Operation Manual

EN-37
NETWORK menu
NETWORK
IP CONFIG
opt.
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
0. 0. 0. 0
MAC ADDRESS
SAVE SETTINGS
ON
0. 0. 0. 0
OK
CONTROL SYSTEM
NETWORK
PASSWORD
NETWORK
NETWORK
CERTIFICATION
PROJECTOR NAME
IP CONFIG
NETWORK RESET
opt.
STANDARD
ENTER
ENTER
OK
NETWORK RESTART
OK
ON
0. 0. 0. 0
ITEM SETTING FUNCTION
PROJECTOR NAME *****...
Set the name to identify the projector. Enter up to 15 characters
(alphabets or numeric characters). (See page 44.)
NETWORK CERTIFICATION
ON
/ OFF
Select whether to enable the network certification or not. Select ON
for normal use. (See page 44.)
NETWORK PASSWORD ENTER
Set the password for Web control or PJLink™ certification. (See page
44.)
IP CONFIG ENTER Select this setting for IP Configuration. (See page 45.)
DHCP
ON
Select this setting when you obtain IP CONFIG automatically by
DHCP server.
OFF
Select this setting when you set IP CONFIG manually.
IP ADDRESS ***.***.***.***
Press the ENTER button to set IP ADDRESS. When DHCP is set to
ON, you cannot change this setting.
SUBNET MASK ***.***.***.***
Press the ENTER button to set SUBNET MASK. When DHCP is set to
ON, you cannot change this setting.
DEFAULT GATEWAY ***.***.***.***
Press the ENTER button to set DEFAULT GATEWAY. When DHCP is
set to ON, you cannot change this setting.
MAC ADDRESS xx-xx-xx-xx-xx-xx Displays MAC ADDRESS.
SAVE SETTINGS OK Saves the IP CONFIG settings. When the IP CONFIG is not changed,
you cannot select SAVE SETTINGS.
CONTROL SYSTEM STANDARD
Select this setting when using ProjectorView Global+ or ProjectorView.
(See pages 46 and 51.)
AMX Select when using a controller made by AMX. (See pages 46 and 51.)
CRESTRON Select this setting when using the controller or software of Crestron
Electronics, Inc. (See pages 46 and 51.)
NETWORK RESET OK
Resets the Network Setting. (See page 47.)
NETWORK RESTART OK
Press the ENTER button to restart the network function.
Menu operation (continued)