Operation Manual

ONOFF
Pic.5
How to charge the helicopter by split charging device (Pic 3 & 4)
� Turn off the helicopter; unplug the battery cable from the helicopter.
� Insert the plug of the battery cable into the quadrate port of the charge controller (matching the plug to the port)
Insert the plug of the charger cable into the circular port of the charge controller, then, connect the plug of the charger
to AC power outlet to start charging.
Once charging is proceeding, the red power light of the charge controller is on. When charging is finished, both the red
light and green light of the charge controller are on.
Full charge takes about 3 hours.
How to charge the helicopter by all-in-one charging device (Pic 5)
� Turn off the helicopter.
� Unplug the battery cable from the helicopter, then, insert the plug of the battery cable into the port of the charger (matching
the plug to the port) to start charging.
� Once charging is proceeding, red light is on. When charging is finished, the red light will turn into green light.
Full charge takes about 2.5 hours.
Pic.3
Pic.4
Turn the power switch of the
helicopter to "OFF" position .
ONOFF
ONOFF