Owner`s manual
Table Of Contents
- MK-2005G Cover
- Introduction
- Table of Contents
- Safety
- Unpacking, Transport, Universal Stand and Assembly
- Setup, Startup, Adjustment, Operation and Shutdown
- Maintenance and Troubleshooting
- Maintenance
- New Maintenance
- Maintenance following Use
- Monthly Maintenance
- Six (6) Month Maintenance
- Yearly and Two Year Maintenance
- Blade Dressing
- Diamond Blade Change-out
- Movable Cutting Table Wheel Change Out
- Protective Wooden Strip Replacement
- Check Fuel Level
- Checking Oil Level
- Changing Oil
- Engine Air Filter Inspection, Cleaning and Replacement
- Fuel Sediment Cup Cleaning
- Spark Plug Adjustment and Replacement
- V-Belt Inspection, Adjustment and Replacement
- Troubleshooting
- Maintenance
- Exploded View and Parts List
- Theory
- Accessories
- Ordering and Return Instructions
MK-2005G Revision 1, Effective Date December 26, 2000
Page 18
SETUP, STARTUP, ADJUSTMENT, OPERATION and SHUTDOWN
STARTUP:
1. Engine Start:
1. Carbon monoxide gas is toxic. Breathing it can cause unconsciousness and/or death.
2. Avoid any areas or actions that expose you to carbon monoxide.
NOTE: If restarting a warm engine leave the Choke Lever in the OPEN position.
(C)
Move the Throttle Lever
to 1/3
rd
Open
(B)
Place Choke Lever in the
CLOSED position
(A)
Place Fuel Valve in the
ON position
(F)
Pull Starter Cord straight back
in a smooth fast motion
(E)
Pull Starter Cord slowly, until
slack is removed and
resistance is felt
(D)
Place Engine Switch
in the ON position
(G)
Place Choke Lever in the OPEN
position when engine is warm
Throttle Lever
Direction of
Movement
Fuel Valve
Direction of
Movement
Choke Lever
Direction of
Movement
Engine Switch
Direction of
Movement
Starter Cord
Direction of
Movement
Starter Cord
Direction of
Movement
Direction of
Movement
Choke Lever
Table of Contents