Manual

BX-436
NO MIST:
Step A: Check Pump Switch & Saw are on.
Step B: Remove Nozzle & inspect. Nozzle should be open & free of all debris
Step C: Inspect water intake lter. Ensure lter is free of excess debris & water
in container is clean.
Step D: Ensure tubing is undamaged & free of kinks or sharp bends.
Step E: Check tubing connectors to ensure tubing is fully inserted in connector.
Step F: Check Pump to ensure it is operating properly. If not, contact MK Diamond.
MISTING SYSTEM TROUBLESHOOTING