Thank you for purchasing this product. Please read this manual carefully before use and retain it for future reference. Technical parameter of the helicopter Fuselage Length:810MM Gross Weight: about 655g Overall height: 315MM Main Rotor Diameter: 515MM Motor: #370 Tail Rotor Diameter: 148MM Gear Ratio: 14:1 Battery: Li-polymer 7.4V Charging Time: about 3 hours Introduction 1.
Product/spare parts included in this packaging Description Qty(pc) Description Qty(pc) Helicopter 1 Adaptor 1 Manual 1 Remote controller 1 Rotor blade 2 TF memory card 1 1 Card reader Major parts servo camera Helicopter split charging device all-in-one charging device Charge the helicopter To meet the different demands from different customers worldwide, two different charging devices have been designed for charging.
How to charge the helicopter by all-in-one charging device. Turn off the helicopter. Unplug the battery cable from the helicopter, then, insert the plug of the battery cable into the port of the charger (matching the plug to the port) to start charging. Once charging is proceeding, red light is on. When charging is finished, the red light will turn into green light. Full charge takes about 3 hours. Preparation for flight 1.
Platform of the swash Swash Servo connector 2.
Hints 1.If the helicopter keeps self-rotating in the air even there is no control signal given, you could correct it by adjusting the trimmer of gyro on the remote control. 2.If the helicopter keeps flying forward/backward in the air even there is no control signal given, you could correct it by adjusting the trimmer on the remote control. Videography function Installed with camera device, the helicopter has videography function.
Trouble shooting Problem Reason Solution 1.The helicopter is underpowered. No reaction from the helicopter 1.Get the battery of the helicopter charged 2.The indicator light of the helicopter 2.Set the helicopter down to a platform, until the flashing rapidly, and the gyo is in indicator light turn to constant ”ON” without the testing statement blinking. 3.the helicopter and the transmitter is out of radio connection 7 3.Repeating the connection procedure.