Instruction Manual

FUNCTION: CHRONOGRAPH TIMING UP TO 59 MINUTES 59 SECONDS.

(CENTER SECOND HAND, 1/20 SEC SMALL HAND, MINUTE HAND)

A) DISPLAYS AND BUTTONS

B) SETTING THE TIME

C) SETTING THE DATE

D) USING THE CHRONOGRAPH

E) CHRONOGRAPH RESET (INC. AFTER REPLACING BATTERY)

A) DISPLAYS AND BUTTONS

B) SETTING THE TIME

1. Pull the crown out to the 2nd Click Position.

2. Turn the crown clockwise to set hour and minute hands.

3. After the time has been set, push the crown back to the Normal position.

Cal. 6S50 Instruction manual

Normal Position

Chronograph

second hand

Button A

Button B

Minute hand

Chronograph 1/20 second hand

2nd Click Position

1st Click Position

Normal second hand

Chronograph

minute hand

Hour hand

Date

1/3

PAGE 1
Cal. 6S50 Instruction manual FUNCTION: CHRONOGRAPH TIMING UP TO 59 MINUTES 59 SECONDS. (CENTER SECOND HAND, 1/20 SEC SMALL HAND, MINUTE HAND) A) DISPLAYS AND BUTTONS B) SETTING THE TIME C) SETTING THE DATE D) USING THE CHRONOGRAPH E) CHRONOGRAPH RESET (INC.
PAGE 2
C) SETTING THE DATE 1. Pull the crown out to the 1st Click Position. 2. Turn the crown clockwise to set the date. * If the date is set between the hours of around 9:00 PM and 3:00 AM, the date may not change on the following day. 3. After the date has been set, push the crown back to the Normal position. D) USING THE CHRONOGRAPH This chronograph is able to measure and display time in 1/20 second united up to maximum of 59min 59sec.
PAGE 3
E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY) This procedure shoud be performed when the chronograph second hand does not return to the Zero position. 1. Pull the crown out to the 2nd Click Position. 2. Press the button "A" once to set the chronograph second hand to the Zero position. 3. Press the button "B" once to set the chronograph 1/20 second hand to the Zero position. *The chronograph hands can be advanced rapidly by continuously pressing button "A" or "B". 4.