Product specifications

20
PX-3
Revision 01/04, Effective Date January 23, 2004
21
PX-3
Revision 01/04, Effective Date January 23, 2004
MAINTENANCE AND TROUBLESHOOTING
Change the Diamond Blade when it becomes worn, cracked, or damaged. The following section describes the
correct procedure for changing out the Diamond Blade.
DIAMOND BLADE CHANGE OUT
(B)
Remove Retaining Nut and
Outer Flange
(A)
Unplug the PX-3 from its
Power Source
(C)
Remove Diamond Blade from
Blade Shaft
(E)
Install the Retaining Nut and
Outer Flange and then tighten
using the Blade and Shaft
Wrenches
(D)
Install the Diamond Blade
onto Blade Shaft. Ensure that
it is seated properly on the
Flange.
Disconnect the tool before servicing and when changing accessories, such as blades, bits, cutters, and
the like.
WARNING
!