Installation Guide

Document Version: 11 32 | P a g e
© 2016 MiX Telematics International (Pty) Ltd.
15.2.2 GSM LED flash codes (RED)
No communication settings received (LED mostly ON)
GSM OFF
RED LED: OFF
GSM ON, searching for network*
1 second repeat
RED LED: Mostly ON with some
OFF time once every second
SMS only
2 second repeat
RED LED: Almost completely
ON with one short OFF blip once
every two seconds
GPRS ready
2 second repeat
RED LED: Almost completely
ON with three short OFF blips
once every two seconds
GSM Connected
2 second repeat
RED LED: Almost completely
ON with two short OFF blips once
every two seconds
Communication settings received (LED mostly OFF)
GSM OFF
RED LED: OFF
GSM ON, searching for network
1 second repeat
RED LED: Mostly OFF with
some ON time once every
second
SMS only
2 second repeat
RED LED: Almost completely
OFF with 1 short ON blip once
every two seconds
GPRS ready
2 second repeat
RED LED: Almost completely
OFF with 3 short ON blips once
every two seconds
GSM Connected
2 second repeat
RED LED: Almost completely
OFF with 2 short ON blips once
every two seconds
16 Testing Installation
16.1 Test Drive
Disarm the system by inserting the blue plug into the Code Plug socket.
 Wait for the audible signal.
 Remove the plug.
 Start the engine.
 Carry out a test drive.
17 Closing Steps
 Check all relevant vehicle functions.
 Explain the functions of the MiX 4000 system to the user.