Инструкция для MJX F39 Shuttle Перейти в карточку товара 8 800 775 98 98 л чит т нич ю н льт цию. гл т чн . Б з вы дны www.sotmarket.
ITEM NO.
Thank you for purchasing this product. Please read this manual carefully before use and retain it for future reference. Technical parameter of the helicopter Fuselage Length:810MM Gross Weight: about 665g Main Rotor Diameter: 515MM Overall height: 315MM Battery: Li-polymer 7.
Product/spare parts included in this packaging Description Helicopter Remote controller Rotor blade Qty(pc) 1 1 2 Description Adaptor Manual Qty(pc) 1 1 The LCD Remote controller Main features of the remote controller Microcomputer control LCD remote controller ,with the 2.4G auto connection technology, many helicopters can be operated simultaneously with high stability. Control the actions of upward,downward,forward, backward,leftward, rightward,turning left and turning right of the helicopter.
No. Function switch Function description 4 Trimmer B In stick Mod 2 and 3, it helps to tune the helicopter's sideward flight. In stick Mod 1 and 4,it helps to tune the helicopter's left and right direction turning speed. 5 Trimmer C In stick Mod 2 and 3, it helps to tune the helicopter's left and right direction turning speed. In stick Mod 1 and 4,it helps to tune the helicopter's sideward flight. 6 Trimmer D In stick Mod 1 and 3, this button is null.
stick to the top and then push it down to the bottom. The remote controller is activated once a beep sound is heard. Then, the indicator light keeps flashing while the remote controller is sending out connectional signal. It takes about 10 seconds to finish the signal transmission process. After signal transmission is completed, the indicator light keeps constant "on”.
clockwise or counterclockwise of the MENU/OK button.Press MENU/OK button to stop the blinking of RUDD icon and enter into the left/right turning speed setting interface.Turn clockwise of the MENU/OK button to increase the left/right turning speed and turn counter clockwise of the MENU/OK button to decrease the left/right turning speed.Press MENU/OK button to store the setting or Press EXIT/LIGHT button to cancel the setting.
Transmitter battery low power prompt When the power of the transmitter is weak, the battery power icon will keep blinking and send out beep sound to remind user to change new battery.
Preparation for flight Insert the battery plug into the helicopter battery socket located at the right side of the helicopter, then, the indicator light of the helicopter will keep flashing rapidly, set the helicopter down to a platform. Slide the power switch to “ON” position. To activate the remote controller,slowly push up the throttle stick to the top and then push it down to the bottom. The remote controller is activated once you hear a beep sound.
Swash Platform of the swash Servo connector Parallel Extension line of the helicopter Pic7 Pic8 Trimmer Functions If the helicopter keeps moving forward/backward even there is no control signal given, users may adjust the elevator trim to keep the helicopter balanced. STICK MOD 1 or 3: If the helicopter keeps moving backward, push up Trimmer A until it gains balance. If the helicopter keeps moving forward, push down Trimmer A until it gains balance.
If the helicopter keeps moving righttward, turn left of Trimmer B until it gains balance. STICK MOD 1 or 4: If the helicopter keeps moving leftward, turn right of Trimmer C until it gains balance. If the helicopter keeps moving righttward, turn left of Trimmer C until it gains balance. If the helicopter keeps spinning even there is no control signal given, users may adjust the rudder trim to keep the helicopter balanced.
Operating Upward Push up the throttle control stick, the rotation speed of the mains rotors are increasing and the helicopter ascends accordingly. Downward Push down the throttle control stick, the rotation speed of the mains rotors are decreasing and the helicopter descends accordingly. Turn left Turn the left/right turning control stick to the left,the helicopter will left. Turn right Turn the left/right turning control stick to the right,the helicopter will right.
How to install the videography device Insert the TF memory card into the videography module.(Pic9) Fix the videography module onto the bottom of the helicopter by screws.(Pic10) Open the helicopter nose and insert the plug of the videography module into the video control socket, then, reinstall the helicopter nose.
MJX F39 Shuttle Описание ф мл ни дит нл н з 2 мин ты Д т в в м з нии Характеристики з в ии Д т в и гл л жб т чн я дд ж и л т вин и л т з з любым д бным б м тзывы ции и ид и
