Installation Guide

Document Version: 11 10 | P a g e
© 2016 MiX Telematics International (Pty) Ltd.
Figure 3: Position the SIM as shown on the unit.
Figure 4: Insert the SIM card into SIM card slot; ensure it is fully seated (clicks into place).
Figure 5: Clip the cover back on; the hooks need to click into place.
5.3 Configuration of unit
The MiX 4000 is configured with default fleet settings during commissioning. It is possible to make over the
air (OTA) changes to some settings via the MiX Fleet Manager software interface.