user manual

5 - 25 No. 99MBC095A
5. MEASUREMENT MODE
• Confirming the statistical data on the display (not always required)
PROG
BUSY
RUN
+NG
GO
-NG
Press the
SHIFT
and
STAT/S.E
keys in the ready state to
enter the statistical display mode for Program No.0. If
this mode is entered, the number of samples is dis-
played first.
Each time the
ENT
key is pressed, the statistical processing item changes in the following
order: Number of samples: → Standard deviation: → Maximum value: →
Minimum value: → Mean: → Range: → Number of samples: .
PROG
BUSY
RUN
+NG
GO
-NG
Press the
SHIFT
and
STAT/S.E
keys to return to the
ready state, and confirm the statistical data of Program
No.1 in the same way.
• Printing the statistical data
Use the
SHIFT
and
S.PR/ PRINT
keys to print out the statistical data. This automatically
clears all of the statistical memory after printout.
An example printout is shown below.
An example printout
P:0
P:1
P:0
P:1
STAT.
-NG
-NG
+NG
+NG
DATA
5.989,9
5.984,9
6.010,1
10.000,1
PROGRAM NO. =
N
AVG
MAX
MIN
R
S.D
0
10
6.003,2
6.010,4
5.989,9
0.020,5
0.007,85
PROGRAM NO. =
N
AVG
MAX
MIN
R
S.D
1
10
9.993,6
10.000,1
9.984,9
0.015,2
0.006,99
STAT. DATA