Owner`s manual

MK-100 TROUBLESHOOTING

Movable Cutting Table Does Not Move Correctly

(A)

Check that the Guide Bar is

clean - clean if dirty.

(B)

Check the Movable Cutting

table Roller Wheels for wear,

replace if necessary.

Blade Stops Turning

(A)

Allow motor to cool and

depress motor Overload

Reset Switch.

(B)

Verify all plugs fully

installed. Check Ground

Fault Circuit Interrupter.

Verify circuit breaker at least 20 amps - if not, move to 20-amp circuit.

Verify circuit breaker not tripped. If tripped, reset once.

Check power source voltage is 120V - if not 120V, move to another circuit.

NOTE:

Blade will not cut properly

(A)

Check for smoothness

or "Glazing" (See Blade

Dressing Section)

(B)

Check for proper blade rota-

tion. Ensure arrow engraved on

blade matches the directional

arrow on Blade Guard.

(C)

Ensure the Blade Core is not

bent. Verify the blade is correct

for the material being used.