Instructions / Assembly
Table Of Contents
- GENERAL
- INSTALLATION
- STEP 1. Remove the table lamp and parts from the Carton.
- STEP 2. Attach the glass shade onto the socket, then secure it with thumb screws.
- STEP 3. Install the Lamp. This fixture is rated for 7 watt LED type T lamp. DO NOT EXCEED RECOMMENDED WATTAGE
- STEP 4. Plug cord into a qualified socket of properly rated voltage.
- STEP 5. On/Off switch installed on cord.
- CLEANING
- ASSEMBLY AND MOUNTING DIAGRAM
HL527401 NETTIE TABLE LAMP
www.hudsonvalleylighting.com/mitzi| #mymitzi
ASSEMBLY AND MOUNTING INSTRUCTIONS
GENERAL
•
WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC
POWER OFF BEFORE INSTALLING, CLEANING, OR OTHER
MAINTENANCE.
•
FAILURE TO INSTALL FIXTURE CORRECTLY COULD
RESULT IN SERIOUS INJURY OR DEATH
•
READ ALL INSTRUCTIONS BEFORE STARTING
INSTALLATION.
•
BEFORE DISCARDING THE CARTON DOUBLE CHECK THE
PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN
FOUND.
INSTALLATION
STEP 1. Remove the table lamp and parts from the Carton.
STEP 2. Attach the glass shade onto the socket, then secure it with
thumb screws.
STEP 3. Install the Lamp. This fixture is rated for 7 watt LED type T
lamp. DO NOT EXCEED RECOMMENDED WATTAGE
STEP 4. Plug cord into a qualified socket of properly rated voltage.
STEP 5. On/Off switch installed on cord.
CLEANING
Please clean with a soft, dry cloth ONLY! Do not use cleaning products
ASSEMBLY AND MOUNTING DIAGRAM
THUMB SCREW
GLASS
LAMP
BASE ASSEMBLY
PLUG