Product Description

ManualsBrandsMitsumi Electric ManualsElectronicsRF Module

( 1 ) / ( 5 )

2019.2.7

Contents

page

Sub-GHz Radio Narrowband Interface (USA

）

Block diagram

GPS capabilities

Technical specifications

Mechanical and Environmental

Architecture

Product description

This Product Standard shall be applied to the RF Module (DRT-W031).

TakeoTsuchida

MANUAL

APPROVED BY

CHECKED BY

WRITTEN BY

DRT-W031

Scope

Item

Scope

W031

Refer to last page

Rev.No.

DRT

W031M

Remarks

Mechanical and Environmental

REVISION

SYM. GROUP No. DWG. No.

DRT

W031M

REVISION

MITSUMI ELECTRIC CO.,LTD.

Summary of content (5 pages)

PAGE 1
( MANUAL W031 0 1 ) / ( 5 ) APPROVED BY CHECKED BY WRITTEN BY DRT-W031 2019.2.7 2019.2.7 Tsuchida Takeo DWG. No. Rev.No. This Product Standard shall be applied to the RF Module (DRT-W031). Contents No 1. Scope Scope Item page 2 2. Product description Product description 2 3. Architecture Architecture Block diagram 2 2 4. Technical specifications Sub-GHz Radio Narrowband Interface (USA） 3 GPS capabilities 3 Mechanical and Environmental 3 REVISION 5.
PAGE 2
( 2 ) / ( 5 ) 1.Scope This specification is applied to the RF module:DRT-W031. This product is a module dedicated to Wireless LAN Module "DRT - Series" manufactured by Mitsumi Electric Co., Ltd. Installation on other products is not possible. Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module. 2.
PAGE 3
( 3 ) / ( 5 ) 4. Technical specifications Sub-GHz Radio Narrowband Interface (USA） Unit Item Radio protocol Radio modulation Data rate kbps Tx output power mW TX current mA Rx sensitivity (BER <1%) dBm Frequency Band MHz Channel Spacing Rx bandwidth kHz Data transmission Data encryptions Antenna - Description 802.15.4g – 6LoWPAN FHSS 100 500 ( +27dBm) 500 -94 902.42-927.
PAGE 4
( 4 5 ) / ( ) 5.Remarks The following information must be indicated on the host device of this module; [for FCC] Contains FCC ID: EW4DRTW031 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 5
( 5 ) / ( 5 ) 7．Revision Rev 0 Contents Initial Release (Formal issue) Date Name 2/7/2019 Takeo DWG. No. W031M MITSUMI ELECTRIC CO.,LTD. Rev.No.