User's Manual

ManualsBrandsMiyoshi ManualsElectronicsDigital SRS Transmitter

Table Of Contents

空白页面

ENGLISH

IN/OUTDOOR USE

USER MANUAL

MIYOSHI : DIGITAL SRS TRANSMITTER

TRANSMITTER & CAMERA

WHAT’S IN THE SYSTEM

1. DIGITAL SRS TRANSMITTER (1x)

• Modulation form: COFDM

• Frequency Range: 2.405-2.475GHz

• Channel Number: 15 channels

• Modulation Type: COFDM

2. SRS ANTENNA (1x)

• External Antenna, 5.5dBi (Max.)

SRS MINI-CAMERA (1x)

DESCRIPTION

THANK YOU FOR BUYING THIS QUALITY PRODUCT. THIS GUIDE ONLY COVERS THE BASIC PARTS IDENTIFICATION,

CONNECTION AND INSTALLATION. FOR MORE SPECIFIC INFORMATION, OPERATION AND OF ANY KIND, KINDLY

CONTACT THE DISTRIBUTOR.

THE DIGITAL SRS TRANSMITTER

PERFORMS THE TRANSMISSION

OF VIDEO FEED FROM A LOCAL

CAMERA TO A REMOTE

COMMAND CENTER.

THE CAMERA AND THE

TRANSMITTER ARE HIGHLY

PORTABLE AND WEARABLE.

THEY ONLY REQUIRE TO BE

COMPATIBLE POWER SUPPLY.

NO TOOLS ARE REQUIRED FOR NORMAL OPERATION.

DRAWING IS NOT TO SCALE!

Summary of content (5 pages)

PAGE 1
MIYOSHI : DIGITAL SRS TRANSMITTER TRANSMITTER & CAMERA ENGLISH IN/OUTDOOR USE USER MANUAL WHAT’S IN THE SYSTEM 1. 2. 3. DIGITAL SRS TRANSMITTER (1x) • Modulation form: COFDM • Frequency Range: 2.405-2.475GHz • Channel Number: 15 channels • Modulation Type: COFDM SRS ANTENNA (1x) • External Antenna, 5.5dBi (Max.) SRS MINI-CAMERA (1x) THANK YOU FOR BUYING THIS QUALITY PRODUCT. THIS GUIDE ONLY COVERS THE BASIC PARTS IDENTIFICATION, CONNECTION AND INSTALLATION.
PAGE 2
SAFETY FIRST BEFORE USING THIS PRODUCT, PLEASE READ THE INSTRUCTIONS CAREFULLY AND KEEP THEM ON HAND FOR FUTURE REFERENCE. FAILURE TO FOLLOW ANY PRECAUTIONS MAY RESULT TO DAMAGE, INJURY OR EVEN DEATH. ! WARNING!!! THE SRS TRANSMITTER IS A SENSITIVE RF EQUIPMENT. IT IS REQUIRED THAT THE SRS ANTENNA BE CONNECTED FIRST BEFORE POWERING-ON THE TRANSMITTER. THE SRS SYSTEM SHALL NOT BE EXPOSED TO EXCESSIVE HEAT SUCH AS PROLONGED SUNSHINE, FIRE OR SIMILAR. RESPECT THE SAFETY STANDARD OF OPERATION.
PAGE 3
STEP 2 : CONNECT THE MINI-CAMERA TO THE SRS TRANSMITTER PLUG THE BNC CONNECTOR OF THE SRS MINI-CAMERA TO THE BNC CONNECTOR OF THE SRS TRANSMITTER. ALIGN THE RED DOTS WHEN PLUGGING. PLUG THE LEMO CONNECTOR OF THE SRS MINI-CAMERA TO THE LEMO CONNECTOR OF THE SRS TRANSMITTER. ENSURE THAT THE CONNECTOR LOCKING MECHANISM IS SECURE FASTENED. ILLUSTRATION IS NOT TO 100% SCALE! USAGE OF THIS PRODUCT IS VERY STRAIGHT-FORWARD AND REQUIRES LITTLE SKILL TO OPERATE.
PAGE 4
STEP 3 : CONNECT A 12V POWERSUPPLY TO THE SRS TRANSMITTER OBSERVE PROPER POLARITY. PLUG THE LEMO CONNECTOR OF THE SRS TRANSMITTER TO A COMPATIBLE 12V DC POWERSUPPLY SOURCE AN ADAPTER MAY BE NEEDED!!! STEP 4 : CONFIRM THAT THE TRANSMITTER IS POWERED UP. • OBSERVE THE FAN IF IT IS ROTATING AS INDICATION. • SOME HEAT IS ALSO GENERATED BY THE TRANSMITTER AND CAMERA. USAGE OF THIS PRODUCT IS VERY STRAIGHT-FORWARD AND REQUIRES LITTLE SKILL TO OPERATE.
PAGE 5
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.