Инструкция для MJX F29 Shuttle Перейти в карточку товара 8 800 775 98 98 л чит т нич ю н льт цию. гл т чн . Б з вы дны www.sotmarket.
ITEM NO.
Thank you for purchasing this product. Please read this manual carefully before use and retain it for future reference. Technical parameter of the helicopter Fuselage Length:430MM Gross Weight: about 235g Main Rotor Diameter: 350MM Overall height: 190MM Battery: Li-polymer 3.
Product/spare parts included in this packaging Description Helicopter Remote controller Manual Qty(pc) 1 1 1 Description Adaptor Rotor blade Qty(pc) 1 2 The LCD Remote controller Main features of the remote controller Microcomputer control LCD remote controller ,with the 2.4G auto connection technology, many helicopters can be operated simultaneously with high stability. Control the actions of upward,downward,forward, backward,leftward, rightward,turning left and turning right of the helicopter.
No. Function switch Function description 4 Trimmer B In stick Mod 2 and 3, it helps to tune the helicopter's sideward flight. In stick Mod 1 and 4,it helps to tune the helicopter's left and right direction turning speed. 5 Trimmer C In stick Mod 2 and 3, it helps to tune the helicopter's left and right direction turning speed. In stick Mod 1 and 4,it helps to tune the helicopter's sideward flight. 6 Trimmer D In stick Mod 1 and 3, this button is null.
stick to the top and then push it down to the bottom. The remote controller is activated once a beep sound is heard. Then, the indicator light keeps flashing while the remote controller is sending out connectional signal. It takes about 10 seconds to finish the signal transmission process. After signal transmission is completed, the indicator light keeps constant "on”.
clockwise or counterclockwise of the MENU/OK button.Press MENU/OK button to stop the blinking of RUDD icon and enter into the left/right turning speed setting interface.Turn clockwise of the MENU/OK button to increase the left/right turning speed and turn counter clockwise of the MENU/OK button to decrease the left/right turning speed.Press MENU/OK button to store the setting or Press EXIT/LIGHT button to cancel the setting.
Transmitter battery low power prompt When the power of the transmitter is weak, the battery power icon will keep blinking and send out beep sound to remind user to change new battery. The helicopter connector Stabilizer bar rotor blade servo searchlight power socket battery connector camera landing gear How to charge the helicopter Connect the charger to the AC power outlet, the indicator light will turn green.
Trimmer Functions If the helicopter keeps moving forward/backward even there is no control signal given, users may adjust the elevator trim to keep the helicopter balanced. STICK MOD 1 or 3: If the helicopter keeps moving backward, push up Trimmer A until it gains balance. If the helicopter keeps moving forward, push down Trimmer A until it gains balance. STICK MOD 2 or 4: If the helicopter keeps moving backward, push up Trimmer D until it gains balance.
STICK MOD 1 or 4: If the helicopter keeps moving leftward, turn right of Trimmer C until it gains balance. If the helicopter keeps moving righttward, turn left of Trimmer C until it gains balance. If the helicopter keeps spinning even there is no control signal given, users may adjust the rudder trim to keep the helicopter balanced. STICK MOD 1 or 4: If the helicopter keeps spinning counterclockwise in the air,turn right of Trimmer B until it gains balance.
Downward Push down the throttle control stick, the rotation speed of the mains rotors are decreasing and the helicopter descends accordingly. Turn left Turn the left/right turning control stick to the left,the helicopter will left. Turn right Turn the left/right turning control stick to the right,the helicopter will right. Forward When the helicopter is flying, push up the forward/backward control stick, the helicopter will move forward.
How to install the videography device Insert the TF memory card into the videography module.(Pic7) Fix the videography module onto the bottom of the helicopter by screws.(Pic8) Open the helicopter nose and insert the plug of the videography module into the video control socket, then, reinstall the helicopter nose.
MJX F29 Shuttle Описание ф мл ни дит нл н з 2 мин ты Д т в в м з нии Характеристики з в ии Д т в и гл л жб т чн я дд ж и л т вин и л т з з любым д бным б м тзывы ции и ид и