- Mitsumi Electronics Flat Panel Television User Manual

47
6
NetCommand
About NetCommand
• NetCommandhome-theatercontrolisavailableon
thefollowingmodels:
YseriesWD-Y577,WD-Y657
734seriesWD-57734,WD-65734,WD-73734.
Thischapterappliesonlytothesemodels.
• NetCommandsetupisoptional.
• YoucanperformNetCommandsetupwhentheTV
firstrecognizesadeviceduringAutoInputSensing
oratanyconvenienttimeafterward.
• NetCommandoperatesbysendingremotecontrol
signalsfromtheTVtoyourotherdevicesviatheIR
emitters,tellingthedevicestoplay,record,change
inputs,adjustvolume,changechannelsandmany
morefunctions.Allthisisaccomplishedwiththe
TV’sremotecontrolandtheslideswitchleftinthe
TV position.
• TheIR“Learning”featureofNetCommandallows
theTVtolearntheremotecontrolsignalsforyour
A/Vdevices.
• YoucanchoosethelevelofNetCommandcontrol
foryourhometheater.
Standard Setup. Performastandardsetupif
youwantNetCommandtocontrolonlyafew
devices,suchastheTV,aplaybackdevice(like
aDVDplayer),andacablebox.Withthissetup,
youcanusetheTV’sremotecontroltooperate
thesedevices.
A/V Receiver Setup. PerformA/Vreceiver
setupifyouwantNetCommandto:
 ControlasurroundsoundA/Vreceiver.
 Automaticallychangeaudioinputselections
onanA/Vreceiverwhenyouchangeinputs
ontheTV.
Important Note on NetCommand
Be sure to connect the IR emitter cable to the
TV and properly place the emitters so that
Netcommand can control your devices. See the
explanation on the following page.