User's Manual

Confidential
User Manual
Miwa Lock Co.,Ltd.
2/4
1. APPLICATIONS
These specifications describe the ALV2 ENTRANCE READER “ALV2DCU・DP” which is a
reading device for exclusive use of the card key for Hotel Card Lock “ALV2” and manage the
guest room and the facilities of the Hotel.
These specifications cover the ALV2 ENTRANCE READER and if use with exclusive controller,
it enable to output relay signal to the automatic door and control board of the electric key.
2. SUMMARY
2-1. ALV2 ENTRANCE READER
(1) This is a card reader for exclusive use of the entrance of the Hotel Card Lock “ALV2”, which
reads key data of the card key and output the voltage signal.
(2) When a contact less IC card issued by card issuing machine installed in the front desk is
used, it collates the various information such as a Hotel cord and room number with stored
data. If the card is confirmed valid, it output the signal to the exclusive controller.
3. GENERAL SPECIFICATIONS
3-1. Physical Specifications
Dimensions 120mm(W), 162mm(H), 58.8mm(D)
Weight 400g approximately
3-2. Electrical Specifications
Power supply 3.0Vdc is supplied from the exclusive controller.
Signal output Lock/unlock signal is sent to the exclusive controller.
3-3. Environmental Specifications
Operation temperature -5～+50°C
Operation humidity 20～80%RH without condensation