Manual

BX-4 35

Disconnect unit from power supply.

CAUTION

REPLACEMENT OF PUMP:

Step A: Using 4 mm hex key, remove 4 Pump cover

Retaining Screws.

Step B: Remove pump cover (1).

Step C: Disconnect electric terminals from pump.

Remove tubes from both ends of pump. (Visually inspect

tube condition. Replace tubes, if necessary).

Step D: Re-connect electric terminals & tubes to pump.

Step E: Secure tubes with tube clamps.

Step F: Position & hold pump in the Cutting Head with

Pump Cover (1). Secure all screws.

Bent or kinked tubes may prevent free ow of water and

may shorten pump life.

CAUTION

MISTING SYSTEM OPERATION, MAINTENANCE & TROUBLESHOOTING

Cutting

Head