Instruction Manual

CHRONOGRAPH GRANDE with DAY/DATE

【Displays and Buttons】

A) SETTING THE TIME

1. Pull the crown out to the 2nd Click Position.

2. Turn the crown clockwise to set hour and minute hands.

3. After the time has been set, push the crown back to the Normal position.

B) SETTING THE DATE

1. Pull the crown out to the 1st Click Position.

2. Turn the crown clockwise to set the date.

* If the date is set between the hours of around 9:00 PM and 1:00 AM,

the date may not change on the following day.

3. After the date has been set, push the crown back to the Normal position.

Cal. 6S00 Instruction manual

Second hand

Chronograph

1/20 second hand

Day & Date

Chronograph

second hand

Button "A"

Button "B"

Normal

1st

2nd

Chronograph

minute hand

1/3

PAGE 1
Cal. 6S00 Instruction manual CHRONOGRAPH GRANDE with DAY/DATE 【Displays and Buttons】 Chronograph 1/20 second hand Chronograph second hand Button "A" Normal Chronograph minute hand 1st 2nd Day & Date Button "B" Second hand A) SETTING THE TIME 1. Pull the crown out to the 2nd Click Position. 2. Turn the crown clockwise to set hour and minute hands. 3. After the time has been set, push the crown back to the Normal position. B) SETTING THE DATE 1. Pull the crown out to the 1st Click Position. 2.
PAGE 2
C) SETTING THE DAY 1. Pull the crown out to the 1st Click Position. 2. Turn the crown anti-clockwise to set the day. * If the day is set between the hours of around 11:15 PM and 6:00 AM, the day may not change on the following day. 3. After the day has been set, push the crown back to the Normal position. D) USING THE CHRONOGRAPH This chronograph is able to measure and display time in 1/20 second united up to maximum of 59min 59sec.
PAGE 3
E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY) This procedure shoud be performed when the chronograph second hand does not return to the Zero position. 1. Pull the crown out to the 2nd Click Position. 2. Press the button "A" once to set the chronograph second hand to the Zero position. 3. Press the button "B" once to set the chronograph 1/20 second hand to the Zero position. * The chronograph hands can be advanced rapidly by continuously pressing button "A" or "B". 4.