Manual

BX-4 23

SETUP, ADJUSTMENT & OPERATION

6. CLEANUP:

• Pull straight back to remove the Motor Filter Cap (1).

• Pull Foam Filter (2) out of the Filter Cap,

(Clean Foam Filter by tapping it on a hard surface

or by using compressed air to dislodge dirt).

• Reinstall the Foam Filter into the Filter Cap.

• Align the Filter Cap Retaining Hole with the Spacer

Pins (3). Push the Filter Cap (1) onto the Spacer

Pins to seat onto Motor.

• Clean the Movable Cutting Table Roller Wheels

and Guide Rails.

* Clean build up of debris from Splash Curtain.

• Clean the remainder of the BX-4 with a clean cloth.

• Always wear eye protection when using compressed air.

• Disconnect unit from power supply & unplug GFCI from BX-4.

WARNING