Product specifications

(D)
Install Blade Retaining Screw
and Outer Flange – tighten.
12
PX-3
Revision 01/04, Effective Date January 23, 2004
13
PX-3
Revision 01/04, Effective Date January 23, 2004
UNPACKING, TRANSPORT, UNIVERSAL STAND and ASSEMBLY
ASSEMBLY:
Follow the assembly instructions to prepare your PX-3 for operation.
1. Diamond Blade Installation
NOTE: When installing the Retaining Screw, do not "cross-thread" and DO NOT over tighten the screw.
(B)
Remove Blade Retaining
Screw and Outer Flange.
(A)
Identify Blade Retaining
Screw and Outer Flange.
(C)
Install and seat Blade –verify
rotation.
2. Dust Nozzle
Dust Nozzle
Attach Dust Nozzle with
Shoulder Thumb Screw
and Washer Nut
The PX-3 Dust Nozzle assists on the removal of dust and debris from the cutting area. Its shape is designed
so it directs the flow of these particles to the shop vac hose (NOT INCLUDED). The hose required is a 2-1/2" in
diameter. Connect the hose from your shop vac (NOT INCLUDED) to the Dust Collector Outlet located at the
rear of the PX-3 Cutting Area.