User Manual

16
5.13 USB Driver
After being connected to PC, password interface shows up, please enter the
password (default password is 000000), the camera will be recognized by
the computer.
5.14 Playback
1) In playback mode, PRESS OK ( ) to pause/resume playback; PRESS
Scroll-Up ( ) button to rewind, PRESS Scroll-down ( ) button to fast
forward, then PRESS OK ( ) to play normally. You can fast forward or
rewind 2x, 4x, 8x, 16x, 32x, 64x, 128x.
2) Exit the Playback mode:
In Playback mode, PRESS Record ( ) button to get back to standby mode
step by step.
5.15 External Mini Camera (optional)
Connect the external camera to USB port, the audio and video signal input
will be switched to external camera automatically. Meanwhile, the external
camera can be controlled by the main body camera.
Drive-by-wire button operating instructions: When the camera is in standby
mode: A, HOLD the button for 3 seconds to have the external camera
start/stop video recording; B, PRESS the button to take a picture through
external camera.
5.16 Charging
When camera batter is low, the battery icon will flash in the display, and you
will hear a alert tone. When this happens, charge the camera.
While camera is charging, indicator lights blue and will turn off after camera
is fully charged. It will take approximately 4 hours to fully charge the
camera.
Charging methods:
1). Use a USB cable to connect camera’s USB port to one of the following: