Instruction Manual

CHRONOGRAPH FUNCTION: CENTER CHRONOGRAPH SECOND HAND 1/1 sec.

Timing up to 11 hours 59 minutes 59 seconds.

A) DISPLAYS AND BUTTONS

B) SETTING THE TIME

C) SETTING THE DATE

D) USING THE CHRONOGRAPH

E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)

A) DISPLAYS AND BUTTONS

B) SETTING THE TIME

1. Pull the crown out to the 2nd position.

2. Turn the crown to set hour and minute hands.

3. When the crown is pushed back to the normal position, small second hand begins to run.

Cal. 0S10 Instruction manual

Chronograph

minute hand

Hour hand

Chronograph

hour hand

Chronograph second hand

Button

Minute hand

1st position

2nd position

Nomal crown

Calendar

Button B

Small Second hand

1/3

PAGE 1
Cal. 0S10 Instruction manual CHRONOGRAPH FUNCTION: CENTER CHRONOGRAPH SECOND HAND 1/1 sec. Timing up to 11 hours 59 minutes 59 seconds. A) DISPLAYS AND BUTTONS B) SETTING THE TIME C) SETTING THE DATE D) USING THE CHRONOGRAPH E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY) A) DISPLAYS AND BUTTONS Chronograph minute hand Chronograph second hand Button Hour hand Minute hand 1st position 2nd position Nomal crown Chronograph hour hand Calendar Button B Small Second hand B) SETTING THE TIME 1.
PAGE 2
C) SETTING THE DATE 1. Pull the crown out to the 1st position. 2. Turn the crown counter-clockwise to set the date. *If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day. 3. After the date has been set, push the crown back to the normal position. D) USING THE CHRONOGRAPH This chronograph is able to measure and display time in 1/1 second united up to maxinum of 11 hours 59 minutes 59 seconds.
PAGE 3
E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY) This procedure shoud be performed when the chronograph second hand does not return to zero position after the chronograph has been reset, and including after the battery has been replaced. 1. Pull the crown out to the 2nd position. 2. Press button "A" to set the chronograph second hand to the zero position. The chronograph hand can be advanced rapidly by continuously pressing button "A". 3.