User Manual Part 3

Mitsumi Electric Co., Ltd. Wavit11 User's Manual
106/108
CONFIDENTIAL
12. Troubleshooting
Situations Verifying Measures
Does Power LED light up? Connect AC Adapter to
Wavit11.
Connect AC Adapter to the
outlet.
Does LINK LED light up? Connect 10BASE-T cable
properly. Check 10BASE-T
cable polarity.
Does TX/RX LED light up? Install Wavit11 near the target
Wireless LAN, and confirm
the communication.
It does not work
Are the configuration settings
appropriate to meet the
condition of the target Wavit11?
By using configuration tool,
check configuration.
Is the channel settings
appropriately?
In Ad-Hoc mode, the same
should be set. Open the
configuration tool, and
confirm channel settings.
It does not communicate in
Ad-Hoc mode.
Are the encryption keys
appropriately set?
You need to set the same
encryption keys. Open the
configuration tool, and write
in encryption keys again.
Is the appropriate SSID set? You need to set the same SSID
with that of other
Wavit11.Open the
configuration tool, and
confirm the SSID.
It does not communicate in
802.11 Ad-Hoc mode.
Are the encryption keys
appropriately set?
You need to set the same
encryption keys. Open the
configuration tool, and write
in encryption keys again
Is the appropriate SSID set? You need to set the same SSID
with that of Access Point.
Open the configuration tool,
and confirm the SSID.
It does not communicate in
Infrastructure mode.
Are the encryption keys
appropriately set?
You need to set the same
encryption keys. Open the
configuration tool, and write
in encryption keys again
Is the channel set appropriately? You need to set the same
channel in Both mode. Open
the configuration tool, and
confirm channel settings.
It does not communicate in
Both mode.
Are the encryption keys
appropriately set?
You need to set the same
encryption keys. Open the
configuration tool, and write
in encryption keys again.
It does not communicate in
Access Point mode.
Does the SSID fit to the client
SSID?
You need to set the same SSID
with that of the client.
Open the configuration tool,
and confirm the SSID.