Operator`s manual
14
MK-4000 SERIES PRODUCT SPECIFICATIONS
ENGINE SPECIFICATIONS
Kubota (Diesel) Water Cooled
Engine
The 44Hp Kubota V1505-T-E3B is a 4 cylinder in-line, diesel fueled, turbo-charged, liquid-cooled engine. It is fuel efcient, altitude
compensating, has low emissions and meets all EPA and CARB requirements. The engine is 1498cc in displacement and features
Kubota’s Three Vortec Combustion system, which produces an ideal air/fuel mixture that provides increased combustion ef-
ciency and cleaner exhaust.
Power
V15O5-T-E3B* (44 Hp)
Weight
1,080 lbs. (490 kg)
Model MK-4018KB MK-4024KB MK-4030KB MK-4036KB
Blade Capacity
18" (457 mm) 24" (610 mm) 30" (762 mm) 36" (914 mm)
Blade RPM
2,300 2,000 1,750 1,450
Depth of Cut
7" 9-1/2" 12-1/2" 15"
Part#
167420-18 167420-24 167420-30 167420-36
Hyundai (Gas) Water Cooled
Engine
The 48Hp Hyundai 416 is a 4 cylinder in-line, DOHC, gasoline fueled, spark-ignited, liquid-cooled engine. It is computer-controlled, fuel
efcient, multi-port fuel injected, has low emissions and meets all EPA and CARB requirements. The engine utilizes a check engine light
to provide diagnostic codes through a connector. This engine is 1599cc in displacement with a 10.1 to 1 compression ratio. It features
a cast iron engine block and a cast aluminum head. This is a super quiet, powerful, low vibration, state of the art engine.
Power
ZPP-416* (48 Hp)
Weight
1,120 lbs. (510 kg)
Model MK-4018HY MK-4024HY MK-4030HY MK-4036HY
Blade Capacity
18" (457 mm) 24" (610 mm) 30" (762 mm) 36" (914 mm)
Blade RPM
2,300 2,000 1,750 1,450
Depth of Cut
7" 9-1/2" 12-1/2" 15"
Part#
167169-18 167196-24 167196-30 167196-36
Features
• Totally enclosed and sealed blade shaft with continuous oil bath lubrication system
• Control set provides proportional blade raising/lowering and travel speed with one hand operation
• Quick release, auto-latching bayonet mount blade guard
• Blade guard uses “ride on the blade” water tubes for superior water delivery and blade cooling
• Eaton model 6 Hydrostatic transmission coupled to an MK differentiating trans-axle
• Saw designed for left or right side mounting of blade and blade guard
• Differential lock (for cutting on slippery surfaces) and free wheel/engage controls (to allow the saw to be pushed manually)
• Three-position adjustable solid steel handlebars
• Rigid frame front pointer with high visibility guide wheel for accurate tracking
• 7 3VX V-belt drive from engine to blade shaft
• Travel Speed: 0-220 FPM Forward, 0-100 FPM Reverse
• Fuel Capacity: 5.75 gallons
*Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. MK Diamond Products makes no claim, representation or warranty as to the power
rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy or the engine power rating. Users are advised to consult the engine manufacturer’s
owners manual and website for specic information regarding the engine power rating.