Product specifications

10
PX-3
Revision 01/04, Effective Date January 23, 2004
11
PX-3
Revision 01/04, Effective Date January 23, 2004
SAFETY
PRODUCT SPECIFICATIONS
The PX-3 is a versatile lightweight, dry, masonry saw. Operated and used according to this manual, the PX-3
will provide years of dependable service.
General Description
Motor Specifications
Blade Capacity:
Paver Types:
The PX-3 Paver Xtreme is engineered as a 14” dry saw, consisting of a powerful 115v motor in a hard plastic
case. The saw has a five (5) inch cutting depth.
Motor specifications for the PX-3 are listed in TABLE 3 below.
Voltage 115V
Overall Amperage 13 A
Frequency 60Hz
RPM 3500 rpm
Table 3
The PX-3 uses a specially designed 14-inch diameter segmented dry MK Diamond blade with a 0.110 in. cutting
width.
The PX-3 can cut a variety of masonry types including slump stone block, wall brick, paver brick, roofing tile,
marble, granite, decorative rock, or almost any other non-ferrous material.
NOTE:
The PX-3 is not designed to cut plastic or ferrous (metals) material.
Lockable Trigger Switch:
The PX-3 is designed with a lockable trigger-operating switch in the handle to allow for ease of operation.
Removable Motor Air Filter
The PX-3 is designed with an easy clean motor air filter to extend the life of the motor.
Replaceable Motor Brushes:
The PX-3 is designed with replaceable motor brushes to extend operating life.
Dust Collector:
The PX-3 is designed with a Dust Collector nozzle that can be used to remove dust from the Cutting Area, using
your shop vacuum’s 2-1/2 inch diameter hose.