User's Manual

ManualsBrandsMitsumi Electric ManualsElectronicsRFID Product

Nintendo 3DS NFC Reader/Writer

Operations Manual

This accessory is only for use with Nintendo 3DS or Nintendo 3DS XL

systems.

NOTE: Before using an amiibo™ or other NFC-supported devices with this accessory, read

the Nintendo 3DS/Nintendo 3DS XL Operations Manual, the instructions for the amiibo or

other NFC-supported device, and the intructions for the game you are playing for information

on using these products.

Be sure to carefully read Health and Safety Information and Usage Guidelines in the

Nintendo 3DS or 3DS XL Operations Manual. Failure to do so may result in injury or damage

to your system. If this product will be used by young children, this manual should be read

and explained to them by an adult.

Also read the built-in Health and Safety information on your system by tapping

when

the HOME Menu is displayed on the Touch Screen.

Components

Battery Cover

NFC area

Touch an NFC-supported device

to read or write data (when

using compatible software).

Infrared transceiver

Sends and receives informtion

using infrared communication.

Power LED

POWER Button

Installing Batteries

NOTE: A parent or guardian should install or replace the batteries if a child is using

this product.

This accessory uses 2 AA alkaline batteries.

Remove the battery cover and insert the batteries negative end first, as shown in the

illustration. When replacing the batteries, remove the positive end first.

When installing the battery cover, insert the edge with the two tabs first and then press the

cover into its recess until it clicks into place.

NOTE: Battery life will vary depending on the frequency of communication and the operat-

ing environment, such as temperature.

Usage Instructions

Make sure wireless communication is enabled on the Nintendo 3DS system. Place your

Nintendo 3DS system and the reader/writer on a flat, level surface.

Follow the on-screen instructions for the game you are playing and touch an amiibo or other

NFC-supported device to the NFC area. This will allow data to be written or read.

NOTE: The Nintendo 3DS/Nintendo 3DS XL system may need a system or software update in

order to use the NFC reader/writer.

Press the POWER Button.

The power indicator LED will turn on blue.

• The LED will turn red when the battery power is

getting low.

• The accessory will turn o automatically after 5

minutes of inactivity.

Orient your system to the reader/writer as shown below.

The power indicator LED will blink when the NFC reader/writer is correctly facing the

Nintendo 3DS infrared transceiver and communicating with the system.

Nintendo 3DS system

7.5” (20cm) or less.

NFC Reader/Writer

Troubleshooting

If this accessory fails to operate correctly, check the following conditions before seeking

assistance. If it still does not operate correctly after trying the troubleshooting steps, visit

support.nintendo.com for assistance and additional troubleshooting and repair options or

call 1-800-255-3700.

The accessory does not turn on:

• Make sure the batteries are installed correctly.

• Make sure the batteries are not depleted.

Unable to read or write data:

• Make sure the software you are using supports NFC devices. Check the game

packaging and look for this icon for support of this feature:

• Make sure that your system has wireless communication enabled and that your system

and the reader/writer are oriented correctly and placed the correct distance from each

other.

• Make sure you are correctly using the NFC-compatible product with the software. Review

the instructions for the software you are using for details on using NFC-compatible

products.

• Make sure you are touching the NFC-compatible product to the center of the NFC area. Do

not move the NFC-compatible product while writing or reading data.

• Make sure you are using the correct NFC-compatible product with the software you are

using. Visit support.nintendo.com/3ds/amiibo for more information.

• Make sure that there is nothing inferfering with infrared communication, such as direct

sunlight or other sources of stong light, heat, or electromagnetic energy.

• Make sure the IR transceivers are not dirty. Clean with a soft cloth if necessary.

NOTE: After infrared communication is inactive for a certain period of time (5 minutes after

turning the power on or approximately 90 minutes after finishing communication), the

power will automatically turn off.

Summary of content (3 pages)

PAGE 1
Usage Instructions Nintendo 3DS NFC Reader/Writer Operations Manual Make sure wireless communication is enabled on the Nintendo 3DS system. Place your Nintendo 3DS system and the reader/writer on a flat, level surface. Follow the on-screen instructions for the game you are playing and touch an amiibo or other NFC-supported device to the NFC area. This will allow data to be written or read.
PAGE 2
Orientez votre console vers le lecteur/enregistreur comme indiqué ci-dessous. Lecteur/enregistreur CCP Nintendo 3DS Le témoin d’alimentation clignote lorsque le lecteur/enregistreur CCP est placé correctement face au port infrarouge de la console Nintendo 3DS et qu’il communique avec celle-ci. Mode d’emploi Cet accessoire peut seulement être utilisé avec les consoles Nintendo 3DS et Nintendo 3DS XL.
PAGE 3
Renseignements sur l’entretien et la garantie Warranty and Service Information You may need only simple instructions to correct a problem with your product. Try our website at support.nintendo.com or call our Consumer Assistance Hotline at 1-800-255-3700, rather than going t o your retailer. Hours of operation are 6 a.m. to 7 p.m., Pacific Time, Monday - Sunday (times subject to change).