Instruction Manual

A)DISPLAY

*Date & Day of the week position may be located at different position depends on models.

B) SETTING THE TIME

1. Pull the crown out to the 2nd position.

2. Turn the crown to set hour and minute hands.

3. When the crown is pushed back to the normal position,

second hand begins to run.

C) SETTING THE DATE

1. Pull the crown out to the 1st position.

2. Turn the crown counter-clockwise to set the date.

* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may

not change on the following day.

3. After the date has been set, push the crown back to the normal position.

Cal. 2105 Instruction manual

Hour hand

Minute hand

Normal crown

position

1st position

Second hand

*Date

2nd position

*Day of the week

1/2

PAGE 1
Cal. 2105 Instruction manual A)DISPLAY Minute hand Hour hand 2nd position 1st position Second hand Normal crown position *Date *Day of the week *Date & Day of the week position may be located at different position depends on models. B) SETTING THE TIME 1. Pull the crown out to the 2nd position. 2. Turn the crown to set hour and minute hands. 3. When the crown is pushed back to the normal position, second hand begins to run. C) SETTING THE DATE 1. Pull the crown out to the 1st position. 2.
PAGE 2
D) SETTING THE DATE OF THE WEEK 1. Pull the crown out to the 1st position. 2. Turn the crown clockwise to set the day of the week. * If the date is set between the hours of around 9:00 PM and 1:00 AM, the day of the week may not change the following day. 3. After the day of the week has been set, push the crown back to the normal position. These specifications might be changed without prior notice.