Operation Manual

EN-34
FEATURE menu
FEATURE
ADVANCED MENU
SETUP
SCART INPUT
AUTO
AUTO
OFF
STANDARD
OFF
VIDEO SIGNAL
LAMP WARNING
HIDE OSD
opt.
LANGUAGE
ADVANCED MENU
FEATURE
ASPECT
PROJECTOR ID
NORMAL
AUTO
English
ALL
DISPLAY INPUT
ENTER
CINEMA MODE
PASSWORD FUNCTION
MENU POSITION
opt.
A
Ë
RESET ALL
OK
1.
STANDARD
HIGH ALTITUDE MODE
ITEM SETTING FUNCTION
ASPECT NORMAL Select to change the aspect ratio automatically depending on the
input signal. (Select this option for normal use.)
16:9
Select to expand squeezed (or horizontally compressed) images
such as DVD images to 16:9. Press the ENTER button to make
further settings such as positioning of the displayed image and
selection of signals expanded by this function. (See page 29.)
FULL Select to project images in full size (1024 x 768 pixels) irrespective
of type of input signal.
PROJECTOR ID ALL Select this option to control the projector regardless of the ID
number. (See page 10.)
01 to 63 Use to set the ID number (two-digit number). (See page 10.)
PASSWORD FUNCTION DISPLAY INPUT
/
MENU ACCESS
/
SPLASH ID SCREEN
Use to enable or cancel the password lock. See page 49 for details.
MENU POSITION 1 (upper left) / 2 (lower right) Use to change the position of the menu.
CINEMA MODE AUTO The film mode will be automatically activated when a film source
signal is input.
Select AUTO for normal use.
When flicker occurs on the screen, frame dropping or other incorrect
display occurs, or jaggies on slanting lines are remarkable, select
either FILM or VIDEO, which improves the symptom better.
FILM Fixed to the film mode.
VIDEO The film mode will not be activated.
LANGUAGE
/ English / Español /
Deutsch / Français / Italiano /
/ / /
PORTUGUÊS / SVENSKA /
POLSKI / Nederlands/ Norsk /
/ Türkçe /
ѓѥќѥѳъѕ
/
Bahasa Indonesia / Melayu /
Use to select the language used in the menus.
HIGH ALTITUDE MODE STANDARD Select this option for normal use.
HIGH ALTITUDE
Select this option for use at an altitude of 1500 to 2700 meters
above the sea level.
Menu operation (continued)