIP and POP 29 Advanced Convergence Menu 53 Advanced Features Menu 34, 50-54 Antenna Channel Edit Menu 42 Connecting 14, 15 Appendices A: Bypassing the V-Chip Lock 63 B: High Definition Input Connection Compatibility 65 C: Remote Control Programming Codes 66 D: Cleaning and Service 68 E: Diamond Shield™ Installation and Removal for Models WS-48315, WS-55315, WS-65315, WS-65315A 69 Audio/Video Settings Menu 34, 55 A/V Memory Reset 55
Lock by Time for WS-48315, WS-55315, WS-65315, WS-65315A 48 WT-42315 47 Lock Time for WT-42315 47 M Main Menu Screens: Overview 32 Memorize Channels Menu 35 Memorize Menu 35 Memory Menu 43 Menus (also see individual topic) Advanced Features 50 Audio/Video Settings 55 Captions 40 Channel Edit 42 Main 32 Setup 35 V-Chip Lock 45 MonitorLink, Connecting 21 Moving PIP Images 62 N Name Menu 43 PerfectColor™ 50 PIP and POP Activating 29 Changing 62 Freezing 62 How Connections Affect 22 Operation 62 POP “Live” I
Troubleshooting Troubleshooting Problem Possible Solution 1. • The TV remote control does not work. • Check that the batteries are installed correctly. • Check that the selected switch is set to “TV”. • Be no further than 20 feet from the TV when using the remote control. 2. • The TV takes several seconds to respond to channel commands. • Press ENTER after a channel number to avoid delays. • Use the three digit number, i.e 002 for channel 2. 3. • You cannot access a channel.
If you have questions that cannot be answered from this book, please call our Consumer Relations advisors at (800) 332-2119 or send an email to: MDEAservice@mdea.com To order replacement remote controls or an Owner’s Guide, please call our Parts Department at (800) 553-7278 or contact us through our web site at: www.Mitsubishi-tv.com ©2003 Mitsubishi Digital Electronics America, Inc. 871D404B10 Written and Printed in the U.S.A.
