Owner`s manual

23
DO NOT FORCE THE TOOL. It will do the job better and safer at the rate for
which it was designed.
MK-660 TILE SAW OPERATION
CUTTING STRAIGHT EDGES
CAUTION
(A)
Loosen the adjustable Cutting
Guide retaining thumbscrew
(B)
Position the adjustable Cutting
Guide to desired cut length
indicated inside the diamond
(C)
Tighten the retaining thumbscrew
(D)
Place the tile against the
Ruler/Stop and Cutting Guide
(E)
Turn the motor ON
(F)
Verify ow on both sides of the
blade (See Maintenance Section
to adjust ow)
(G)
Perform the cut
(H)
Turn the motor OFF when
work is complete