Installation Guide

Document Version: 11 15 | P a g e
© 2016 MiX Telematics International (Pty) Ltd.
The pin layout and wire colours of the various harness options as well as detailed tables describing pin
functions are shown below.
6.5.1 Harness Part Numbers
440FT0033
Main Harness MP10
440FT0032
Code Plug Harness with socket CP4
440FT0931
Serial Harness SR1
440FT0933
External GNSS Antenna PA2
440FT0816
OBDII Main Harness MP4
440FT0073
FM Driver ID Plug (Blue)
6.5.2 Main Harness
Connector viewed from the back (wiring side) of harness (440FT0033)
PIN
Colour
Name
Function
Application Information
1
Red
BAT+
Vehicle battery +
Connect to vehicle battery +12V to +24V.
Must be protected with the provided 7.5 amp
slow blow fuse, or a similar one already
present in the vehicles wiring.
2
Black
IGN
Ignition input
Connect to vehicle ignition switch.
Must be protected with a 1 amp fuse.
3
White/Violet
ANALOG1
Analogue input 1
Maximum signal voltage = 38V.
Do not connect signals from unsuppressed
inductive sources such as relay coils (where
severe voltage spikes can be generated).
4
White/Red
ANALOG2
Analogue input 2
5
Dark Green
RPM
RPM (Input 4)
Frequency Input.
Maximum signal voltage level = 38V.
6
Blue/White
SPEED
Speed (Input 3)
7
Red/Blue
POSD3
Ext. Relay Drive 1
Load current must not exceed 250 mA
Output controlled by MiX 4000 and selected
in Vehicle Properties of frontend user
software.
8
Brown/Blue
POSD4
Immobiliser Relay
Load current must not exceed 250 mA
Output controlled by MiX 4000 and selected
in Vehicle Properties of frontend user
software.
9
Brown
GND
Ground
Connect directly to vehicle ground.