Extra Information

EN-11

4. Projector registration

Procedure B - Connection example 3 (where projectors are installed via a router)

To automatically detect projectors connected via a router, conﬁrm the IP address in the projector network menu

and specify a range of IP addresses to search that particular IP address using “Search Projector Setting”.

<Note>

If you want to connect a projector via a router after automatically detecting it, you need to specify a search range

of IP addresses that includes the projector's IP address in advance.

(1) Start up “ProjectorView Global+”.

(2) Select “Search Projector Setting” from “Conﬁguration” of the menu bar.

• “SearchProjectorSetting”windowisdisplayed.

 



Item Description

 Start IP Address Specify the IP address that is the start of the search range.

  (YoucannotspecifyanIPaddressthatcontainsarangeotherthan1to254for

the ﬁrst and last octets and a range other than 0 to 255 for the second and third

octets.)

 EndIPAddress SpecifythelastoctetoftheIPaddressthatistheendofthesearchrange.(You

cannot specify a value that contains a number other than 1 to 254. In addition,

you cannot specify a value that is smaller than the last octet of the search start IP

address speciﬁed in step .)

 Search Projector The settings you made are saved and then the automatic projector search is

performed.

(3) Specify the projector search range by IP address ( and ).

• Upto16searchrangescanbeset.(Settingscanbeconguredforeachlineofthesearchrange.)

(4) To save the settings, click [Save]. To continue the projector search, click [Search Projector].

• Whenyouclick[Save],thesearchrangesyouspecifyaresavedandthe“SearchProjectorSetting”window

is closed.

• Whenyoudon'twanttosavethesearchranges,click[Cancel]toclosethe“SearchProjectorSetting”

window.

• Aftersavingthesettings,byselecting“Conguration”onthemenubarandthenselecting“Search

Projector”, you can perform automatic projector search within the search ranges you saved.

• Someprojectorsmayrequireyoutoenterthepasswordwhenestablishingprojectorconnectionsforthe

ﬁrst time. Authentication is automatically performed from the second time onwards unless projectors are

deleted from the list.