Operation Manual

EN-41
Adjusting the fineness of the image (SUPER RESOLUTION):
You can adjust the fineness of the image using the menu.
(See page 31 for menu setting.)
With the IMAGE menu:
1. Display the IMAGE menu.
2. Select SUPER RESOLUTION by pressing the  or  button.
3. Press the  or  button to select ON
.
4. Press the ENTER button.
5. Make adjustment using the  or  button.
Important:
t When you make SUPER RESOLUTION adjustment, the colors of the menu may be obscured, but this is not a
failure.
t You can adjust SUPER RESOLUTION also by pressing the SUPER RESOLUTION button on the remote control.
With the remote control:
1. Press the SUPER RESOLUTION button on the remote control.
A window for SUPER RESOLUTION adjustment appears on the upper right of the screen.
2. Press the  or  button to select ON
.
3. Press the ENTER button.
4. Make adjustment using the  or  button.
Adjusting the tone of each color (NCM):
You can adjust the tone of each color using the menu.
(See page 31 for menu setting.)
1. Display the IMAGE menu.
2. Select NCM by pressing the  or  button.
3. Press the  or  button to select USER
.
4. Press the ENTER button.
5. Select an item you want to set using the  or  button.
t *GZPVXBOUUPBEKVTUUIFTBUVSBUJPOPGBMMDPMPSTPGUIFJNBHFTFMFDU
SATURATION.
t *GZPVXBOUUPBEKVTUUIFCBMBODFPGBMMDPMPSTPGUIFJNBHFTFMFDU3(#5*/5
6. Press the  or  button to adjust the color balance of the selected color.
7. Repeat steps 5 and 6 for optimum adjustment results.
t When the input signal is VIDEO or COMPUTER, the items in the NCM-USER menu are automatically set to the
predetermined values. You can change these values manually.
t To cancel the NCM-USER menu, select OFF in step 2.
t When you make NCM adjustment, the colors of the menu will change, but this is not a failure.
Adjusting projected images (continued)
SUPER RESOLUTION
ON
SUPER RESOLUTION
LEVEL 1
NCM
COMPUTER
NCM−USER
RED
YELLOW
GREEN
CYAN
0
0
0
0
BLUE
MAGENTA
SATURATION
0
RGB-TINT
0
0
0