TRUE WIRELESS StreamBuds Dots Lite ™ True Wireless Earbuds HOW TO GUIDE
THANKS! Thanks for choosing our Mixx StreamBuds Dots Lite. All of our products come with a 2 year warranty for peace of mind. Feedback is welcome, email us on support@mixx-io.com for any comments or queries.
CONTENTS LET’S START 1 LET’S CONNECT 3 LET’S ASK GOOGLE / SIRI 4 LET’S USE THE EQ SETTINGS 4 LET’S STAY CHARGED 5 LET’S PLAY 7 TECHNICAL SPECS CONTACT 9 MIXX 9 NEED EXTRA HELP? 10 LET’S BE SAFE 11 LET’S RECYCLE 12 SAFE USAGE INFO 14 HOW TO GUIDE EN
LET’S START What’s in the box? A pair of earbuds L 1 R 2 3 4 5 6 1
7 1 Left Touch Sensor 2 Earbud LED Lights / Microphones 3 Right Touch Sensor 4 Portable Charging Case 5 USB Type C Charging Port (Back) 6 LED Digital Display and Charge Indicators 7 USB Type C Charging Cable 2 HOW TO GUIDE EN
LET’S CONNECT First time pairing Automatic dual pairing 1 3 “Power on, pairing” When you open the Portable Charging Case 4 both earbuds will turn on and connect together. A voice prompt will confirm with ‘Power on, pairing’. One Earbud LED Light 2 will flash WHITE to indicate pairing mode. Go to the Bluetooth settings on your audio device to select ‘MIXX StreamBuds Dots Lite’ from the list. Once paired successfully you will hear ‘Connected’ and the Earbud LED Lights 2 will turn off.
LET’S ASK GOOGLE ASSISTANT / SIRI Pair your Bluetooth device with your earbuds. Double tap RIGHT Touch Sensor 3 to activate Siri or Google Assistant. The voice assistant familiar ‘Beep’ will sound to confirm connection. You can now ask Siri or Google Assistant a question or state a command. LET’S USE THE PRESET EQ SETTINGS Choose from 3 Equalisation (EQ) modes to suit your personal preference. There is no App required. • Bass boost mode increases the bass sound.
LET’S STAY CHARGED L B R The Earbuds A voice prompt ‘Battery low’ allows for 2 minutes play time before the earbud powers down stating ‘Battery low, power off’. The Earbuds LED Light 2 will flash WHITE for 1 second and will then switch off. Each LEFT and RIGHT earbud has 4-line LED Charge Indicators L and R on the case. Place the earbuds in the case and close the lid to charge. The 4 LED indicators L and R will flash to show that the earbuds are charging. Each LED represents 25% charge.
The Portable Charging Case To check the battery status of the case, open the lid of the Portable Charging Case 4 . The LED Digital Display B will show the percentage of the battery remaining for 30 seconds. Charge the case with a Type C charging cable Always connect the case to a suitable USB wall charger, computer USB port or a power bank using the USB Type C charging cable 7 supplied. When the LED Digital Display B number reaches 100 (i.e., 100%) the case is fully charged, and the display will switch off.
LET’S PLAY L R 1 3 First initial pairing Remove both earbuds from the charging case. Go to the Bluetooth settings on your audio device to select ‘MIXX StreamBuds Dots Lite’ from the list. Once paired you will hear ‘Connected’.
Activate Siri / Google Assistant Double tap RIGHT Touch Sensor 3 The voice assistant familiar ‘Beep’ will sound then ask a question or state a command. Change the Preset Equalisation (EQ) Settings Double tap LEFT Touch Sensor 1 to cycle through the Music, Bass Boost and Voice modes to find your preferred sound.
TECHNICAL SPECS Play time on a single charge: Play time with charging case: Bluetooth: Supported profiles: Wireless range: Earbud capacity: Charge case capacity: Standby: Up to 7 hours Up to 28 hours Version 5.1 HSP, HFP, A2DP, AVRCP 10m 40mAh each side 300mAh 120 days Dynamic driver: Frequency response: Weight including case: Portable case dims: 10mm 20Hz – 20KHz Total 56g (earbuds 4.
NEED EXTRA HELP? Common solutions If you are experiencing problems with your earbuds: • Power on the earbuds (see page 8). • Check the status on the LED Lights (see page 5-6). • Charge the earbuds (see page 5-6). • Move your device closer to the earbuds and away from any obstructions or interference. • Try connecting to another device. Question & Answers Q. How do I turn on my earbuds without using the charging case? A. Long press for 2 seconds both Touch Sensors to manually turn them on. Q.
LET’S BE SAFE It’s important that you read this section completely, especially the ‘Warning, Caution and Safe Usage’ instructions. For your protection Ensure the product is correctly connected using the manufacturer’s original accessories included with the product. Please keep the product out of reach from children and animals. Do NOT listen to loud music for a long duration of time. • We recommend turning down the volume before placing the device in or on your ears.
IMPORTANT! Do NOT use a non-certified PD or QC3 wall charger as this may damage the product. Only use the cable supplied to charge your device. May contains small parts which may be a choking hazard. NOT suitable for children under age 6. NOTE: If your product has become damaged in any way, does not operate normally or has been dropped, please refer to a qualified person to have the product checked before continuing to use it. WARNING: The operating temperature range for this product is 5º - 40º celsius.
To view our wide range of power banks, chargers, cables and in-car products visit mixxcharge.
SAFE USAGE INFORMATION Do not crush, puncture or incinerate the charging case or the earbuds. Only use certified or device manufacturer’s charging cable. @ support@mixx-io.com mixxaudio.com MIXX Limited 5 The Pavilions, Brighton Road, Pease Pottage, West Sussex, RH11 9BJ.
