Operation Manual

EN-38
ITEM SETTING FUNCTION
LAMP 1 TIME RESET OK The LAMP 1 operation time is reset to 0.
LAMP 2 TIME RESET OK The LAMP 2 operation time is reset to 0.
RESET ALL OK The menu settings are reset to the factory defaults (except the
LANGUAGE, PASSWORD FUNCTION, IMAGE CAPTURE, SCREEN,
and NETWORK settings).
• CINEMAMODEcanbeadjustedonlywhenaTV60,TV50,480i,576ior1080isignalisbeingdisplayed.
• WhenSCARTINPUTissettoON,normalcomputersignalsaren’t projected.
• UseacommerciallyavailableSCART-MiniD-SUB15-pincablewhenconnectingthisprojectorwithanAVdeviceequipped
with the SCART terminal.
• SomeAVdevicesequippedwiththeSCARTterminalaren’t compatible with this projector.
• TheRESETALLprocessmaytakesometimetocomplete.
• YoucannotcarryoutRESETALLforapprox.2minutesafterthelampswitchingorthelamprelayoperation.
FEATURE menu (continued)
Menu operation (continued)