Product specifications

6
PX-3
Revision 01/04, Effective Date January 23, 2004
7
PX-3
Revision 01/04, Effective Date January 23, 2004
Sawing and drilling generates dust. Excessive airborne particles may cause irritation to eyes,
skin and respiratory tract. To avoid breathing impairment, always employ dust controls and
protection suitable to the material being sawed or drilled; See OSHA (29 CFR Part 1910.1200). Diamond
Blades improperly used are dangerous. Comply with American National Standards Institute Safety Code, B7.1
and, Occupational Safety and Health Act covering Speed, Safety Guards, Flanges, Mounting Procedures,
General Operating Rules, Handling, Storage and General Machine Conditions
Hazard Symbols:
Never touch electrical wires or components while the engine is running. They can be sources of
electrical shock which could cause severe injury or burns.
(
(
)
)
on
Electrical Shock!
Keep hands, feet, hair, and clothing away from all moving parts to prevent injury. Never operate the
engine with covers, shrouds, or guards removed.
(
(
)
)
on
Rotating Parts!
Never tamper with the governor components or settings to increase the maximum speed. Severe
personal injury and damage to the engine or equipment can result if operated at speeds above
maximum.
(
(
)
)
on
(
(
)
)
on
Over Speed!
WARNING
!
SAFETY